[U-Boot] [PATCH v3 07/14] fit: Introduce methods for applying overlays on fit-load
Pantelis Antoniou
pantelis.antoniou at konsulko.com
Mon Sep 4 20:12:16 UTC 2017
Introduce an overlay based method for constructing a base DT blob
to pass to the kernel.
It is based on a specific method now to get the FDT from a FIT image
named boot_get_fdt_fit().
Signed-off-by: Pantelis Antoniou <pantelis.antoniou at konsulko.com>
---
common/image-fdt.c | 7 +--
common/image-fit.c | 181 +++++++++++++++++++++++++++++++++++++++++++++++++++--
include/image.h | 25 ++++++++
3 files changed, 205 insertions(+), 8 deletions(-)
diff --git a/common/image-fdt.c b/common/image-fdt.c
index da4d007..a2ef409 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -356,17 +356,16 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
if (fit_check_format(buf)) {
ulong load, len;
- fdt_noffset = fit_image_load(images,
+ fdt_noffset = boot_get_fdt_fit(images,
fdt_addr, &fit_uname_fdt,
&fit_uname_config,
- arch, IH_TYPE_FLATDT,
- BOOTSTAGE_ID_FIT_FDT_START,
- FIT_LOAD_OPTIONAL, &load, &len);
+ arch, &load, &len);
images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
images->fit_uname_fdt = fit_uname_fdt;
images->fit_noffset_fdt = fdt_noffset;
fdt_addr = load;
+
break;
} else
#endif
diff --git a/common/image-fit.c b/common/image-fit.c
index e75cb64..7f17fd1 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -19,6 +19,7 @@
#include <errno.h>
#include <mapmem.h>
#include <asm/io.h>
+#include <malloc.h>
DECLARE_GLOBAL_DATA_PTR;
#endif /* !USE_HOSTCC*/
@@ -434,6 +435,10 @@ void fit_image_print(const void *fit, int image_noffset, const char *p)
printf("0x%08lx\n", load);
}
+ /* optional load address for FDT */
+ if (type == IH_TYPE_FLATDT && !fit_image_get_load(fit, image_noffset, &load))
+ printf("%s Load Address: 0x%08lx\n", p, load);
+
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_RAMDISK)) {
ret = fit_image_get_entry(fit, image_noffset, &entry);
@@ -1454,6 +1459,8 @@ int fit_conf_get_node(const void *fit, const char *conf_uname)
{
int noffset, confs_noffset;
int len;
+ const char *s;
+ char *conf_uname_copy = NULL;
confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
if (confs_noffset < 0) {
@@ -1475,12 +1482,29 @@ int fit_conf_get_node(const void *fit, const char *conf_uname)
debug("Found default configuration: '%s'\n", conf_uname);
}
+ s = strchr(conf_uname, '#');
+ if (s) {
+ len = s - conf_uname;
+ conf_uname_copy = malloc(len + 1);
+ if (!conf_uname_copy) {
+ debug("Can't allocate uname copy: '%s'\n",
+ conf_uname);
+ return -ENOMEM;
+ }
+ memcpy(conf_uname_copy, conf_uname, len);
+ conf_uname_copy[len] = '\0';
+ conf_uname = conf_uname_copy;
+ }
+
noffset = fdt_subnode_offset(fit, confs_noffset, conf_uname);
if (noffset < 0) {
debug("Can't get node offset for configuration unit name: '%s' (%s)\n",
conf_uname, fdt_strerror(noffset));
}
+ if (conf_uname_copy)
+ free(conf_uname_copy);
+
return noffset;
}
@@ -1527,7 +1551,7 @@ void fit_conf_print(const void *fit, int noffset, const char *p)
char *desc;
const char *uname;
int ret;
- int loadables_index;
+ int fdt_index, loadables_index;
/* Mandatory properties */
ret = fit_get_desc(fit, noffset, &desc);
@@ -1549,9 +1573,17 @@ void fit_conf_print(const void *fit, int noffset, const char *p)
if (uname)
printf("%s Init Ramdisk: %s\n", p, uname);
- uname = fdt_getprop(fit, noffset, FIT_FDT_PROP, NULL);
- if (uname)
- printf("%s FDT: %s\n", p, uname);
+ for (fdt_index = 0;
+ uname = fdt_stringlist_get(fit, noffset, FIT_FDT_PROP,
+ fdt_index, NULL), uname;
+ fdt_index++) {
+
+ if (fdt_index == 0)
+ printf("%s FDT: ", p);
+ else
+ printf("%s ", p);
+ printf("%s\n", uname);
+ }
uname = fdt_getprop(fit, noffset, FIT_FPGA_PROP, NULL);
if (uname)
@@ -1888,3 +1920,144 @@ int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
return ret;
}
+
+#ifndef USE_HOSTCC
+int boot_get_fdt_fit(bootm_headers_t *images, ulong addr,
+ const char **fit_unamep, const char **fit_uname_configp,
+ int arch, ulong *datap, ulong *lenp)
+{
+ int fdt_noffset, cfg_noffset, count;
+ const void *fit;
+ const char *fit_uname = NULL;
+ const char *fit_uname_config = NULL;
+ char *fit_uname_config_copy = NULL;
+ char *next_config = NULL;
+ ulong load, len;
+#ifdef CONFIG_OF_LIBFDT_OVERLAY
+ ulong image_start, image_end;
+ ulong ovload, ovlen;
+ const char *uconfig;
+ const char *uname;
+ void *base, *ov;
+ int i, err, noffset, ov_noffset;
+#endif
+
+ fit_uname = fit_unamep ? *fit_unamep : NULL;
+
