[U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine
Bin Meng
bmeng.cn at gmail.com
Wed Sep 20 05:02:00 UTC 2017
Hi Tuomas,
On Wed, Sep 20, 2017 at 4:18 AM, Tuomas Tynkkynen
<tuomas.tynkkynen at iki.fi> wrote:
> This board builds an U-Boot binary that is bootable with QEMU's 'virt'
> machine on ARM. The minimal QEMU command line is:
>
> qemu-system-arm -machine virt,highmem=off -bios u-boot.bin
>
> (Note that the 'highmem=off' parameter to the 'virt' machine is required for
> PCI to work in U-Boot.) This command line enables the following:
> - u-boot.bin loaded and executing in the emulated flash at address 0x0
> - A generated device tree blob placed at the start of RAM
> - A freely configurable amount of RAM, described by the DTB
> - A PL011 serial port, discoverable via the DTB
> - An ARMv7 architected timer
> - PSCI for rebooting the system
> - A generic ECAM-based PCI host controller, discoverable via the DTB
>
> Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus.
> The following ones are supported by both U-Boot and Linux:
>
> - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.:
> -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0
> - To add an Intel E1000 network adapter, pass e.g.:
> -net nic,model=e1000 -net user
With this parameter I got:
Warning: requested NIC (anonymous, model e1000) was not created (not
supported by this machine?)
I am using QEMU v2.5.0. It's better to mention the minimum required
QEMU version in the commit message as well.
> - To add an EHCI-compliant USB host controller, pass e.g.:
> -device usb-ehci,id=ehci
> - To add a NVMe disk, pass e.g.:
> -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo
>
> Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
> ---
> v2:
> - enable CONFIG_NVME
> - alphasort correctly
> - remove unnecessary gd declaration
> - move board under board/emulation
> - add MAINTAINERS
> ---
> arch/arm/Kconfig | 10 +++++++
> arch/arm/mach-qemu/Kconfig | 12 ++++++++
> board/emulation/qemu-arm/MAINTAINERS | 6 ++++
> board/emulation/qemu-arm/Makefile | 5 ++++
> board/emulation/qemu-arm/qemu-arm.c | 33 ++++++++++++++++++++
> configs/qemu_arm_defconfig | 28 +++++++++++++++++
> include/configs/qemu-arm.h | 58 ++++++++++++++++++++++++++++++++++++
> 7 files changed, 152 insertions(+)
> create mode 100644 arch/arm/mach-qemu/Kconfig
> create mode 100644 board/emulation/qemu-arm/MAINTAINERS
> create mode 100644 board/emulation/qemu-arm/Makefile
> create mode 100644 board/emulation/qemu-arm/qemu-arm.c
> create mode 100644 configs/qemu_arm_defconfig
> create mode 100644 include/configs/qemu-arm.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 53eae8953e..1de5be7a72 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -630,6 +630,14 @@ config ARCH_MX5
> select CPU_V7
> select BOARD_EARLY_INIT_F
>
> +config ARCH_QEMU
> + bool "QEMU Virtual Platform"
> + select CPU_V7
> + select ARCH_SUPPORT_PSCI
> + select DM
> + select DM_SERIAL
> + select OF_CONTROL
> +
> config ARCH_RMOBILE
> bool "Renesas ARM SoCs"
> select DM
> @@ -1142,6 +1150,8 @@ source "arch/arm/mach-rmobile/Kconfig"
>
> source "arch/arm/mach-meson/Kconfig"
>
> +source "arch/arm/mach-qemu/Kconfig"
> +
> source "arch/arm/mach-rockchip/Kconfig"
>
> source "arch/arm/mach-s5pc1xx/Kconfig"
> diff --git a/arch/arm/mach-qemu/Kconfig b/arch/arm/mach-qemu/Kconfig
> new file mode 100644
> index 0000000000..3500b56cb0
> --- /dev/null
> +++ b/arch/arm/mach-qemu/Kconfig
> @@ -0,0 +1,12 @@
> +if ARCH_QEMU
> +
> +config SYS_VENDOR
> + default "emulation"
> +
> +config SYS_BOARD
> + default "qemu-arm"
> +
> +config SYS_CONFIG_NAME
> + default "qemu-arm"
> +
> +endif
> diff --git a/board/emulation/qemu-arm/MAINTAINERS b/board/emulation/qemu-arm/MAINTAINERS
> new file mode 100644
> index 0000000000..a803061ff4
> --- /dev/null
> +++ b/board/emulation/qemu-arm/MAINTAINERS
> @@ -0,0 +1,6 @@
> +QEMU ARM 'VIRT' BOARD
> +M: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
