[U-Boot] [PATCH V4] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig

Adam Ford aford173 at gmail.com
Fri Sep 1 23:57:40 UTC 2017 

This converts the following to Kconfig:
   CONFIG_NAND_OMAP_GPMC
   CONFIG_NAND_OMAP_GPMC_PREFETCH
   CONFIG_NAND_OMAP_ELM
   CONFIG_SPL_NAND_AM33XX_BCH
   CONFIG_SPL_NAND_SIMPLE (ARCH_OMAP2PLUS only)

Signed-off-by: Adam Ford <aford173 at gmail.com>
---
V4: Fix missing data from V2-V3
V3: Remove selection from CMD_NAND
V2: Rebased on latest Master
    Fixed a few missing entries where some features lacked dependancies

 arch/arm/mach-omap2/Kconfig            | 18 +++++++++++++
 configs/am335x_baltos_defconfig        |  2 +-
 configs/am335x_evm_defconfig           |  1 +
 configs/am335x_evm_nor_defconfig       |  1 +
 configs/am335x_evm_usbspl_defconfig    |  1 +
 configs/am335x_hs_evm_defconfig        |  1 +
 configs/am3517_crane_defconfig         |  2 ++
 configs/am3517_evm_defconfig           |  1 +
 configs/chiliboard_defconfig           |  2 +-
 configs/cm_t3517_defconfig             |  1 +
 configs/cm_t35_defconfig               |  1 +
 configs/eco5pk_defconfig               |  1 +
 configs/mcx_defconfig                  |  1 +
 configs/mt_ventoux_defconfig           |  1 +
 configs/omap3_evm_defconfig            |  1 +
 configs/omap3_ha_defconfig             |  2 ++
 configs/tao3530_defconfig              |  2 ++
 configs/ti816x_evm_defconfig           |  1 +
 configs/tricorder_defconfig            |  1 +
 configs/tricorder_flash_defconfig      |  1 +
 configs/twister_defconfig              |  1 +
 drivers/mtd/nand/Kconfig               | 47 +++++++++++++++++++++++++++++++++-
 include/configs/am335x_evm.h           |  6 -----
 include/configs/am335x_igep003x.h      |  1 -
 include/configs/am3517_crane.h         |  2 --
 include/configs/am3517_evm.h           |  3 ---
 include/configs/am43xx_evm.h           |  5 ----
 include/configs/baltos.h               |  3 ---
 include/configs/bav335x.h              |  5 ----
 include/configs/brppt1.h               |  3 ---
 include/configs/chiliboard.h           |  6 -----
 include/configs/cm_t35.h               |  2 --
 include/configs/cm_t3517.h             |  1 -
 include/configs/cm_t43.h               |  1 -
 include/configs/dra7xx_evm.h           |  5 ----
 include/configs/mcx.h                  |  2 --
 include/configs/omap3_beagle.h         |  1 -
 include/configs/omap3_cairo.h          |  1 -
 include/configs/omap3_evm.h            |  1 -
 include/configs/omap3_igep00x0.h       |  1 -
 include/configs/omap3_logic.h          |  2 --
 include/configs/pengwyn.h              |  2 --
 include/configs/siemens-am33x-common.h |  3 ---
 include/configs/tam3517-common.h       |  3 ---
 include/configs/tao3530.h              |  2 --
 include/configs/ti816x_evm.h           |  4 ---
 include/configs/ti_am335x_common.h     |  4 ---
 include/configs/ti_armv7_omap.h        |  1 -
 include/configs/ti_omap3_common.h      |  1 -
 include/configs/ti_omap4_common.h      |  4 ---
 include/configs/ti_omap5_common.h      |  4 ---
 include/configs/tricorder.h            |  2 --
 scripts/config_whitelist.txt           |  4 ---
 53 files changed, 87 insertions(+), 88 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 72832ad..15e8d54 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,6 +11,7 @@ config OMAP34XX
 	select ARM_ERRATA_621766
 	select ARM_ERRATA_725233
 	select USE_TINY_PRINTF
+	imply NAND_OMAP_GPMC
 	imply SPL_EXT_SUPPORT
 	imply SPL_FAT_SUPPORT
 	imply SPL_GPIO_SUPPORT
@@ -19,6 +20,7 @@ config OMAP34XX
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_SIMPLE
 	imply SPL_NAND_SUPPORT
 	imply SPL_POWER_SUPPORT
 	imply SPL_SERIAL_SUPPORT
@@ -29,6 +31,8 @@ config OMAP34XX
 config OMAP44XX
 	bool "OMAP44XX SoC"
 	select USE_TINY_PRINTF
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
 	imply SPL_DISPLAY_PRINT
 	imply SPL_EXT_SUPPORT
 	imply SPL_FAT_SUPPORT
@@ -38,6 +42,7 @@ config OMAP44XX
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_AM33XX_BCH
 	imply SPL_NAND_SUPPORT
 	imply SPL_POWER_SUPPORT
 	imply SPL_SERIAL_SUPPORT
@@ -48,6 +53,8 @@ config OMAP54XX
 	bool "OMAP54XX SoC"
 	select ARM_ERRATA_798870
 	select SYS_THUMB_BUILD
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
 	imply SPL_DISPLAY_PRINT
 	imply SPL_ENV_SUPPORT
 	imply SPL_EXT_SUPPORT
@@ -58,6 +65,7 @@ config OMAP54XX
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
+	imply SPL_NAND_AM33XX_BCH
 	imply SPL_NAND_SUPPORT
 	imply SPL_POWER_SUPPORT
 	imply SPL_SERIAL_SUPPORT
@@ -72,6 +80,8 @@ config TI814X
 
