[U-Boot] [PATCH v2 2/8] printk: collect printk stuff into <linux/printk.h> with loglevel support
Masahiro Yamada
yamada.masahiro at socionext.com
Sat Sep 16 05:10:40 UTC 2017
When we import code from Linux, with regular re-sync planned, we want
to use printk() and pr_*(). U-Boot does not support them in a clean
way. So, people end up with local macros, or compat headers here and
there, then we occasionally see build errors of definition conflicts.
We have include/linux/compat.h, but putting all sorts of unrelated
things into a single header is just a temporal workaround. Hence this
patch, to find the best home for all printk variants. If you want to
use printk() and friends, please include <linux/printk.h>. This header
is self-contained, and pulls in only a few headers.
When I was testing this clean-up, I noticed the image size exceeded
its platform limit on some boards. This is because all pr_*() that
were previously defined as no-op in include/linux/mtd/mtd.h (unless
CONFIG_MTD_DEBUG is set), are now enabled.
To make such boards happy, this commit also implements CONFIG_LOGLEVEL.
The concept is similar to the kernel parameter "loglevel". (Actually,
the Kconfig help message was taken from kernel-paremeter.txt of Linux)
Messages with a loglevel smaller than console loglevel will be printed.
The difference is the loglevel is build-time determined. To save the
image size, lower priority pr_*() are compiled out. I set the default
of CONFIG_LOGLEVEL to 6, i.e. pr_notice and higher priority messages
are compiled in.
I adjusted CONFIG_LOGLEVEL to avoid build error for some boards.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
Changes in v2:
- Add CONFIG_LOGLEVEL to adjust image size for some boards
arch/arm/mach-uniphier/dram_init.c | 3 -
arch/arm/mach-uniphier/init.h | 5 --
common/Kconfig | 17 ++++++
configs/axm_defconfig | 1 +
configs/colibri_vf_defconfig | 1 +
configs/corvus_defconfig | 1 +
configs/omapl138_lcdk_defconfig | 1 +
configs/openrd_base_defconfig | 1 +
configs/openrd_client_defconfig | 1 +
configs/openrd_ultimate_defconfig | 1 +
configs/taurus_defconfig | 1 +
configs/vf610twr_defconfig | 1 +
configs/vf610twr_nand_defconfig | 1 +
drivers/bios_emulator/include/x86emu/x86emui.h | 3 -
drivers/usb/dwc3/linux-compat.h | 1 -
drivers/usb/musb-new/linux-compat.h | 2 -
include/common.h | 6 +-
include/linux/compat.h | 11 ----
include/linux/mtd/mtd.h | 10 +---
include/linux/printk.h | 79 ++++++++++++++++++++++++++
20 files changed, 108 insertions(+), 39 deletions(-)
create mode 100644 include/linux/printk.h
diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c
index 32d359321ae2..22136855fa1a 100644
--- a/arch/arm/mach-uniphier/dram_init.c
+++ b/arch/arm/mach-uniphier/dram_init.c
@@ -15,9 +15,6 @@
#include "sg-regs.h"
#include "soc-info.h"
-#define pr_warn(fmt, args...) printf(fmt, ##args)
-#define pr_err(fmt, args...) printf(fmt, ##args)
-
DECLARE_GLOBAL_DATA_PTR;
struct uniphier_memif_data {
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 29f638d94703..da209354ed50 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -104,9 +104,4 @@ int uniphier_have_internal_stm(void);
int uniphier_boot_from_backend(void);
int uniphier_pin_init(const char *pinconfig_name);
-#undef pr_warn
-#define pr_warn(fmt, args...) printf(fmt, ##args)
-#undef pr_err
-#define pr_err(fmt, args...) printf(fmt, ##args)
-
#endif /* __MACH_INIT_H */
diff --git a/common/Kconfig b/common/Kconfig
index 4d8cae96109a..79fe781ba59f 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -243,6 +243,23 @@ config IDENT_STRING
help
This options adds the board specific name to u-boot version.
