[U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Chee, Tien Fong
tien.fong.chee at intel.com
Tue Sep 5 09:23:05 UTC 2017
On Sel, 2017-09-05 at 11:04 +0200, Marek Vasut wrote:
> On 09/05/2017 07:53 AM, Chee, Tien Fong wrote:
> >
> > On Isn, 2017-09-04 at 11:39 +0200, Marek Vasut wrote:
> > >
> > > On 09/04/2017 09:08 AM, Chee, Tien Fong wrote:
> > > >
> > > >
> > > > On Rab, 2017-08-30 at 10:52 +0200, Marek Vasut wrote:
> > > > >
> > > > >
> > > > > On 08/30/2017 10:05 AM, Chee, Tien Fong wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Sel, 2017-08-29 at 13:55 +0200, Marek Vasut wrote:
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 08/29/2017 12:45 PM, tien.fong.chee at intel.com wrote:
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > > > > >
> > > > > > > > This driver handles FPGA program operation from flash
> > > > > > > > loading
> > > > > > > > RBF to memory and then to program FPGA.
> > > > > > > >
> > > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com
> > > > > > > > >
> > > > > > > > ---
> > > > > > > > .../include/mach/fpga_manager_arria10.h |
> > > > > > > > 27
> > > > > > > > ++
> > > > > > > > drivers/fpga/socfpga_arria10.c |
> > > > > > > > 386
> > > > > > > > +++++++++++++++++++-
> > > > > > > > include/altera.h |
> > > > > > > > 6
> > > > > > > > +
> > > > > > > > include/configs/socfpga_common.h |
> > > > > > > > 4
> > > > > > > > +
> > > > > > > > 4 files changed, 422 insertions(+), 1 deletions(-)
> > > > > > > >
> > > > > > > > diff --git a/arch/arm/mach-
> > > > > > > > socfpga/include/mach/fpga_manager_arria10.h
> > > > > > > > b/arch/arm/mach-
> > > > > > > > socfpga/include/mach/fpga_manager_arria10.h
> > > > > > > > index 9cbf696..93a9122 100644
> > > > > > > > --- a/arch/arm/mach-
> > > > > > > > socfpga/include/mach/fpga_manager_arria10.h
> > > > > > > > +++ b/arch/arm/mach-
> > > > > > > > socfpga/include/mach/fpga_manager_arria10.h
> > > > > > > > @@ -8,6 +8,8 @@
> > > > > > > > #ifndef _FPGA_MANAGER_ARRIA10_H_
> > > > > > > > #define _FPGA_MANAGER_ARRIA10_H_
> > > > > > > >
> > > > > > > > +#include <asm/cache.h>
> > > > > > > > +
> > > > > > > > #define ALT_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR_SET_MSK
> > > > > > > >
> > > > > > > > BIT(0)
> > > > > > > > #define
> > > > > > > > ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK
> > > > > > > >
> > > > > > > > BIT(1)
> > > > > > > > #define ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK
> > > > > > > >
> > > > > > > > BIT(2)
> > > > > > > > @@ -89,11 +91,36 @@ struct socfpga_fpga_manager {
> > > > > > > > u32 imgcfg_fifo_status;
> > > > > > > > };
> > > > > > > >
> > > > > > > > +#if defined(CONFIG_CMD_FPGA_LOADFS)
> > > > > > > > +enum rbf_type {unknown, periph_section, core_section};
> > > > > > > > +enum rbf_security {invalid, unencrypted, encrypted};
> > > > > > > > +
> > > > > > > > +struct rbf_info {
> > > > > > > > + enum rbf_type section;
> > > > > > > > + enum rbf_security security;
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct flash_info {
> > > > > > > > + char *interface;
> > > > > > > > + char *dev_part;
> > > > > > > > + char *filename;
> > > > > > > > + int fstype;
> > > > > > > > + u32 remaining;
> > > > > > > > + u32 flash_offset;
> > > > > > > > + struct rbf_info rbfinfo;
> > > > > > > > + struct image_header header;
> > > > > > > > +};
> > > > > > > > +#endif
> > > > > > > > +
> > > > > > > > /* Functions */
> > > > > > > > int fpgamgr_program_init(u32 * rbf_data, size_t
> > > > > > > > rbf_size);
> > > > > > > > int fpgamgr_program_finish(void);
> > > > > > > > int is_fpgamgr_user_mode(void);
> > > > > > > > int fpgamgr_wait_early_user_mode(void);
> > > > > > > > +#if defined(CONFIG_CMD_FPGA_LOADFS)
> > > > > > > > +const char *get_cff_filename(const void *fdt, int
> > > > > > > > *len,
> > > > > > > > u32
> > > > > > > > core);
> > > > > > > > +const char *get_cff_devpart(const void *fdt, int
> > > > > > > > *len);
> > > > > > > > +#endif
> > > > > > > >
> > > > > > > > #endif /* __ASSEMBLY__ */
> > > > > > > >
> > > > > > > > diff --git a/drivers/fpga/socfpga_arria10.c
> > > > > > > > b/drivers/fpga/socfpga_arria10.c
> > > > > > > > index 5c1a68a..90c55e5 100644
> > > > > > > > --- a/drivers/fpga/socfpga_arria10.c
> > > > > > > > +++ b/drivers/fpga/socfpga_arria10.c
> > > > > > > > @@ -13,6 +13,12 @@
> > > > > > > > #include <altera.h>
> > > > > > > > #include <common.h>
> > > > > > > > #include <errno.h>
> > > > > > > > +#include <fat.h>
> > > > > > > > +#include <fs.h>
> > > > > > > > +#include <fdtdec.h>
> > > > > > > > +#include <malloc.h>
> > > > > > > > +#include <part.h>
> > > > > > > > +#include <spl.h>
