[U-Boot] [RESEND PATCH 4/5] sunxi: video: split out PLL code
Vasily Khoruzhick
anarsoul at gmail.com
Tue Sep 19 05:04:20 UTC 2017
It will be reused in new DM LCD driver.
Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
arch/arm/include/asm/arch-sunxi/lcdc.h | 2 +
drivers/video/sunxi/lcdc.c | 117 ++++++++++++++++++++++++++++++-
drivers/video/sunxi/sunxi_display.c | 121 ++-------------------------------
3 files changed, 124 insertions(+), 116 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/lcdc.h b/arch/arm/include/asm/arch-sunxi/lcdc.h
index a751698b4f..5d9253aaa5 100644
--- a/arch/arm/include/asm/arch-sunxi/lcdc.h
+++ b/arch/arm/include/asm/arch-sunxi/lcdc.h
@@ -124,5 +124,7 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc,
void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc,
const struct display_timing *mode,
bool ext_hvsync, bool is_composite);
+void lcdc_pll_set(struct sunxi_ccm_reg * const ccm, int tcon,
+ int dotclock, int *clk_div, int *clk_double);
#endif /* _LCDC_H */
diff --git a/drivers/video/sunxi/lcdc.c b/drivers/video/sunxi/lcdc.c
index 7d215b713e..023a30cb1e 100644
--- a/drivers/video/sunxi/lcdc.c
+++ b/drivers/video/sunxi/lcdc.c
@@ -10,6 +10,7 @@
#include <common.h>
+#include <asm/arch/clock.h>
#include <asm/arch/lcdc.h>
#include <asm/io.h>
@@ -100,7 +101,7 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc,
writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) |
SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v);
-#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
+#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_VIDEO_DE2)
writel(SUNXI_LCDC_X(mode->hsync_len.typ) |
SUNXI_LCDC_Y(mode->vsync_len.typ), &lcdc->tcon0_timing_sync);
@@ -207,3 +208,117 @@ void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc,
SUNXI_LCDC_MUX_CTRL_SRC0(1));
#endif
}
+
+void lcdc_pll_set(struct sunxi_ccm_reg *ccm, int tcon, int dotclock,
+ int *clk_div, int *clk_double)
+{
+ int value, n, m, min_m, max_m, diff;
+ int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
+ int best_double = 0;
+ bool use_mipi_pll = false;
+
+ if (tcon == 0) {
+#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_SUNXI_DE2)
+ min_m = 6;
+ max_m = 127;
+#endif
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+ min_m = max_m = 7;
+#endif
+ } else {
+ min_m = 1;
+ max_m = 15;
+ }
+
+ /*
+ * Find the lowest divider resulting in a matching clock, if there
+ * is no match, pick the closest lower clock, as monitors tend to
+ * not sync to higher frequencies.
+ */
+ for (m = min_m; m <= max_m; m++) {
+#ifndef CONFIG_SUNXI_DE2
+ n = (m * dotclock) / 3000;
+
+ if ((n >= 9) && (n <= 127)) {
+ value = (3000 * n) / m;
+ diff = dotclock - value;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n = n;
+ best_double = 0;
+ }
+ }
+
+ /* These are just duplicates */
+ if (!(m & 1))
+ continue;
+#endif
+
+ /* No double clock on DE2 */
+ n = (m * dotclock) / 6000;
+ if ((n >= 9) && (n <= 127)) {
+ value = (6000 * n) / m;
+ diff = dotclock - value;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n = n;
+ best_double = 1;
+ }
+ }
+ }
+
+#ifdef CONFIG_MACH_SUN6I
+ /*
+ * Use the MIPI pll if we've been unable to find any matching setting
+ * for PLL3, this happens with high dotclocks because of min_m = 6.
+ */
+ if (tcon == 0 && best_n == 0) {
+ use_mipi_pll = true;
+ best_m = 6; /* Minimum m for tcon0 */
+ }
+
+ if (use_mipi_pll) {
+ clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */
+ clock_set_mipi_pll(best_m * dotclock * 1000);
+ debug("dotclock: %dkHz = %dkHz via mipi pll\n",
+ dotclock, clock_get_mipi_pll() / best_m / 1000);
+ } else
+#endif
+ {
+ clock_set_pll3(best_n * 3000000);
+ debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n",
+ dotclock,
+ (best_double + 1) * clock_get_pll3() / best_m / 1000,
+ best_double + 1, best_n, best_m);
+ }
+
+ if (tcon == 0) {
+ u32 pll;
+
+ if (use_mipi_pll)
+ pll = CCM_LCD_CH0_CTRL_MIPI_PLL;
+ else if (best_double)
+ pll = CCM_LCD_CH0_CTRL_PLL3_2X;
+ else
+ pll = CCM_LCD_CH0_CTRL_PLL3;
+
+ writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll,
+ &ccm->lcd0_clk_cfg);
+ }
+#ifndef CONFIG_SUNXI_DE2
+ else {
+ writel(CCM_LCD_CH1_CTRL_GATE |
+ (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X :
+ CCM_LCD_CH1_CTRL_PLL3) |
+ CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg);
+ if (sunxi_is_composite())
+ setbits_le32(&ccm->lcd0_ch1_clk_cfg,
+ CCM_LCD_CH1_CTRL_HALF_SCLK1);
+ }
+#endif
+
+ *clk_div = best_m;
+ *clk_double = best_double;
+}
diff --git a/drivers/video/sunxi/sunxi_display.c b/drivers/video/sunxi/sunxi_display.c
index de768ba94a..f3db125305 100644
--- a/drivers/video/sunxi/sunxi_display.c
+++ b/drivers/video/sunxi/sunxi_display.c
@@ -515,119 +515,6 @@ static void sunxi_composer_enable(void)
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
}
-/*
- * LCDC, what allwinner calls a CRTC, so timing controller and serializer.