+config LOGLEVEL
+ int "loglevel"
+ default 6
+ range 0 8
+ help
+ All Messages with a loglevel smaller than the console loglevel will
+ be compiled in. The loglevels are defined as follows:
+
+ 0 (KERN_EMERG) system is unusable
+ 1 (KERN_ALERT) action must be taken immediately
+ 2 (KERN_CRIT) critical conditions
+ 3 (KERN_ERR) error conditions
+ 4 (KERN_WARNING) warning conditions
+ 5 (KERN_NOTICE) normal but significant condition
+ 6 (KERN_INFO) informational
+ 7 (KERN_DEBUG) debug-level messages
+
config SILENT_CONSOLE
bool "Support a silent console"
help
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index 81654b230431..cd89c2a235ff 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -41,3 +41,4 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
CONFIG_USE_TINY_PRINTF=y
+CONFIG_LOGLEVEL=4
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 1ffe86180974..49315d0638ed 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -6,6 +6,7 @@ CONFIG_TARGET_COLIBRI_VF=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,IMX_NAND"
CONFIG_BOOTDELAY=1
+CONFIG_LOGLEVEL=3
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 705e00145700..059cb5992e92 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -14,6 +14,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
+CONFIG_LOGLEVEL=4
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index c95134bcf990..3e9eb4fa84e2 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=4
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig
index b2a0e04d36ce..f31af1c3fe75 100644
--- a/configs/openrd_base_defconfig
+++ b/configs/openrd_base_defconfig
@@ -5,6 +5,7 @@ CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Base"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE"
CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=3
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig
index 8b1d35edd10f..bee818b82cc1 100644
--- a/configs/openrd_client_defconfig
+++ b/configs/openrd_client_defconfig
@@ -5,6 +5,7 @@ CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Client"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT"
CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=3
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig
index 4cc0205629f6..e9462e59b2f1 100644
--- a/configs/openrd_ultimate_defconfig
+++ b/configs/openrd_ultimate_defconfig
@@ -5,6 +5,7 @@ CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE"
CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=3
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 71a382a3e132..5b7fc8ae1466 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=4
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index 948ea73edb91..3c277be6828f 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_VF610=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
index 10cdf0646c98..1cd22b1b8b31 100644
--- a/configs/vf610twr_nand_defconfig
+++ b/configs/vf610twr_nand_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_VF610=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
diff --git a/drivers/bios_emulator/include/x86emu/x86emui.h b/drivers/bios_emulator/include/x86emu/x86emui.h
index a74957d992aa..3537255539fe 100644
--- a/drivers/bios_emulator/include/x86emu/x86emui.h
+++ b/drivers/bios_emulator/include/x86emu/x86emui.h
@@ -72,9 +72,6 @@
#include <string.h>
#endif
-#define printk printf
-
-
/*--------------------------- Inline Functions ----------------------------*/
#ifdef __cplusplus
diff --git a/drivers/usb/dwc3/linux-compat.h b/drivers/usb/dwc3/linux-compat.h
index 9e944a31be11..64db4ecc3c6f 100644
--- a/drivers/usb/dwc3/linux-compat.h
+++ b/drivers/usb/dwc3/linux-compat.h
@@ -12,7 +12,6 @@
#ifndef __DWC3_LINUX_COMPAT__
#define __DWC3_LINUX_COMPAT__
-#define pr_debug(format) debug(format)
#define WARN(val, format, arg...) debug(format, ##arg)
#define dev_WARN(dev, format, arg...) debug(format, ##arg)
#define WARN_ON_ONCE(val) debug("Error %d\n", val)
diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h
index 4dae83ed6850..7bb53d2b198e 100644
--- a/drivers/usb/musb-new/linux-compat.h
+++ b/drivers/usb/musb-new/linux-compat.h
@@ -5,8 +5,6 @@
#include <linux/list.h>
#include <linux/compat.h>