 config TI816X
 	bool "TI816X SoC"
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
 	help
 	  Support for AM335x SOC from Texas Instruments.
 	  The AM335x high performance SOC features a Cortex-A8
@@ -79,8 +89,12 @@ config TI816X
 
 config AM43XX
 	bool "AM43XX SoC"
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
 	imply SPL_DM
 	imply SPL_DM_SEQ_ALIAS
+	imply SPL_NAND_AM33XX_BCH
+	imply SPL_NAND_SUPPORT
 	imply SPL_OF_CONTROL
 	imply SPL_OF_TRANSLATE
 	imply SPL_SEPARATE_BSS
@@ -96,6 +110,10 @@ config AM43XX
 
 config AM33XX
 	bool "AM33XX SoC"
+	imply NAND_OMAP_ELM
+	imply NAND_OMAP_GPMC
+	imply SPL_NAND_AM33XX_BCH
+	imply SPL_NAND_SUPPORT
 	imply SYS_I2C_OMAP24XX
 	imply SYS_THUMB_BUILD
 	imply USE_TINY_PRINTF
diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
index eb8338f..1f328aa 100644
--- a/configs/am335x_baltos_defconfig
+++ b/configs/am335x_baltos_defconfig
@@ -8,7 +8,6 @@ CONFIG_TARGET_AM335X_BALTOS=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL_FAT_SUPPORT=y
@@ -51,6 +50,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_PHYLIB=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 00c1af4..4c3aacb 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -34,6 +34,7 @@ CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHYLIB=y
diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig
index 9f08edf..f68fbd9 100644
--- a/configs/am335x_evm_nor_defconfig
+++ b/configs/am335x_evm_nor_defconfig
@@ -27,6 +27,7 @@ CONFIG_DFU_RAM=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHYLIB=y
diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig
index 7c35138..e6d83ac 100644
--- a/configs/am335x_evm_usbspl_defconfig
+++ b/configs/am335x_evm_usbspl_defconfig
@@ -31,6 +31,7 @@ CONFIG_DFU_NAND=y
 CONFIG_DFU_RAM=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHYLIB=y
diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
index acdd56b..dab5ba5 100644
--- a/configs/am335x_hs_evm_defconfig
+++ b/configs/am335x_hs_evm_defconfig
@@ -38,6 +38,7 @@ CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHYLIB=y
diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig
index 42260b1..a5e539d 100644
--- a/configs/am3517_crane_defconfig
+++ b/configs/am3517_crane_defconfig
@@ -15,6 +15,8 @@ CONFIG_SYS_PROMPT="AM3517_CRANE # "
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index d03850b..b4fe992 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -37,6 +37,7 @@ CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig
index ea729b0..f74095d 100644
--- a/configs/chiliboard_defconfig
+++ b/configs/chiliboard_defconfig
@@ -7,7 +7,6 @@ CONFIG_TARGET_CHILIBOARD=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL_FAT_SUPPORT=y
@@ -41,6 +40,7 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_PHYLIB=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig
