[U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Marek Vasut
marex at denx.de
Mon Sep 25 09:01:03 UTC 2017
On 09/25/2017 10:39 AM, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee at intel.com>
>
> This patch adds description on properties about location of FPGA RBFs are
> stored, type and functionality of RBF used to configure FPGA.
>
> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> ---
> doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
> index 2fd8e7a..7abb746 100644
> --- a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
> +++ b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
> @@ -7,6 +7,14 @@ Required properties:
> - The second index is for writing FPGA configuration data.
> - resets : Phandle and reset specifier for the device's reset.
> - clocks : Clocks used by the device.
> +- bitstream_periph : FPGA peripheral raw binary file which is used to
> + initialize FPGA IOs, PLL, IO48 and DDR.
> +- bitstream_core : FPGA core raw binary file contains FPGA design which is used
> + to program FPGA CRAM and ERAM.
> +- bitstream_devpart : Partition of flash device where bitstream files are
> + stored.
> + <dev[:part]> - dev is flash device number, part is flash
> + device partition.
>
> Example:
>
> @@ -16,4 +24,7 @@ Example:
> 0xffcfe400 0x20>;
> clocks = <&l4_mp_clk>;
> resets = <&rst FPGAMGR_RESET>;
> + bitstream_periph = "ghrd_10as066n2.periph.rbf.mkimage";
> + bitstream_core = "ghrd_10as066n2.core.rbf.mkimage";
> + bitstream_devpart = "0:1";
These should probably be altr,something-something ... they are
definitely not generic bindings
> };
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list