[U-Boot] [PATCH 074/080] strider, hrcon: Reset CAT phy on CON2 module

[Mario Six]

From: Dirk Eibach <dirk.eibach at gdsys.cc>

The phy on the CON2 module needs a defined reset pulse of at least 10 ms
to work reliably.

Signed-off-by: Dirk Eibach <dirk.eibach at gdsys.cc>
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
 board/gdsys/mpc8308/hrcon.c   | 30 ++++++++++++++++++++++++++++++
 board/gdsys/mpc8308/strider.c | 24 ++++++++++++++++++++++++
 2 files changed, 54 insertions(+)

diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c
index b3017de911..b03328278e 100644
--- a/board/gdsys/mpc8308/hrcon.c
+++ b/board/gdsys/mpc8308/hrcon.c
@@ -58,6 +58,26 @@ struct {
 	u8 addr;
 } hrcon_fans[] = CONFIG_HRCON_FANS;
 
+#ifdef CONFIG_HRCON_DH
+struct {
+	u8 bus;
+	u8 addr;
+	u16 mask;
+} rgmii2_reset[] = { { 0, 0x23, 0x0100},
+		     {10, 0x23, 0x0100},
+		     {11, 0x23, 0x0100},
+		     {12, 0x23, 0x0100} };
+#else
+struct {
+	u8 bus;
+	u8 addr;
+	u16 mask;
+} rgmii2_reset[] = { {0, 0x23, 0x0100},
+		     {6, 0x23, 0x0100},
+		     {7, 0x23, 0x0100},
+		     {8, 0x23, 0x0100} };
+#endif
+
 int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
 {
 	int res;
@@ -160,6 +180,16 @@ int last_stage_init(void)
 				MCFPGA_RESET_N);
 	}
 
+	if (hw_type_cat && ch0_rgmii2_present) {
+		i2c_set_bus_num(rgmii2_reset[0].bus);
+		pca953x_set_val(rgmii2_reset[0].addr, rgmii2_reset[0].mask, 0);
+		pca953x_set_dir(rgmii2_reset[0].addr, rgmii2_reset[0].mask, 0);
+		mdelay(10);
+		pca953x_set_dir(rgmii2_reset[0].addr, rgmii2_reset[0].mask,
+				rgmii2_reset[0].mask);
+		i2c_set_bus_num(0);
+	}
+
 	if (hw_type_cat) {
 		uint mux_ch;
 		int retval;
diff --git a/board/gdsys/mpc8308/strider.c b/board/gdsys/mpc8308/strider.c
index 3ee5a4889d..c3f9c9a535 100644
--- a/board/gdsys/mpc8308/strider.c
+++ b/board/gdsys/mpc8308/strider.c
@@ -61,6 +61,17 @@ struct {
 	u8 addr;
 } strider_fans[] = CONFIG_STRIDER_FANS;
 
+#if defined(CONFIG_STRIDER_CON) || defined(CONFIG_STRIDER_CON_DP)
+struct {
+	u8 bus;
+	u8 addr;
+	u16 mask;
+} sgmii2_reset[] = { { 0, 0x23, 0x0100},
+		     {10, 0x23, 0x0100},
+		     {11, 0x23, 0x0100},
+		     {12, 0x23, 0x0100} };
+#endif
+
 int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
 {
 	int res;
@@ -178,6 +189,18 @@ int last_stage_init(void)
 				MCFPGA_RESET_N);
 	}
 
+#if defined(CONFIG_STRIDER_CON) || defined(CONFIG_STRIDER_CON_DP)
+	if (hw_type_cat && ch0_sgmii2_present) {
+		i2c_set_bus_num(sgmii2_reset[0].bus);
+		pca953x_set_val(sgmii2_reset[0].addr, sgmii2_reset[0].mask, 0);
+		pca953x_set_dir(sgmii2_reset[0].addr, sgmii2_reset[0].mask, 0);
+		mdelay(10);
+		pca953x_set_dir(sgmii2_reset[0].addr, sgmii2_reset[0].mask,
+				sgmii2_reset[0].mask);
+		i2c_set_bus_num(0);
+	}
+#endif
+
 	if (hw_type_cat) {
 		int retval;
 		struct mii_dev *mdiodev = mdio_alloc();
@@ -261,6 +284,7 @@ int last_stage_init(void)
 		ch7301_probe(k, false);
 		dp501_probe(k, false);
 #endif
+
 		if (hw_type_cat) {
 			int retval;
 			struct mii_dev *mdiodev = mdio_alloc();
-- 
2.11.0