+ if (fit_uname_configp && *fit_uname_configp) {
+ fit_uname_config_copy = strdup(*fit_uname_configp);
+ if (!fit_uname_config_copy)
+ return -ENOMEM;
+
+ next_config = strchr(fit_uname_config_copy, '#');
+ if (next_config)
+ *next_config++ = '\0';
+ if (next_config - 1 > fit_uname_config_copy)
+ fit_uname_config = fit_uname_config_copy;
+ }
+
+ fdt_noffset = fit_image_load(images,
+ addr, &fit_uname, &fit_uname_config,
+ arch, IH_TYPE_FLATDT,
+ BOOTSTAGE_ID_FIT_FDT_START,
+ FIT_LOAD_OPTIONAL, &load, &len);
+
+ if (fdt_noffset < 0)
+ goto out;
+
+ debug("fit_uname=%s, fit_uname_config=%s\n",
+ fit_uname ? fit_uname : "<NULL>",
+ fit_uname_config ? fit_uname_config : "<NULL>");
+
+ fit = map_sysmem(addr, 0);
+
+ cfg_noffset = fit_conf_get_node(fit, fit_uname_config);
+
+ /* single blob, or error just return as well */
+ count = fit_conf_get_prop_node_count(fit, cfg_noffset, FIT_FDT_PROP);
+ if (count <= 1 && !next_config)
+ goto out;
+
+ /* we need to apply overlays */
+
+#ifdef CONFIG_OF_LIBFDT_OVERLAY
+ image_start = addr;
+ image_end = addr + fit_get_size(fit);
+ /* verify that relocation took place by load address not being in fit */
+ if (load >= image_start && load < image_end) {
+ /* check is simplified; fit load checks for overlaps */
+ printf("Overlayed FDT requires relocation\n");
+ fdt_noffset = -EBADF;
+ goto out;
+ }
+
+ base = map_sysmem(load, len);
+
+ /* apply extra configs in FIT first, followed by args */
+ for (i = 1; ; i++) {
+ if (i < count) {
+ noffset = fit_conf_get_prop_node_index(fit, cfg_noffset,
+ FIT_FDT_PROP, i);
+ uname = fit_get_name(fit, noffset, NULL);
+ uconfig = NULL;
+ } else {
+ if (!next_config)
+ break;
+ uconfig = next_config;
+ next_config = strchr(next_config, '#');
+ if (next_config)
+ *next_config++ = '\0';
+ uname = NULL;
+ }
+
+ debug("%d: using uname=%s uconfig=%s\n", i, uname, uconfig);
+
+ ov_noffset = fit_image_load(images,
+ addr, &uname, &uconfig,
+ arch, IH_TYPE_FLATDT,
+ BOOTSTAGE_ID_FIT_FDT_START,
+ FIT_LOAD_REQUIRED, &ovload, &ovlen);
+ if (ov_noffset < 0) {
+ printf("load of %s failed\n", uname);
+ continue;
+ }
+ debug("%s loaded at 0x%08lx len=0x%08lx\n",
+ uname, ovload, ovlen);
+ ov = map_sysmem(ovload, ovlen);
+
+ base = map_sysmem(load, len + ovlen);
+ err = fdt_open_into(base, base, len + ovlen);
+ if (err < 0) {
+ printf("failed on fdt_open_into\n");
+ fdt_noffset = err;
+ goto out;
+ }
+ /* the verbose method prints out messages on error */
+ err = fdt_overlay_apply_verbose(base, ov);
+ if (err < 0) {
+ fdt_noffset = err;
+ goto out;
+ }
+ fdt_pack(base);
+ len = fdt_totalsize(base);
+ }
+#else
+ printf("config with overlays but CONFIG_OF_LIBFDT_OVERLAY not set\n");
+ fdt_noffset = -EBADF;
+#endif
+
+out:
+ if (datap)
+ *datap = load;
+ if (lenp)
+ *lenp = len;
+ if (fit_unamep)
+ *fit_unamep = fit_uname;
+ if (fit_uname_configp)
+ *fit_uname_configp = fit_uname_config;
+
+ if (fit_uname_config_copy)
+ free(fit_uname_config_copy);
+ return fdt_noffset;
+}
+#endif
diff --git a/include/image.h b/include/image.h
index 1f4bfda..eca9b46 100644
--- a/include/image.h
+++ b/include/image.h
@@ -593,6 +593,31 @@ int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
ulong *setup_start, ulong *setup_len);
/**
+ * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays)
+ *
+ * This deals with all aspects of loading an DTB from a FIT.
+ * The correct base image based on configuration will be selected, and
+ * then any overlays specified will be applied (as present in fit_uname_configp).
+ *
+ * @param images Boot images structure
+ * @param addr Address of FIT in memory
+ * @param fit_unamep On entry this is the requested image name
+ * (e.g. "kernel at 1") or NULL to use the default. On exit
+ * points to the selected image name
+ * @param fit_uname_configp On entry this is the requested configuration
+ * name (e.g. "conf at 1") or NULL to use the default. On
+ * exit points to the selected configuration name.
+ * @param arch Expected architecture (IH_ARCH_...)
+ * @param datap Returns address of loaded image
+ * @param lenp Returns length of loaded image
+ *
+ * @return node offset of base image, or -ve error code on error
+ */
+int boot_get_fdt_fit(bootm_headers_t *images, ulong addr,
+ const char **fit_unamep, const char **fit_uname_configp,
+ int arch, ulong *datap, ulong *lenp);
+
+/**
* fit_image_load() - load an image from a FIT
*
* This deals with all aspects of loading an image from a FIT, including
--
2.1.4
More information about the U-Boot
mailing list