[U-Boot] [PATCH v2 01/26] mmc: dm: get the IO-line and main voltage regulators from the dts

[Jean-Jacques Hiblot]

Get a reference to the regulator devices from the dts and store them
in the struct mmc for later use.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
 drivers/mmc/mmc.c | 24 ++++++++++++++----------
 include/mmc.h     |  4 ++++
 2 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 38d2e07..11285be 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1618,21 +1618,25 @@ __weak void board_mmc_power_init(void)
 static int mmc_power_init(struct mmc *mmc)
 {
 #if CONFIG_IS_ENABLED(DM_MMC)
-#if defined(CONFIG_DM_REGULATOR) && !defined(CONFIG_SPL_BUILD)
-	struct udevice *vmmc_supply;
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	int ret;
 
 	ret = device_get_supply_regulator(mmc->dev, "vmmc-supply",
-					  &vmmc_supply);
-	if (ret) {
+					  &mmc->vmmc_supply);
+	if (ret)
 		debug("%s: No vmmc supply\n", mmc->dev->name);
-		return 0;
-	}
 
-	ret = regulator_set_enable(vmmc_supply, true);
-	if (ret) {
-		puts("Error enabling VMMC supply\n");
-		return ret;
+	ret = device_get_supply_regulator(mmc->dev, "vqmmc-supply",
+					  &mmc->vqmmc_supply);
+	if (ret)
+		debug("%s: No vqmmc supply\n", mmc->dev->name);
+
+	if (mmc->vmmc_supply) {
+		ret = regulator_set_enable(mmc->vmmc_supply, true);
+		if (ret) {
+			puts("Error enabling VMMC supply\n");
+			return ret;
+		}
 	}
 #endif
 #else /* !CONFIG_DM_MMC */
diff --git a/include/mmc.h b/include/mmc.h
index 010ebe0..188dc74 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -457,6 +457,10 @@ struct mmc {
 	int ddr_mode;
 #if CONFIG_IS_ENABLED(DM_MMC)
 	struct udevice *dev;	/* Device for this MMC controller */
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+	struct udevice *vmmc_supply;	/* Main voltage regulator (Vcc)*/
+	struct udevice *vqmmc_supply;	/* IO voltage regulator (Vccq)*/
+#endif
 #endif
 };
 
-- 
1.9.1