- */
-static void sunxi_lcdc_pll_set(int tcon, int dotclock,
- int *clk_div, int *clk_double)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- int value, n, m, min_m, max_m, diff;
- int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
- int best_double = 0;
- bool use_mipi_pll = false;
-
- if (tcon == 0) {
-#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
- min_m = 6;
- max_m = 127;
-#endif
-#ifdef CONFIG_VIDEO_LCD_IF_LVDS
- min_m = max_m = 7;
-#endif
- } else {
- min_m = 1;
- max_m = 15;
- }
-
- /*
- * Find the lowest divider resulting in a matching clock, if there
- * is no match, pick the closest lower clock, as monitors tend to
- * not sync to higher frequencies.
- */
- for (m = min_m; m <= max_m; m++) {
- n = (m * dotclock) / 3000;
-
- if ((n >= 9) && (n <= 127)) {
- value = (3000 * n) / m;
- diff = dotclock - value;
- if (diff < best_diff) {
- best_diff = diff;
- best_m = m;
- best_n = n;
- best_double = 0;
- }
- }
-
- /* These are just duplicates */
- if (!(m & 1))
- continue;
-
- n = (m * dotclock) / 6000;
- if ((n >= 9) && (n <= 127)) {
- value = (6000 * n) / m;
- diff = dotclock - value;
- if (diff < best_diff) {
- best_diff = diff;
- best_m = m;
- best_n = n;
- best_double = 1;
- }
- }
- }
-
-#ifdef CONFIG_MACH_SUN6I
- /*
- * Use the MIPI pll if we've been unable to find any matching setting
- * for PLL3, this happens with high dotclocks because of min_m = 6.
- */
- if (tcon == 0 && best_n == 0) {
- use_mipi_pll = true;
- best_m = 6; /* Minimum m for tcon0 */
- }
-
- if (use_mipi_pll) {
- clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */
- clock_set_mipi_pll(best_m * dotclock * 1000);
- debug("dotclock: %dkHz = %dkHz via mipi pll\n",
- dotclock, clock_get_mipi_pll() / best_m / 1000);
- } else
-#endif
- {
- clock_set_pll3(best_n * 3000000);
- debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n",
- dotclock,
- (best_double + 1) * clock_get_pll3() / best_m / 1000,
- best_double + 1, best_n, best_m);
- }
-
- if (tcon == 0) {
- u32 pll;
-
- if (use_mipi_pll)
- pll = CCM_LCD_CH0_CTRL_MIPI_PLL;
- else if (best_double)
- pll = CCM_LCD_CH0_CTRL_PLL3_2X;
- else
- pll = CCM_LCD_CH0_CTRL_PLL3;
-
- writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll,
- &ccm->lcd0_ch0_clk_cfg);
- } else {
- writel(CCM_LCD_CH1_CTRL_GATE |
- (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X :
- CCM_LCD_CH1_CTRL_PLL3) |
- CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg);
- if (sunxi_is_composite())
- setbits_le32(&ccm->lcd0_ch1_clk_cfg,
- CCM_LCD_CH1_CTRL_HALF_SCLK1);
- }
-
- *clk_div = best_m;
- *clk_double = best_double;
-}
-
static void sunxi_lcdc_init(void)
{
struct sunxi_ccm_reg * const ccm =
@@ -754,6 +641,8 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
{
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int clk_div, clk_double, pin;
struct display_timing timing;
@@ -773,7 +662,7 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
#endif
}
- sunxi_lcdc_pll_set(0, mode->pixclock_khz, &clk_div, &clk_double);
+ lcdc_pll_set(ccm, 0, mode->pixclock_khz, &clk_div, &clk_double);
sunxi_ctfb_mode_to_display_timing(mode, &timing);
lcdc_tcon0_mode_set(lcdc, &timing, clk_div, for_ext_vga_dac,
@@ -787,6 +676,8 @@ static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode,
{
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct display_timing timing;
sunxi_ctfb_mode_to_display_timing(mode, &timing);
@@ -798,7 +689,7 @@ static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode,
sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD_LCD0);
}
- sunxi_lcdc_pll_set(1, mode->pixclock_khz, clk_div, clk_double);
+ lcdc_pll_set(ccm, 1, mode->pixclock_khz, clk_div, clk_double);
}
#endif /* CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA || CONFIG_VIDEO_COMPOSITE */
--
2.14.1
More information about the U-Boot
mailing list