[U-Boot] [PATCH v2 3/7] armv8: fsl-layerscape: Avoid running dram_init_banksize again

[York Sun]

gd->ram_size is reduced in this function to reserve secure memory.
Avoid running this function again to further reduce memory size.
This fixes issue for SPL boot with PPA image loaded in which case
secure memory is incorrectly allocated due to repeated calling.

Signed-off-by: York Sun <york.sun at nxp.com>

---

Changes in v2:
New patch to fix gd->ram_size error after rebasing to latest mater.

 arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index d21a494..fe5f4a9 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -698,8 +698,19 @@ int dram_init_banksize(void)
 	 * memory. The DDR extends from low region to high region(s) presuming
 	 * no hole is created with DDR configuration. gd->arch.secure_ram tracks
 	 * the location of secure memory. gd->arch.resv_ram tracks the location
-	 * of reserved memory for Management Complex (MC).
+	 * of reserved memory for Management Complex (MC). Because gd->ram_size
+	 * is reduced by this function if secure memory is reserved, checking
+	 * gd->arch.secure_ram should be done to avoid running it repeatedly.
 	 */
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
+		debug("No need to run again, skip %s\n", __func__);
+
+		return 0;
+	}
+#endif
+
 	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
 		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
@@ -797,6 +808,11 @@ int dram_init_banksize(void)
 	}
 #endif
 
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	debug("%s is called. gd->ram_size is reduced to %lu\n",
+	      __func__, (ulong)gd->ram_size);
+#endif
+
 	return 0;
 }
 
-- 
2.7.4