[U-Boot] [PATCH] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Maxime Ripard
maxime.ripard at free-electrons.com
Fri Sep 22 07:37:16 UTC 2017
Hi Antony,
On Thu, Sep 21, 2017 at 03:22:17PM +0000, Antony Antony wrote:
> Add initial DT for NanoPi NEO Plus2 by FriendlyARM
> - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU
> - 1 GB DDR3 RAM
> - 8GB eMMC flash (Samsung KLM8G1WEPD-B031)
> - micro SD card slot
> - Gigabit Ethernet (external RTL8211E-VB-CG chip)
> - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module)
> - 2x USB 2.0 host ports
>
> Signed-off-by: Antony Antony <antony at phenome.org>
> Tested-by: Antony Antony <antony at phenome.org>
You don't really need the tested-by, we kind of expect you to have
tested it already :)
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 113 ++++++++++++++++++++++++++++
> configs/nanopi_neo_plus2_defconfig | 21 ++++++
> 3 files changed, 135 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> create mode 100644 configs/nanopi_neo_plus2_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index fee4680..295a675 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -333,6 +333,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \
> sun8i-v3s-licheepi-zero.dtb
> dtb-$(CONFIG_MACH_SUN50I_H5) += \
> sun50i-h5-nanopi-neo2.dtb \
> + sun50i-h5-nanopi-neo-plus2.dtb \
> sun50i-h5-orangepi-pc2.dtb \
> sun50i-h5-orangepi-prime.dtb \
> sun50i-h5-orangepi-zero-plus2.dtb
> diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> new file mode 100644
> index 0000000..7d12774
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> @@ -0,0 +1,113 @@
> +/*
> + * Copyright (C) 2017 Antony Antony <antony at phenome.org>
> + * Copyright (c) 2016 ARM Ltd.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h5.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "FriendlyARM NanoPi NEO Plus 2";
> + compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + reg = <0x40000000 0x40000000>;
> + };
That is going to be automatically added, there's no need for it.
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + compatible = "allwinner,sun50i-h5-mmc",
> + "allwinner,sun50i-a64-mmc",
> + "allwinner,sun5i-a13-mmc";
It's not compatible with the A13.
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + status = "okay";
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_8bit_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
> diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig
> new file mode 100644
> index 0000000..ff99213
> --- /dev/null
> +++ b/configs/nanopi_neo_plus2_defconfig
> @@ -0,0 +1,21 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
I'd like to make it more trivial to select this from the boards.
One way would be to select that option from SPL_SPI_SUNXI.
> +CONFIG_MACH_SUN50I_H5=y
> +CONFIG_DRAM_CLK=408
> +CONFIG_DRAM_ZQ=3881977
> +CONFIG_MACPWR="PD6"
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo-plus2"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_ISO_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_SPL_SPI_SUNXI=y
> +CONFIG_SUN8I_EMAC=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_SD_BOOT=y
We don't use SD_BOOT.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170922/f31f903d/attachment.sig>
More information about the U-Boot
mailing list