[U-Boot] [PATCH 056/080] cfi_flash: Rename camel-case variables

Mario Six mario.six at gdsys.cc
Fri Sep 29 12:52:14 UTC 2017


Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
 drivers/mtd/cfi_flash.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index b2857f372d..dff8b73055 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1686,8 +1686,8 @@ static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
 
 static void cmdset_amd_read_jedec_ids(flash_info_t *info)
 {
-	ushort bankId = 0;
-	uchar  manuId;
+	ushort bank_id = 0;
+	uchar  manu_id;
 	uchar  lsbits;
 
 	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
@@ -1695,14 +1695,14 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info)
 	flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
 	udelay(1000); /* some flash are slow to respond */
 
-	manuId = flash_read_uchar(info, FLASH_OFFSET_MANUFACTURER_ID);
+	manu_id = flash_read_uchar(info, FLASH_OFFSET_MANUFACTURER_ID);
 	/* JEDEC JEP106Z specifies ID codes up to bank 7 */
-	while (manuId == FLASH_CONTINUATION_CODE && bankId < 0x800) {
-		bankId += 0x100;
-		manuId = flash_read_uchar(info,
-			bankId | FLASH_OFFSET_MANUFACTURER_ID);
+	while (manu_id == FLASH_CONTINUATION_CODE && bank_id < 0x800) {
+		bank_id += 0x100;
+		manu_id = flash_read_uchar(info,
+			bank_id | FLASH_OFFSET_MANUFACTURER_ID);
 	}
-	info->manufacturer_id = manuId;
+	info->manufacturer_id = manu_id;
 
 	lsbits = flash_read_uchar(info, FLASH_OFFSET_LOWER_SW_BITS);
 	info->sr_supported = lsbits & BIT(0);
-- 
2.11.0



More information about the U-Boot mailing list