[U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line
Simon Glass
sjg at chromium.org
Sat Sep 9 04:55:11 UTC 2017
On 5 September 2017 at 12:24, Moritz Fischer <moritz.fischer at ettus.com> wrote:
> This commit adds support for GPIO reset lines matching the
> common linux "reset-gpios" devicetree binding.
>
> Signed-off-by: Moritz Fischer <moritz.fischer at ettus.com>
> Cc: Heiko Schocher <hs at denx.de>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Marek BehĂșn <marek.behun at nic.cz>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Michal Simek <monstr at monstr.eu>
>
> ---
> drivers/i2c/muxes/pca954x.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c
> index 383f72f552..dd28ff057b 100644
> --- a/drivers/i2c/muxes/pca954x.c
> +++ b/drivers/i2c/muxes/pca954x.c
> @@ -1,5 +1,6 @@
> /*
> * Copyright (C) 2015 - 2016 Xilinx, Inc.
> + * Copyright (C) 2017 National Instruments Corp
> * Written by Michal Simek
> *
> * SPDX-License-Identifier: GPL-2.0+
> @@ -9,7 +10,10 @@
> #include <dm.h>
> #include <errno.h>
> #include <i2c.h>
> -#include <asm/gpio.h>
> +
> +#if CONFIG_DM_GPIO
> +# include <asm-generic/gpio.h>
> +#endif /* CONFIG_DM_GPIO */
Can we drop the #ifdef?
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -30,6 +34,9 @@ struct chip_desc {
> struct pca954x_priv {
> u32 addr; /* I2C mux address */
> u32 width; /* I2C mux width - number of busses */
> +#ifdef CONFIG_DM_GPIO
> + struct gpio_desc gpio_mux_reset;
> +#endif /* CONFIG_DM_GPIO */
> };
>
> static const struct chip_desc chips[] = {
> @@ -105,10 +112,45 @@ static int pca954x_ofdata_to_platdata(struct udevice *dev)
> return 0;
> }
>
> +static int pca954x_probe(struct udevice *dev)
> +{
> +#ifdef CONFIG_DM_GPIO
Can we use if (IS_ENABLED(CONFIG_DM_GPIO)) ?
> + struct pca954x_priv *priv = dev_get_priv(dev);
> + int err;
> +
> + err = gpio_request_by_name(dev, "reset-gpios", 0,
> + &priv->gpio_mux_reset, GPIOD_IS_OUT);
> +
> + /* it's optional so only bail if we get a real error */
> + if (err && (err != -ENOENT))
> + return err;
> +
> + /* dm will take care of polarity */
> + if (dm_gpio_is_valid(&priv->gpio_mux_reset))
> + dm_gpio_set_value(&priv->gpio_mux_reset, 0);
> +
> +#endif /* CONFIG_DM_GPIO */
> + return 0;
> +}
> +
> +static int pca954x_remove(struct udevice *dev)
> +{
> +#ifdef CONFIG_DM_GPIO
> + struct pca954x_priv *priv = dev_get_priv(dev);
> +
> + if (dm_gpio_is_valid(&priv->gpio_mux_reset))
> + dm_gpio_free(dev, &priv->gpio_mux_reset);
> +
> +#endif /* CONFIG_DM_GPIO */
> + return 0;
> +}
> +
> U_BOOT_DRIVER(pca954x) = {
> .name = "pca954x",
> .id = UCLASS_I2C_MUX,
> .of_match = pca954x_ids,
> + .probe = pca954x_probe,
> + .remove = pca954x_remove,
> .ops = &pca954x_ops,
> .ofdata_to_platdata = pca954x_ofdata_to_platdata,
> .priv_auto_alloc_size = sizeof(struct pca954x_priv),
> --
> 2.14.1
>
More information about the U-Boot
mailing list