[U-Boot] [PATCH] usb: xhci: Set number of event segments and entries to 1

[Marek Vasut]

The Linux kernel driver sets the number of event segments and entries
to 1 , while the initial import of the xhci code set that values to 3
for reasons unknown. While most controllers are fine with more event
segments with more entries, there are standard-conformant controllers
(ie. Renesas RCar xHCI) which only support 1 event segment.

Set the number of event segments and event entries back to 1 to allow
such controllers to work with U-Boot xHCI stack. Note that the Renesas
controller correctly indicates ERST Max = 1 in HCSPARAMS2[7:4] .

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Bin Meng <bmeng.cn at gmail.com>
---
 drivers/usb/host/xhci.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index a497d9d830..3377450fca 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1045,9 +1045,9 @@ struct xhci_scratchpad {
  * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
  * meaning 64 ring segments.
  * Initial allocated size of the ERST, in number of entries */
-#define	ERST_NUM_SEGS	3
+#define	ERST_NUM_SEGS	1
 /* Initial number of event segment rings allocated */
-#define	ERST_ENTRIES	3
+#define	ERST_ENTRIES	1
 /* Initial allocated size of the ERST, in number of entries */
 #define	ERST_SIZE	64
 /* Poll every 60 seconds */
-- 
2.11.0