> > > > > > > > #include <wait_bit.h>
> > > > > > > > #include <watchdog.h>
> > > > > > > >
> > > > > > > > @@ -22,6 +28,10 @@
> > > > > > > > #define COMPRESSION_OFFSET 229
> > > > > > > > #define FPGA_TIMEOUT_MSEC 1000 /* timeout in
> > > > > > > > ms */
> > > > > > > > #define FPGA_TIMEOUT_CNT 0x1000000
> > > > > > > > +#define RBF_UNENCRYPTED 0xa65c
> > > > > > > > +#define RBF_ENCRYPTED 0xa65d
> > > > > > > > +#define ARRIA10RBF_PERIPH 0x0001
> > > > > > > > +#define ARRIA10RBF_CORE 0x8001
> > > > > > > >
> > > > > > > > DECLARE_GLOBAL_DATA_PTR;
> > > > > > > >
> > > > > > > > @@ -118,7 +128,7 @@ static int
> > > > > > > > wait_for_nconfig_pin_and_nstatus_pin(void)
> > > > > > > > return wait_for_bit(__func__,
> > > > > > > > &fpga_manager_base-
> > > > > > > > >
> > > > > > > > > imgcfg_stat,
> > > > > > > > mask,
> > > > > > > > - false, FPGA_TIMEOUT_MSEC,
> > > > > > > > false);
> > > > > > > > + true, FPGA_TIMEOUT_MSEC,
> > > > > > > > false);
> > > > > > > > }
> > > > > > > >
> > > > > > > > static int wait_for_f2s_nstatus_pin(unsigned long
> > > > > > > > value)
> > > > > > > > @@ -453,6 +463,281 @@ int fpgamgr_program_finish(void)
> > > > > > > > return 0;
> > > > > > > > }
> > > > > > > >
> > > > > > > > +#if defined(CONFIG_CMD_FPGA_LOADFS)
> > > > > > > > +const char *get_cff_filename(const void *fdt, int
> > > > > > > > *len,
> > > > > > > > u32
> > > > > > > > core)
> > > > > > > > +{
> > > > > > > > + const char *cff_filename = NULL;
> > > > > > > > + const char *cell;
> > > > > > > > + int nodeoffset;
> > > > > > > > + nodeoffset = fdt_subnode_offset(fdt, 0,
> > > > > > > > "chosen");
> > > > > > > > +
> > > > > > > > + if (nodeoffset >= 0) {
> > > > > > > > + if (core)
> > > > > > > > + cell = fdt_getprop(fdt,
> > > > > > > > + nodeoffset,
> > > > > > > > + "cffcore-
> > > > > > > > file",
> > > > > > > > + len);
> > > > > > > > + else
> > > > > > > > + cell = fdt_getprop(fdt,
> > > > > > > > nodeoffset,
> > > > > > > > "cff-
> > > > > > > > file", len);
> > > > > > > This should be a property of the FPGA , not the system .
> > > > > > > You
> > > > > > > can
> > > > > > > have
> > > > > > > multiple FPGAs and then this would become a problem.
> > > > > > >
> > > > > > This setting is for the only one FPGA inside our SoCFPGA.
> > > > > You just said it yourself, it is for the only FPGA in your
> > > > > SOCFPGA ,
> > > > > thus it is a property of the FPGA , not a chosen .
> > > > >
> > > > Okay, what i trying to tell is that there is no multiple FPGAs
> > > > in
> > > > our
> > > > SOCFPGA. The filename is not any hardware properties, it is
> > > > just a
> > > > info
> > > > to tell SPL and U-boot which file to look for programming FPGA.
> > > What would happen if you attached an FPGA over ie. SPI or PCIe ?
> > > Then you have two FPGAs in the system and you need to describe
> > > them
> > > in
> > > the DT and your "chosen" approach breaks down.
> > >
> > We only need to decribe the internal FPGA of SoCFPGA in DT
> This is incorrect. You describe the hardware in DT, if you have
> multiple
> FPGAs, then your approach breaks down.
>
Let me clarify, we don't have FPGA HW properties described in DT, only
the RBF files are defined under chosen node. The files are defined only
apply for FPGA inside SOCFPGA.
Multiple external FPGA are configured through U-boot.
> >
> > such as
> > "chosen" to specify which file should SPL looking for getting SDRAM
> > up
> > with programming correct periph rbf into FPGA. When the SDRAM is up
> > running, then only SPL can load U-boot and booting from there.
> > The rest of external multiple FPGAs can be configured through U-
> > boot,
> > such as boot script, interactive in console or from PC host. Other
> > than
> > that, external FPGA can also be configured through Linux.
> > >
> > > >
> > > >
> > > > According to chosen node document, chosen node doesn't
> > > > represent a
> > > > real
> > > > HW, but serves as place for passing data. This is why our BSP
> > > > tool
> > > > put
> > > > the filename info here, the file is named by user in our tool,
> > > > and
> > > > this
> > > > info would be consumed by SPL to program FPGA.
> > > > What do you think?
> > > Your BSP tool is broken.
> > >
> > The BSP tool is used to describe internal FPGA in SOCFPGA. Other
> > external FPGAs other than SOCFPGA itself, it can be programmed
> > through
> > U-boot.
> The BSP tool is broken if it generates broken DT, do I have to repeat
> myself ?
>
BSP tool is only generate the RBF filename for FPGA inside SOCFPGA.
Multiple external FPGA are configured through U-boot.
> [...]
>
More information about the U-Boot
mailing list