index ba7d813..46b5c1c 100644
--- a/configs/cm_t3517_defconfig
+++ b/configs/cm_t3517_defconfig
@@ -37,6 +37,7 @@ CONFIG_LED_STATUS_STATE=2
 CONFIG_LED_STATUS_BOOT_ENABLE=y
 CONFIG_LED_STATUS_BOOT=0
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig
index 382fc1a..b203752 100644
--- a/configs/cm_t35_defconfig
+++ b/configs/cm_t35_defconfig
@@ -39,6 +39,7 @@ CONFIG_LED_STATUS_STATE=2
 CONFIG_LED_STATUS_BOOT_ENABLE=y
 CONFIG_LED_STATUS_BOOT=0
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig
index ed32930..57fde87 100644
--- a/configs/eco5pk_defconfig
+++ b/configs/eco5pk_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig
index daea7c4..4f234ba 100644
--- a/configs/mcx_defconfig
+++ b/configs/mcx_defconfig
@@ -35,6 +35,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig
index 09580e7..0c52b8d 100644
--- a/configs/mt_ventoux_defconfig
+++ b/configs/mt_ventoux_defconfig
@@ -32,6 +32,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index d9e636a..638d846 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -45,6 +45,7 @@ CONFIG_SPL_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
+CONFIG_NAND=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig
index c31a86d..cc7de5b 100644
--- a/configs/omap3_ha_defconfig
+++ b/configs/omap3_ha_defconfig
@@ -25,6 +25,8 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig
index 0593e9a..d98d2f3 100644
--- a/configs/tao3530_defconfig
+++ b/configs/tao3530_defconfig
@@ -25,6 +25,8 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig
index 4341d8d..fe527d4 100644
--- a/configs/ti816x_evm_defconfig
+++ b/configs/ti816x_evm_defconfig
@@ -43,6 +43,7 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
 # CONFIG_USE_PRIVATE_LIBGCC is not set
diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig
index 16e3011..84b7cf4 100644
--- a/configs/tricorder_defconfig
+++ b/configs/tricorder_defconfig
@@ -35,5 +35,6 @@ CONFIG_LED_STATUS_BIT2=4
 CONFIG_LED_STATUS_STATE2=2
 CONFIG_LED_STATUS_CMD=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig
index 43f1860..ca4b67a 100644
--- a/configs/tricorder_flash_defconfig
+++ b/configs/tricorder_flash_defconfig
@@ -34,5 +34,6 @@ CONFIG_LED_STATUS_BIT2=4
 CONFIG_LED_STATUS_STATE2=2
 CONFIG_LED_STATUS_CMD=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
diff --git a/configs/twister_defconfig b/configs/twister_defconfig
index 7bbf781..c13cea2 100644
--- a/configs/twister_defconfig
+++ b/configs/twister_defconfig
@@ -31,6 +31,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC_PREFETCH=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 85b26d6..52077e2 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -43,6 +43,34 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES
 	  of OOB area before last ECC sector data starts.  This is potentially
 	  used to preserve the bad block marker in the OOB area.
 
