[U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10

[Marek Vasut]

On 09/26/2017 10:20 AM, Chee, Tien Fong wrote:
> On Isn, 2017-09-25 at 11:19 +0200, Marek Vasut wrote:
>> On 09/25/2017 10:40 AM, tien.fong.chee at intel.com wrote:
>>>
>>> From: Tien Fong Chee <tien.fong.chee at intel.com>
>>>
>>> Add DDR driver suppport for Arria 10.
>>>
>>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
>>> ---
>>>  arch/arm/mach-socfpga/include/mach/sdram.h         |   2 +
>>>  arch/arm/mach-socfpga/include/mach/sdram_arria10.h | 103 ++-
>>>  drivers/ddr/altera/sdram_arria10.c                 | 735
>>> +++++++++++++++++++++
>>>  3 files changed, 839 insertions(+), 1 deletion(-)
>>>  create mode 100644 drivers/ddr/altera/sdram_arria10.c
>>>
>>> diff --git a/arch/arm/mach-socfpga/include/mach/sdram.h
>>> b/arch/arm/mach-socfpga/include/mach/sdram.h
>>> index 4a9754e..b833fc2 100644
>>> --- a/arch/arm/mach-socfpga/include/mach/sdram.h
>>> +++ b/arch/arm/mach-socfpga/include/mach/sdram.h
>>> @@ -10,6 +10,8 @@
>>>  
>>>  #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>>>  #include <asm/arch/sdram_gen5.h>
>>> +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
>>> +#include <asm/arch/sdram_arria10.h>
>>>  #endif
>>>  
>>>  #endif
>>> diff --git a/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
>>> b/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
>>> index 1d7b7c1..7af9431 100644
>>> --- a/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
>>> +++ b/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
>>> @@ -1,5 +1,5 @@
>>>  /*
>>> - * Copyright (C) 2015-2017 Intel Corporation <www.intel.com>
>>> + * Copyright (C) 2017 Intel Corporation <www.intel.com>
>>>   *
>>>   * SPDX-License-Identifier:	GPL-2.0
>>>   */
>>> @@ -8,6 +8,7 @@
>>>  #define _SOCFPGA_SDRAM_ARRIA10_H_
>>>  
>>>  #ifndef __ASSEMBLY__
>>> +int ddr_calibration_sequence(void);
>>>  
>>>  struct socfpga_ecc_hmc {
>>>  	u32 ip_rev_id;
>>> @@ -204,6 +205,106 @@ struct socfpga_io48_mmr {
>>>  	u32 niosreserve1;
>>>  	u32 niosreserve2;
>>>  };
>>> +
>>> +union dramaddrw_reg {
>>> +	struct {
>>> +		u32 cfg_col_addr_width:5;
>>> +		u32 cfg_row_addr_width:5;
>>> +		u32 cfg_bank_addr_width:4;
>>> +		u32 cfg_bank_group_addr_width:2;
>>> +		u32 cfg_cs_addr_width:3;
>>> +		u32 reserved:13;
>>> +	};
>> Use regular macros for bitfields, not this crap.
>>
> Why regular macros is prefered? Above implementation improve
> readability, simplify the implementation and saving memory.

Because that's how U-Boot does it (and the above afair breaks on
different endianness).

>>>
>>> +	u32 word;
>>> +};
>>> +
>>> +union ctrlcfg0_reg {
>>> +	struct {
>>> +		u32 cfg_mem_type:4;
>>> +		u32 cfg_dimm_type:3;
>>> +		u32 cfg_ac_pos:2;
>>> +		u32 cfg_ctrl_burst_len:5;
>>> +		u32 reserved:18;  /* Other fields unused */
>>> +	};
>>> +	u32 word;
>>> +};
>> [...]

[...]

-- 
Best regards,
Marek Vasut