[U-Boot] [PATCH 002/080] mpc83xx: spd_sdram: Fix whitespace style violations

Mario Six mario.six at gdsys.cc
Fri Sep 29 12:51:20 UTC 2017


Fix whitespace style violations in the MPC83xx SPD-SDRAM code.

Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
 arch/powerpc/cpu/mpc83xx/spd_sdram.c | 134 +++++++++++++++++------------------
 1 file changed, 67 insertions(+), 67 deletions(-)

diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
index 21ab0153fc..48814a09f2 100644
--- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c
+++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
@@ -160,12 +160,13 @@ long int spd_sdram()
 
 	/* Read SPD parameters with I2C */
 	CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, SPD_EEPROM_OFFSET,
-		SPD_EEPROM_ADDR_LEN, (uchar *) &spd, sizeof(spd));
+			    SPD_EEPROM_ADDR_LEN, (uchar *)&spd, sizeof(spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
 #endif
 	/* Check the memory type */
-	if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
+	if (spd.mem_type != SPD_MEMTYPE_DDR &&
+	    spd.mem_type != SPD_MEMTYPE_DDR2) {
 		debug("DDR: Module mem type is %02X\n", spd.mem_type);
 		return 0;
 	}
@@ -185,14 +186,14 @@ long int spd_sdram()
 	/* Check if the number of row of the module is in the range of DDRC */
 	if (spd.nrow_addr < 12 || spd.nrow_addr > 15) {
 		printf("DDR: Row number is out of range of DDRC, row=%02X\n",
-							 spd.nrow_addr);
+		       spd.nrow_addr);
 		return 0;
 	}
 
 	/* Check if the number of col of the module is in the range of DDRC */
 	if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
 		printf("DDR: Col number is out of range of DDRC, col=%02X\n",
-							 spd.ncol_addr);
+		       spd.ncol_addr);
 		return 0;
 	}
 
@@ -223,22 +224,22 @@ long int spd_sdram()
 			    | (odt_wr_cfg << 16)
 			    | ((spd.nbanks == 8 ? 1 : 0) << 14)
 			    | ((spd.nrow_addr - 12) << 8)
-			    | (spd.ncol_addr - 8) );
+			    | (spd.ncol_addr - 8));
 	debug("\n");
-	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
-	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+	debug("cs0_bnds = 0x%08x\n", ddr->csbnds[0].csbnds);
+	debug("cs0_config = 0x%08x\n", ddr->cs_config[0]);
 
 	if (n_ranks == 2) {
-		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
 		ddr->cs_config[1] = ( 1<<31
+		ddr->csbnds[1].csbnds = ((banksize(spd.row_dens) >> 8)
+				  | ((banksize(spd.row_dens) >> 23) - 1));
 				    | (odt_rd_cfg << 20)
 				    | (odt_wr_cfg << 16)
 				    | ((spd.nbanks == 8 ? 1 : 0) << 14)
 				    | ((spd.nrow_addr - 12) << 8)
-				    | (spd.ncol_addr - 8) );
-		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
-		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+				    | (spd.ncol_addr - 8));
+		debug("cs1_bnds = 0x%08x\n", ddr->csbnds[1].csbnds);
+		debug("cs1_config = 0x%08x\n", ddr->cs_config[1]);
 	}
 
 #else
@@ -248,22 +249,22 @@ long int spd_sdram()
 			    | (odt_wr_cfg << 16)
 			    | ((spd.nbanks == 8 ? 1 : 0) << 14)
 			    | ((spd.nrow_addr - 12) << 8)
-			    | (spd.ncol_addr - 8) );
+			    | (spd.ncol_addr - 8));
 	debug("\n");
-	debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
-	debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
+	debug("cs2_bnds = 0x%08x\n", ddr->csbnds[2].csbnds);
+	debug("cs2_config = 0x%08x\n", ddr->cs_config[2]);
 
 	if (n_ranks == 2) {
-		ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
 		ddr->cs_config[3] = ( 1<<31
+		ddr->csbnds[3].csbnds = ((banksize(spd.row_dens) >> 8)
+				  | ((banksize(spd.row_dens) >> 23) - 1));
 				    | (odt_rd_cfg << 20)
 				    | (odt_wr_cfg << 16)
 				    | ((spd.nbanks == 8 ? 1 : 0) << 14)
 				    | ((spd.nrow_addr - 12) << 8)
-				    | (spd.ncol_addr - 8) );
-		debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
-		debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
+				    | (spd.ncol_addr - 8));
+		debug("cs3_bnds = 0x%08x\n", ddr->csbnds[3].csbnds);
+		debug("cs3_config = 0x%08x\n", ddr->cs_config[3]);
 	}
 #endif
 
@@ -304,19 +305,19 @@ long int spd_sdram()
 	 *	5.0		5	1001
 	 */
 	caslat = __ilog2(spd.cas_lat);
-	if ((spd.mem_type == SPD_MEMTYPE_DDR)
-	    && (caslat > 6)) {
+	if (spd.mem_type == SPD_MEMTYPE_DDR &&
+	    caslat > 6) {
 		printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
 		return 0;
-	} else if (spd.mem_type == SPD_MEMTYPE_DDR2
-		   && (caslat < 2 || caslat > 5)) {
+	} else if (spd.mem_type == SPD_MEMTYPE_DDR2 &&
+		   (caslat < 2 || caslat > 5)) {
 		printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
 		       spd.cas_lat);
 		return 0;
 	}
 	debug("DDR: caslat SPD bit is %d\n", caslat);
 
-	max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
+	max_bus_clk = 1000 * 10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
 			+ (spd.clk_cycle & 0x0f));
 	max_data_rate = max_bus_clk * 2;
 
