[U-Boot] [PATCH 13/13] x86: Support Intel Cherry Hill board

[Bin Meng]

On Sat, Aug 26, 2017 at 9:39 PM, Simon Glass <sjg at chromium.org> wrote:
> On 15 August 2017 at 23:42, Bin Meng <bmeng.cn at gmail.com> wrote:
>> This adds support to Intel Cherry Hill board, a board based on
>> Intel Braswell SoC. The following devices are validated:
>>
>> - serial port as the serial console
>> - on-board Realtek 8169 ethernet controller
>> - SATA AHCI controller
>> - EMMC/SDHC controller
>> - USB 3.0 xHCI controller
>> - PCIe x1 slot with a graphics card
>> - ICH SPI controller with an 8MB Macronix SPI flash
>> - Integrated graphics device as the video console
>>
>> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>>
>> ---
>>
>>  arch/x86/dts/Makefile               |   1 +
>>  arch/x86/dts/cherryhill.dts         | 215 +++++++++++++
>>  board/intel/Kconfig                 |  10 +
>>  board/intel/cherryhill/Kconfig      |  25 ++
>>  board/intel/cherryhill/MAINTAINERS  |   6 +
>>  board/intel/cherryhill/Makefile     |   7 +
>>  board/intel/cherryhill/cherryhill.c | 596 ++++++++++++++++++++++++++++++++++++
>>  board/intel/cherryhill/start.S      |   9 +
>>  configs/cherryhill_defconfig        |  36 +++
>>  doc/README.x86                      |  30 ++
>>  include/configs/cherryhill.h        |  22 ++
>>  11 files changed, 957 insertions(+)
>>  create mode 100644 arch/x86/dts/cherryhill.dts
>>  create mode 100644 board/intel/cherryhill/Kconfig
>>  create mode 100644 board/intel/cherryhill/MAINTAINERS
>>  create mode 100644 board/intel/cherryhill/Makefile
>>  create mode 100644 board/intel/cherryhill/cherryhill.c
>>  create mode 100644 board/intel/cherryhill/start.S
>>  create mode 100644 configs/cherryhill_defconfig
>>  create mode 100644 include/configs/cherryhill.h
>
> Reviewed-by: Simon Glass <sjg at chromium.org>

applied to u-boot-x86, thanks!