[U-Boot] [RESEND PATCH v3 5/7] Kconfig: Add LTC3882 voltage regulator config

[Rajesh Bhagat]

Adds below LTC3882 voltage regulator config:
CONFIG_VOL_MONITOR_LTC3882_READ
CONFIG_VOL_MONITOR_LTC3882_SET

Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
---
 board/freescale/common/Kconfig | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index 8a5c456..3f44797 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -18,3 +18,19 @@ config CMD_ESBC_VALIDATE
 
 	    esbc_validate - validate signature using RSA verification
 	    esbc_halt - put the core in spin loop (Secure Boot Only)
+
+config VOL_MONITOR_LTC3882_READ
+	depends on VID
+	bool "Enable the LTC3882 voltage monitor read"
+	default n
+	help
+	 This option enables LTC3882 voltage monitor read
+	 functionality. It is used by common VID driver.
+
+config VOL_MONITOR_LTC3882_SET
+	depends on VID
+	bool "Enable the LTC3882 voltage monitor set"
+	default n
+	help
+	 This option enables LTC3882 voltage monitor set
+	 functionality. It is used by common VID driver.
-- 
2.7.4