[U-Boot] [PATCH v2 07/14] usb: gadget: usb_ether: Move settings to common
Maxime Ripard
maxime.ripard at free-electrons.com
Tue Sep 12 19:01:35 UTC 2017
The usb_ether gadget duplicates the USB settings for the manufacturer,
product ID and vendor ID.
Make sure we use the common option so that we can expect a single VID/PID
couple for a single device.
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Lukasz Majewski <lukma at denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
configs/sama5d2_ptc_nandflash_defconfig | 1 +
configs/sama5d2_ptc_spiflash_defconfig | 1 +
configs/vinco_defconfig | 1 +
drivers/usb/gadget/Kconfig | 2 ++
drivers/usb/gadget/ether.c | 16 ++++++++--------
include/configs/ma5d4evk.h | 1 -
include/configs/sama5d2_ptc.h | 1 -
include/configs/vinco.h | 1 -
scripts/config_whitelist.txt | 1 -
9 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/configs/sama5d2_ptc_nandflash_defconfig b/configs/sama5d2_ptc_nandflash_defconfig
index 6672a5ce11f7..431056a50a8b 100644
--- a/configs/sama5d2_ptc_nandflash_defconfig
+++ b/configs/sama5d2_ptc_nandflash_defconfig
@@ -29,5 +29,6 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Atmel SAMA5D2_PTC"
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ETHER=y
diff --git a/configs/sama5d2_ptc_spiflash_defconfig b/configs/sama5d2_ptc_spiflash_defconfig
index 9a23a808f1b3..66bb671820a6 100644
--- a/configs/sama5d2_ptc_spiflash_defconfig
+++ b/configs/sama5d2_ptc_spiflash_defconfig
@@ -30,5 +30,6 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Atmel SAMA5D2_PTC"
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ETHER=y
diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig
index 08aa8c52a254..57ca8f949077 100644
--- a/configs/vinco_defconfig
+++ b/configs/vinco_defconfig
@@ -31,6 +31,7 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="L+G VInCo"
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ETHER=y
CONFIG_USB_HOST_ETHER=y
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7bbfde26d0be..ef13bd2edb66 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -44,12 +44,14 @@ config USB_GADGET_MANUFACTURER
config USB_GADGET_VENDOR_NUM
hex "Vendor ID of the USB device"
+ help
Vendor ID of the USB device emulated, reported to the host device.
This is usually the board or SoC vendor's, unless you've registered
for one.
config USB_GADGET_PRODUCT_NUM
hex "Product ID of the USB device"
+ help
Product ID of the USB device emulated, reported to the host device.
config USB_GADGET_ATMEL_USBA
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 2cf5c8d31e25..dbb578258f96 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -273,8 +273,8 @@ static inline int BITRATE(struct usb_gadget *g)
* static ushort idProduct;
*/
-#if defined(CONFIG_USBNET_MANUFACTURER)
-static char *iManufacturer = CONFIG_USBNET_MANUFACTURER;
+#if defined(CONFIG_USB_GADGET_MANUFACTURER)
+static char *iManufacturer = CONFIG_USB_GADGET_MANUFACTURER;
#else
static char *iManufacturer = "U-Boot";
#endif
@@ -2073,11 +2073,11 @@ static int eth_bind(struct usb_gadget *gadget)
* to choose the right configuration otherwise.
*/
if (rndis) {
-#if defined(CONFIG_USB_RNDIS_VENDOR_ID) && defined(CONFIG_USB_RNDIS_PRODUCT_ID)
+#if defined(CONFIG_USB_GADGET_VENDOR_NUM) && defined(CONFIG_USB_GADGET_PRODUCT_NUM)
device_desc.idVendor =
- __constant_cpu_to_le16(CONFIG_USB_RNDIS_VENDOR_ID);
+ __constant_cpu_to_le16(CONFIG_USB_GADGET_VENDOR_NUM);
device_desc.idProduct =
- __constant_cpu_to_le16(CONFIG_USB_RNDIS_PRODUCT_ID);
+ __constant_cpu_to_le16(CONFIG_USB_GADGET_PRODUCT_NUM);
#else
device_desc.idVendor =
__constant_cpu_to_le16(RNDIS_VENDOR_NUM);
@@ -2092,9 +2092,9 @@ static int eth_bind(struct usb_gadget *gadget)
* supporting one submode of the "SAFE" variant of MDLM.)
*/
} else {
-#if defined(CONFIG_USB_CDC_VENDOR_ID) && defined(CONFIG_USB_CDC_PRODUCT_ID)
- device_desc.idVendor = cpu_to_le16(CONFIG_USB_CDC_VENDOR_ID);
- device_desc.idProduct = cpu_to_le16(CONFIG_USB_CDC_PRODUCT_ID);
+#if defined(CONFIG_USB_GADGET_VENDOR_NUM) && defined(CONFIG_USB_GADGET_PRODUCT_NUM)
+ device_desc.idVendor = cpu_to_le16(CONFIG_USB_GADGET_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(CONFIG_USB_GADGET_PRODUCT_NUM);
#else
if (!cdc) {
device_desc.idVendor =
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
index 6d25d84c6eb6..3aeb7e6ef136 100644
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -97,7 +97,6 @@
#ifdef CONFIG_CMD_USB
/* USB device */
-#define CONFIG_USBNET_MANUFACTURER "AriesEmbedded"
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT 300
diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h
index 543592e3a574..2328c7614ed7 100644
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -60,7 +60,6 @@
#endif
/* USB device */
-#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2_PTC"
/* Ethernet Hardware */
#define CONFIG_MACB
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index f5aaaa2ffe91..0a23b93f669e 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -64,7 +64,6 @@
#endif
/* USB device */
-#define CONFIG_USBNET_MANUFACTURER "L+G VInCo"
/* Ethernet Hardware */
#define CONFIG_PHY_SMSC
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index bbc3d4351bbd..5cb6ce6612d1 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4983,7 +4983,6 @@ CONFIG_USBD_SERIAL_OUT_PKTSIZE
CONFIG_USBD_VENDORID
CONFIG_USBID_ADDR
CONFIG_USBNET_DEV_ADDR
-CONFIG_USBNET_MANUFACTURER
CONFIG_USBTTY
CONFIG_USB_AM35X
CONFIG_USB_ATMEL
--
git-series 0.9.1
More information about the U-Boot
mailing list