[U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot

[Alexander Graf]

On 14.09.17 00:05, Rob Clark wrote:
> This patchset fleshes out EFI_LOADER enough to support booting an
> upstream \EFI\BOOT\bootaa64.efi (which then loads fallback.efi and
> then eventually the per-distro shim.efi which loads the per-distro
> grubaa64.efi) without resorting to hacks to hard-code u-boot to load
> a particular distro's grub, or other hacks like setting up the
> distro installation as live-media.
> 
> Background: with a normal UEFI implementation, the boot process is:
> 
> a) firmware (u-boot) looks at BootOrder and the BootXXXX variables
>     to try to determine what to boot.
> b) the firmware will look at the BootXXXX variables (which contain
>     an EFI_LOAD_OPTION "struct" in order specified by BootOrder, and
>     will boot the first bootable option.
> c) The EFI_LOAD_OPTION specifies a device-path which identifies the
>     device and file path of the .efi payload to exectute.
> 
> This is implemented with the 'bootefi bootmgr' command.
> 
> If there are no bootable options the firmware falls back to loading
> \EFI\BOOT\bootaa64.efi (exact name varies depending on arch), which
> for distro's using fallback/shim (which should include most modern
> linux distros) then loads fallback.efi which uses the
> EFI_SIMPLE_FILE_SYSTEM_PROTCOL and EFI_FILE_PROTOCOL to search for
> any \EFI\*\boot.csv, and will then set BootOrder and BootXXXX EFI
> variables accordingly so that on next boot fallback.efi is not
> necessary.
> 
> The last 5 patches are a bit unrelated, just pulling forward some of
> the patches I have from the next patchset, to get Shell.efi and SCT
> working.

I've pulled the patches into efi-next, but want to run them through 
Travis first and then do some smoke tests myself before sending them as 
pull request.

Please follow up with fixes to the "unsigned" type warnings. Just use 
"unsigned int" everywhere.


Alex