[U-Boot] ZynqMP qspi

[Liam Beguin]

Hi,

On 26/09/17 01:28 AM, Siva Durga Prasad Paladugu wrote:
> Hi,
> 
>> -----Original Message-----
>> From: Jagan Teki [mailto:jagannadh.teki at gmail.com]
>> Sent: Tuesday, September 26, 2017 10:17 AM
>> To: Liam Beguin <liambeguin at gmail.com>
>> Cc: u-boot at lists.denx.de; Michal Simek <michals at xilinx.com>; Siva Durga
>> Prasad Paladugu <sivadur at xilinx.com>
>> Subject: Re: [U-Boot] ZynqMP qspi
>>
>> On Tue, Sep 26, 2017 at 9:07 AM, Liam Beguin <liambeguin at gmail.com>
>> wrote:
>>>
>>> Resending with proper CC since the email came back.
>>>
>>> On 24/09/17 09:36 PM, Liam Beguin wrote:
>>>> Hi,
>>>>
>>>> I'm testing a new Xilinx zynqmp dev board and was not able to probe
>>>> the qspi with the latest mainline U-Boot. I see that there is a
>> 'zynqmp_qspi'
>>>> driver in the Xilinx tree [1] but nothing in mainline. After a little
>>>> digging, I found a thread on the list [2] (and [3]) and was wondering
>>>> in what state this was now.
> 
> I am planning to send the new series in 1-2 weeks, probably you can wait till then or
> you can try with the patch[2] and see if you are able to get it working with those( those
> are known to be working when I sent ). Also, please note that as of now iam  targeting
> only for qspi single mode not the dual modes.
> 

Great, I'll wait for your series and test it as soon as it comes out.

Thanks,
Liam

> Thanks,
> Siva
> 
>>>>
>>>> [1]
>>>> https://github.com/Xilinx/u-boot-
>> xlnx/blob/master/drivers/spi/zynqmp_
>>>> qspi.c [2]
>>>> https://lists.denx.de/pipermail/u-boot/2016-July/261003.html
>>>> [3] https://lists.denx.de/pipermail/u-boot/2016-
>> November/273650.html
>>
>> I think, Siva is working on it. and he would be best to comment this.
>>
>> thanks!
>> --
>> Jagan Teki
>> Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream
>> Maintainer Hyderabad, India.