@@ -332,7 +333,7 @@ long int spd_sdram()
 			caslat = 4;
 		if (ddrc_clk <= 460 && ddrc_clk > 350)
 			effective_data_rate = 400;
-		else if (ddrc_clk <=350 && ddrc_clk > 280)
+		else if (ddrc_clk <= 350 && ddrc_clk > 280)
 			effective_data_rate = 333;
 		else if (ddrc_clk <= 280 && ddrc_clk > 230)
 			effective_data_rate = 266;
@@ -395,7 +396,7 @@ long int spd_sdram()
 		if (ddrc_clk <= 350 && ddrc_clk > 280) {
 			/* DDR controller clk at 280~350 */
 			printf("DDR: DDR controller freq is more than "
-				"max data rate of the module\n");
+			       "max data rate of the module\n");
 			return 0;
 		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
 			/* DDR controller clk at 230~280 */
@@ -411,7 +412,7 @@ long int spd_sdram()
 		if (ddrc_clk <= 350 && ddrc_clk > 230) {
 			/* DDR controller clk at 230~350 */
 			printf("DDR: DDR controller freq is more than "
-				"max data rate of the module\n");
+			       "max data rate of the module\n");
 			return 0;
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
 			/* DDR controller clk at 90~230 */
@@ -427,7 +428,7 @@ long int spd_sdram()
 	 * Errata DDR6 work around: input enable 2 cycles earlier.
 	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
 	 */
-	if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
+	if (PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR) {
 		if (caslat == 2)
 			ddr->debug_reg = 0x201c0000; /* CL=2 */
 		else if (caslat == 3)
@@ -528,11 +529,11 @@ long int spd_sdram()
 	trfc_low = (trfc_clk - 8) & 0xf;
 
 	ddr->timing_cfg_1 =
-	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |	/* PRETOACT */
-	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | /* ACTTOPRE */
-	     (trcd_clk << 20 ) |				/* ACTTORW */
-	     (caslat_ctrl << 16 ) |				/* CASLAT */
-	     (trfc_low << 12 ) |				/* REFEC */
+	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28) |	/* PRETOACT */
+	     ((picos_to_clk(spd.tras * 1000) & 0x0f) << 24) |	/* ACTTOPRE */
+	     (trcd_clk << 20) |					/* ACTTORW */
+	     (caslat_ctrl << 16) |				/* CASLAT */
+	     (trfc_low << 12) |					/* REFEC */
 	     ((twr_clk & 0x07) << 8) |				/* WRRREC */
 	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) |	/* ACTTOACT */
 	     ((twtr_clk & 0x07) << 0)				/* WRTORD */
@@ -704,33 +705,33 @@ long int spd_sdram()
 	debug("DDR: sdram_mode2 = 0x%08x\n", ddr->sdram_mode2);
 
 	switch (spd.refresh) {
-		case 0x00:
-		case 0x80:
-			refresh_clk = picos_to_clk(15625000);
-			break;
-		case 0x01:
-		case 0x81:
-			refresh_clk = picos_to_clk(3900000);
-			break;
-		case 0x02:
-		case 0x82:
-			refresh_clk = picos_to_clk(7800000);
-			break;
-		case 0x03:
-		case 0x83:
-			refresh_clk = picos_to_clk(31300000);
-			break;
-		case 0x04:
-		case 0x84:
-			refresh_clk = picos_to_clk(62500000);
-			break;
-		case 0x05:
-		case 0x85:
-			refresh_clk = picos_to_clk(125000000);
-			break;
-		default:
-			refresh_clk = 0x512;
-			break;
+	case 0x00:
+	case 0x80:
+		refresh_clk = picos_to_clk(15625000);
+		break;
+	case 0x01:
+	case 0x81:
+		refresh_clk = picos_to_clk(3900000);
+		break;
+	case 0x02:
+	case 0x82:
+		refresh_clk = picos_to_clk(7800000);
+		break;
+	case 0x03:
+	case 0x83:
+		refresh_clk = picos_to_clk(31300000);
+		break;
+	case 0x04:
+	case 0x84:
+		refresh_clk = picos_to_clk(62500000);
+		break;
+	case 0x05:
+	case 0x85:
+		refresh_clk = picos_to_clk(125000000);
+		break;
+	default:
+		refresh_clk = 0x512;
+		break;
 	}
 
 	/*
@@ -823,7 +824,7 @@ long int spd_sdram()
 	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
 	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
 #endif
-	debug("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
+	debug("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON" : "OFF");
 
 #if defined(CONFIG_DDR_2T_TIMING)
 	/*
@@ -866,7 +867,7 @@ static __inline__ unsigned long get_tbms (void)
 	tmp = (unsigned long long)(tbu1);
 	tmp = (tmp << 32);
 	tmp += (unsigned long long)(tbl);
-	ms = tmp/(tbclk/1000);
+	ms = tmp / (tbclk / 1000);
 
 	return ms;
 }
@@ -877,7 +878,7 @@ static __inline__ unsigned long get_tbms (void)
 void ddr_enable_ecc(unsigned int dram_size)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ddr83xx_t *ddr= &immap->ddr;
+	volatile ddr83xx_t *ddr = &immap->ddr;
 	unsigned long t_start, t_end;
 	register u64 *p;
 	register uint size;
@@ -893,9 +894,8 @@ void ddr_enable_ecc(unsigned int dram_size)
 #else
 	debug("ddr init: CPU FP write method\n");
 	size = dram_size;
-	for (p = 0; p < (u64*)(size); p++) {
-		ppcDWstore((u32*)p, pattern);
-	}
+	for (p = 0; p < (u64 *)(size); p++)
+		ppcDWstore((u32 *)p, pattern);
 	__asm__ __volatile__ ("sync");
 #endif
 
-- 
2.11.0



More information about the U-Boot mailing list