[U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
york.sun at nxp.com
Tue Sep 12 15:59:46 UTC 2017
Tom,
The following changes since commit 584f316f115df52fd09a6cf699b29dcf824b4da5:
cmd: ide: Make the first device the default one (2017-09-10 12:27:43 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 42f43aa25876d1c77002ee5f333ab36dcb01d719:
armv8: fsl-layerscape: Add back L3 flushing for all exception levels (2017-09-11 08:02:13 -0700)
----------------------------------------------------------------
Ashish Kumar (6):
fsl-layerscape: Consolidate registers space defination for CCI-400 bus
armv8: fsl-lsch3: Make CCN-504 related code conditional
armv8: ls1088a: Add NXP LS1088A SoC support
armv8: ls1088ardb: Add support for LS1088ARDB platform
armv8: ls1088aqds: Add support of LS1088AQDS
armv8: fsl-layerscape: Support to add RGMII for ls1088aqds
Hou Zhiqiang (3):
armv8: ls1088a: fix the MMU table for pcie config space
armv8: ls1088a: add PCIe dts node
armv8: ls1088a: Enable PCIe in defconfigs
Prabhakar Kushwaha (1):
armv8: ls1088aqds: Add support of EC1 and EC2
Priyanka Jain (1):
drivers:net:fsl-mc: Update MC address calculation
Ran Wang (10):
armv8: fsl: Use correct conditional compile for ls1012a
armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32()
armv8: Add workaround for USB erratum A-009008
armv8: Add workaround for USB erratum A-009798
armv8: Add workaround for USB erratum A-008997
armv8: Add workaround for USB erratum A-009007
armv7: Add workaround for USB erratum A-009008
armv7: Add workaround for USB erratum A-009798
armv7: Add workaround for USB erratum A-008997
armv7: Add workaround for USB erratum A-009007
Sumit Garg (1):
SECURE_BOOT: Unify memory map for Layerscape based platforms
Suresh Gupta (1):
armv8: fsl-layerscape: Fix final MMU table for QSPI and IFC
Udit Agarwal (2):
LS2080ARDB: QSPI boot: Secure Boot image validation
armv8: LS2080ARDB: Add secure boot defconfig for QSPI boot.
York Sun (7):
tools: pblimage: Fix address calculation
cmd: spl: Fix compiling warning
spl: fit: Eanble GZIP support for image decompression
spl: fit: Support both external and embedded data
spl: fit: Add booting OS first
armv8: fsl-layerscape: Fix MC reserved memory calculation
armv8: fsl-layerscape: Add back L3 flushing for all exception levels
Zhao Qiang (1):
QE: Set QE_IRAM_READY after uploading firmware
README | 13 +
arch/arm/Kconfig | 27 +
arch/arm/cpu/armv7/ls102xa/Kconfig | 36 ++
arch/arm/cpu/armv7/ls102xa/soc.c | 53 +-
arch/arm/cpu/armv8/Kconfig | 1 +
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 113 +++-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 20 +-
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 43 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 19 +
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 12 +-
arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 126 ++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 122 +++-
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/fsl-ls1088a-qds.dts | 70 +++
arch/arm/dts/fsl-ls1088a-rdb.dts | 40 ++
arch/arm/dts/fsl-ls1088a.dtsi | 126 ++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 62 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 10 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 4 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 68 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 34 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 8 +
.../asm/arch-fsl-layerscape/stream_id_lsch3.h | 14 +
arch/arm/include/asm/arch-ls102xa/config.h | 1 -
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 64 +-
arch/arm/include/asm/fsl_secure_boot.h | 59 +-
board/freescale/ls1012afrdm/ls1012afrdm.c | 4 +-
board/freescale/ls1012aqds/ls1012aqds.c | 4 +-
board/freescale/ls1012ardb/ls1012ardb.c | 3 +-
board/freescale/ls1021aqds/ls1021aqds.c | 9 +-
board/freescale/ls1088a/Kconfig | 31 +
board/freescale/ls1088a/MAINTAINERS | 15 +
board/freescale/ls1088a/Makefile | 10 +
board/freescale/ls1088a/README | 145 +++++
board/freescale/ls1088a/ddr.c | 102 +++
board/freescale/ls1088a/ddr.h | 49 ++
board/freescale/ls1088a/eth_ls1088aqds.c | 683 +++++++++++++++++++++
board/freescale/ls1088a/eth_ls1088ardb.c | 102 +++
board/freescale/ls1088a/ls1088a.c | 406 ++++++++++++
board/freescale/ls1088a/ls1088a_qixis.h | 39 ++
board/freescale/ls2080aqds/ls2080aqds.c | 7 +-
board/freescale/ls2080ardb/MAINTAINERS | 5 +
board/freescale/ls2080ardb/ls2080ardb.c | 4 +
cmd/spl.c | 8 +-
common/spl/spl_fit.c | 144 +++--
configs/ls1088aqds_qspi_defconfig | 33 +
configs/ls1088ardb_qspi_defconfig | 33 +
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 48 ++
doc/uImage.FIT/multi_spl.its | 7 +
doc/uImage.FIT/source_file_format.txt | 4 +
drivers/ddr/fsl/util.c | 2 +-
drivers/net/fsl-mc/mc.c | 11 +-
drivers/net/ldpaa_eth/Makefile | 1 +
drivers/net/ldpaa_eth/ldpaa_wriop.c | 9 +
drivers/net/ldpaa_eth/ls1088a.c | 114 ++++
drivers/qe/qe.c | 4 +-
include/configs/ls1088a_common.h | 205 +++++++
include/configs/ls1088aqds.h | 414 +++++++++++++
include/configs/ls1088ardb.h | 317 ++++++++++
include/fsl-mc/ldpaa_wriop.h | 2 +
include/fsl_immap.h | 51 ++
lib/Kconfig | 12 +
lib/Makefile | 5 +-
scripts/config_whitelist.txt | 1 -
tools/pblimage.c | 2 +-
67 files changed, 3972 insertions(+), 228 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
create mode 100644 arch/arm/dts/fsl-ls1088a-qds.dts
create mode 100644 arch/arm/dts/fsl-ls1088a-rdb.dts
create mode 100644 arch/arm/dts/fsl-ls1088a.dtsi
create mode 100644 board/freescale/ls1088a/Kconfig
create mode 100644 board/freescale/ls1088a/MAINTAINERS
create mode 100644 board/freescale/ls1088a/Makefile
create mode 100644 board/freescale/ls1088a/README
create mode 100644 board/freescale/ls1088a/ddr.c
create mode 100644 board/freescale/ls1088a/ddr.h
create mode 100644 board/freescale/ls1088a/eth_ls1088aqds.c
create mode 100644 board/freescale/ls1088a/eth_ls1088ardb.c
create mode 100644 board/freescale/ls1088a/ls1088a.c
create mode 100644 board/freescale/ls1088a/ls1088a_qixis.h
create mode 100644 configs/ls1088aqds_qspi_defconfig
create mode 100644 configs/ls1088ardb_qspi_defconfig
create mode 100644 configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
create mode 100644 drivers/net/ldpaa_eth/ls1088a.c
create mode 100644 include/configs/ls1088a_common.h
create mode 100644 include/configs/ls1088aqds.h
create mode 100644 include/configs/ls1088ardb.h
Thanks.
York
More information about the U-Boot
mailing list