[U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL

Marek Vasut marex at denx.de
Mon Sep 25 09:21:08 UTC 2017


On 09/25/2017 10:40 AM, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee at intel.com>
> 
> Add support to memory allocation in SPL for preparation to enable FAT
> in SPL. Memory allocation is needed by FAT to work properly.
> 
> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>

Gen 5 does have malloc support in SPL, so what's the deal here ?

> ---
>  include/configs/socfpga_common.h | 23 ++++++++++++++++++++++-
>  1 file changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index 7549ee8..9b6719e 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -280,17 +280,34 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>  /*
>   * SPL
>   *
> - * SRAM Memory layout:
> + * SRAM Memory layout for gen 5:
>   *
>   * 0xFFFF_0000 ...... Start of SRAM
>   * 0xFFFF_xxxx ...... Top of stack (grows down)
>   * 0xFFFF_yyyy ...... Malloc area
>   * 0xFFFF_zzzz ...... Global Data
>   * 0xFFFF_FF00 ...... End of SRAM
> + *
> + * SRAM Memory layout for Arria 10:
> + * 0xFFE0_0000 ...... Start of SRAM (bottom)
> + * 0xFFEx_xxxx ...... Top of stack (grows down to bottom)
> + * 0xFFEy_yyyy ...... Malloc area (grows up to top)
> + * 0xFFEz_zzzz ...... Global Data
> + * 0xFFE3_FFFF ...... End of SRAM (top)
>   */
>  #define CONFIG_SPL_FRAMEWORK
>  #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
>  #define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
> +#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> +/* SPL memory allocation configuration, it is required by FAT feature */
> +#ifndef CONFIG_SYS_SPL_MALLOC_START
> +#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00002000
> +#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_INIT_RAM_SIZE - \
> +					 GENERATED_GBL_DATA_SIZE - \
> +					 CONFIG_SYS_SPL_MALLOC_SIZE + \
> +					 CONFIG_SYS_INIT_RAM_ADDR)
> +#endif
> +#endif
>  
>  /* SPL SDMMC boot support */
>  #ifdef CONFIG_SPL_MMC_SUPPORT
> @@ -320,7 +337,11 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>  /*
>   * Stack setup
>   */
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
> +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> +#define CONFIG_SPL_STACK		(CONFIG_SYS_SPL_MALLOC_START - 1)
> +#endif
>  
>  /* Extra Environment */
>  #ifndef CONFIG_SPL_BUILD
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list