> +S: Maintained
> +F: board/emulation/qemu-arm/
> +F: include/configs/qemu-arm.h
> +F: configs/qemu_arm_defconfig
> diff --git a/board/emulation/qemu-arm/Makefile b/board/emulation/qemu-arm/Makefile
> new file mode 100644
> index 0000000000..716a6e9c28
> --- /dev/null
> +++ b/board/emulation/qemu-arm/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += qemu-arm.o
> diff --git a/board/emulation/qemu-arm/qemu-arm.c b/board/emulation/qemu-arm/qemu-arm.c
> new file mode 100644
> index 0000000000..e29ba4630f
> --- /dev/null
> +++ b/board/emulation/qemu-arm/qemu-arm.c
> @@ -0,0 +1,33 @@
> +/*
> + * Copyright (c) 2017 Tuomas Tynkkynen
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#include <common.h>
> +#include <fdtdec.h>
> +
> +int board_init(void)
> +{
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + if (fdtdec_setup_memory_size() != 0)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> + fdtdec_setup_memory_banksize();
> +
> + return 0;
> +}
> +
> +void *board_fdt_blob_setup(void)
> +{
> + /* QEMU loads a generated DTB for us at the start of RAM. */
nits: remove the ending period
> + return (void *)CONFIG_SYS_SDRAM_BASE;
> +}
> diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
Can we use 'qemu-arm_defconfig", to be in consistent with the board name?
> new file mode 100644
> index 0000000000..2a8594d472
> --- /dev/null
> +++ b/configs/qemu_arm_defconfig
> @@ -0,0 +1,28 @@
> +CONFIG_ARM=y
> +CONFIG_ARM_SMCCC=y
> +CONFIG_ARCH_QEMU=y
> +CONFIG_AHCI=y
> +CONFIG_DISTRO_DEFAULTS=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +# CONFIG_CMD_IMLS is not set
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_USB=y
> +CONFIG_OF_BOARD=y
> +CONFIG_AHCI_PCI=y
> +CONFIG_BLK=y
> +# CONFIG_MMC is not set
> +CONFIG_DM_ETH=y
> +CONFIG_E1000=y
> +CONFIG_NVME=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_PCIE_ECAM_GENERIC=y
> +CONFIG_SCSI=y
> +CONFIG_DM_SCSI=y
> +CONFIG_SYSRESET=y
> +CONFIG_SYSRESET_PSCI=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_PCI=y
> diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
> new file mode 100644
> index 0000000000..4376a24787
> --- /dev/null
> +++ b/include/configs/qemu-arm.h
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright (c) 2017 Tuomas Tynkkynen
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <linux/sizes.h>
> +
> +/* Physical memory map */
> +#define CONFIG_SYS_TEXT_BASE 0x00000000
> +
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define CONFIG_SYS_SDRAM_BASE 0x40000000
> +
> +/* The DTB generated by QEMU is placed at start of RAM, stay away from there */
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
> +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
> +#define CONFIG_SYS_MALLOC_LEN SZ_16M
> +
> +/* QEMU's PL011 serial port is detected via FDT using the device model */
> +#define CONFIG_PL01X_SERIAL
> +
> +/* QEMU implements a 62.5MHz architected timer */
> +/* FIXME: can we rely on CNTFREQ instead of hardcoding this fact here? */
> +#define CONFIG_SYS_ARCH_TIMER
> +#define CONFIG_SYS_HZ 1000
> +#define CONFIG_SYS_HZ_CLOCK 62500000
> +
> +/* For block devices, QEMU emulates an ICH9 AHCI controller over PCI */
> +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 6
> +#define CONFIG_SCSI_AHCI
> +#define CONFIG_LIBATA
> +
> +/* Environment options */
> +#define CONFIG_ENV_SIZE SZ_64K
> +
> +#include <config_distro_defaults.h>
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + func(SCSI, scsi, 0)
> +
> +#include <config_distro_bootcmd.h>
> +
> +#define CONFIG_PREBOOT "pci enum"
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "fdt_high=0xffffffff\0" \
> + "initrd_high=0xffffffff\0" \
> + "fdt_addr=0x40000000\0" \
> + "scriptaddr=0x40200000\0" \
> + "pxefile_addr_r=0x40300000\0" \
> + "kernel_addr_r=0x40400000\0" \
> + "ramdisk_addr_r=0x44000000\0" \
> + BOOTENV
> +
> +#endif /* __CONFIG_H */
> --
Regards,
Bin
More information about the U-Boot
mailing list