-#define pr_debug(fmt, args...) debug(fmt, ##args)
-
#define WARN(condition, fmt, args...) ({ \
int ret_warn = !!condition; \
if (ret_warn) \
diff --git a/include/common.h b/include/common.h
index 5e841947c17f..4eb92298a207 100644
--- a/include/common.h
+++ b/include/common.h
@@ -25,6 +25,7 @@ typedef volatile unsigned char vu_char;
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/types.h>
+#include <linux/printk.h>
#include <linux/string.h>
#include <linux/stringify.h>
#include <asm/ptrace.h>
@@ -55,11 +56,6 @@ typedef volatile unsigned char vu_char;
#define _SPL_BUILD 0
#endif
-/* Define this at the top of a file to add a prefix to debug messages */
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 2336b56cf5c1..bc027adcb936 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -25,17 +25,6 @@ extern struct p_current *current;
printf(fmt, ##args)
#define dev_warn(dev, fmt, args...) \
printf(fmt, ##args)
-#define printk printf
-#define printk_once printf
-
-#define KERN_EMERG
-#define KERN_ALERT
-#define KERN_CRIT
-#define KERN_ERR
-#define KERN_WARNING
-#define KERN_NOTICE
-#define KERN_INFO
-#define KERN_DEBUG
#define GFP_ATOMIC ((gfp_t) 0)
#define GFP_KERNEL ((gfp_t) 0)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 1fd17c303a8d..3e1694b3a5d3 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -452,28 +452,20 @@ static inline void mtd_erase_callback(struct erase_info *instr)
#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
#ifdef CONFIG_MTD_DEBUG
-#define pr_debug(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
#define MTDDEBUG(n, args...) \
do { \
if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
printk(KERN_INFO args); \
} while(0)
#else /* CONFIG_MTD_DEBUG */
-#define pr_debug(args...)
#define MTDDEBUG(n, args...) \
do { \
if (0) \
printk(KERN_INFO args); \
} while(0)
#endif /* CONFIG_MTD_DEBUG */
-#define pr_info(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
-#define pr_warn(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
-#define pr_err(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
-#define pr_crit(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
-#define pr_cont(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
-#define pr_notice(args...) MTDDEBUG(MTD_DEBUG_LEVEL0, args)
#endif
-
+
static inline int mtd_is_bitflip(int err) {
return err == -EUCLEAN;
}
diff --git a/include/linux/printk.h b/include/linux/printk.h
new file mode 100644
index 000000000000..088513ad29bb
--- /dev/null
+++ b/include/linux/printk.h
@@ -0,0 +1,79 @@
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+#include <stdio.h>
+#include <linux/compiler.h>
+
+#define KERN_EMERG
+#define KERN_ALERT
+#define KERN_CRIT
+#define KERN_ERR
+#define KERN_WARNING
+#define KERN_NOTICE
+#define KERN_INFO
+#define KERN_DEBUG
+#define KERN_CONT
+
+#define printk(fmt, ...) \
+ printf(fmt, ##__VA_ARGS__)
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format checking.
+ */
+#define no_printk(fmt, ...) \
+({ \
+ if (0) \
+ printk(fmt, ##__VA_ARGS__); \
+ 0; \
+})
+
+#define __printk(level, fmt, ...) \
+({ \
+ level < CONFIG_LOGLEVEL ? printk(fmt, ##__VA_ARGS__) : 0; \
+})
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+ __printk(0, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+ __printk(1, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+ __printk(2, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+ __printk(3, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+ __printk(4, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+ __printk(5, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+ __printk(6, pr_fmt(fmt), ##__VA_ARGS__)
+
+#define pr_cont(fmt, ...) \
+ printk(fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ __printk(7, pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ no_printk(pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+#ifdef DEBUG
+#define pr_debug(fmt, ...) \
+ __printk(7, pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+ no_printk(pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+#define printk_once(fmt, ...) \
+ printk(fmt, ##__VA_ARGS__)
+
+#endif
--
2.7.4
More information about the U-Boot
mailing list