+config NAND_OMAP_GPMC
+	bool "Support OMAP GPMC NAND controller"
+	depends on ARCH_OMAP2PLUS
+	help
+	  Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
+	  GPMC controller is used for parallel NAND flash devices, and can
+	  do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
+	  and BCH16 ECC algorithms.
+
+config NAND_OMAP_GPMC_PREFETCH
+	bool "Enable GPMC Prefetch"
+	depends on NAND_OMAP_GPMC
+	help
+	  On OMAP platforms that use the GPMC controller
+	  (CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that
+	  uses the prefetch mode to speed up read operations.
+
+config NAND_OMAP_ELM
+	bool "Enable ELM driver for OMAPxx and AMxx platforms."
+	depends on NAND_OMAP_GPMC && !OMAP34XX
+	help
+	  ELM controller is used for ECC error detection (not ECC calculation)
+	  of BCH4, BCH8 and BCH16 ECC algorithms.
+	  Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
+	  thus such SoC platforms need to depend on software library for ECC error
+	  detection. However ECC calculation on such plaforms would still be
+	  done by GPMC controller.
+
 config NAND_VF610_NFC
 	bool "Support for Freescale NFC for VF610"
 	select SYS_NAND_SELF_INIT
@@ -134,7 +162,7 @@ comment "Generic NAND options"
 # option (mxc_nand, ndfc, omap_gpmc).
 config SYS_NAND_BUSWIDTH_16BIT
 	bool "Use 16-bit NAND interface"
-	depends on NAND_VF610_NFC
+	depends on NAND_VF610_NFC || NAND_OMAP_GPMC
 	help
 	  Indicates that NAND device has 16-bit wide data-bus. In absence of this
 	  config, bus-width of NAND device is assumed to be either 8-bit and later
@@ -175,12 +203,29 @@ config SYS_NAND_U_BOOT_OFFS_REDUND
 	Set the offset from the start of the nand where the redundant u-boot
 	should be loaded from.
 
+config SPL_NAND_AM33XX_BCH
+	bool "Enables SPL-NAND driver which supports ELM based"
+	depends on NAND_OMAP_GPMC && !OMAP34XX
+	default y
+        help
+	  Hardware ECC correction. This is useful for platforms which have ELM
+	  hardware engine and use NAND boot mode.
+	  Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
+	  so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
+          SPL-NAND driver with software ECC correction support.
+
 config SPL_NAND_DENALI
 	bool "Support Denali NAND controller for SPL"
 	help
 	  This is a small implementation of the Denali NAND controller
 	  for use on SPL.
 
+config	SPL_NAND_SIMPLE
+	bool "Use simple SPL NAND driver"
+	depends on !SPL_NAND_AM33XX_BCH
+	help
+	  Support for NAND boot using simple NAND drivers that
+	  expose the cmd_ctrl() interface.
 endif
 
 endif   # if NAND
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 415ce46..66f7a3f 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -202,9 +202,6 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
@@ -232,9 +229,6 @@
 					"-(NAND.file-system)"
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
 /* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
 #endif
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 9b14603..2400eee 100644
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -113,7 +113,6 @@
 #define CONFIG_PHY_SMSC
 
 /* NAND support */
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_ONFI_DETECTION	1
 
 #define CONFIG_MTD_PARTITIONS
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 9bd1606..59a3fbc 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -211,7 +211,6 @@
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_NAND_OMAP_GPMC
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB sector */
@@ -242,7 +241,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 0dd6cea..c8ca9d4 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -103,8 +103,6 @@
 
 /* Board NAND Info. */
 #ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_BCH
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
@@ -290,7 +288,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200000
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index b84f6e3..4ae10bd 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -256,8 +256,6 @@
 					 CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
@@ -299,9 +297,6 @@
 					"-(NAND.file-system)"
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00180000
 /* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00300000 /* kernel offset */
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 185c749..059cf4a 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -242,9 +242,6 @@
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"*/
 
 #ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
index 062c99c..e7770b6 100644
--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -355,8 +355,6 @@ DEFAULT_LINUX_BOOT_ENV \
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS	{ \
 	2, 3, 4, 5, 6, 7, 8, 9, \
@@ -389,9 +387,6 @@ DEFAULT_LINUX_BOOT_ENV \
 #define CONFIG_ENV_OFFSET_REDUND	0x001e0000
 #define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
 /* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
 #endif
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 07a173f..2af575a 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -71,7 +71,6 @@
 #endif /* CONFIG_SPL_OS_BOOT */
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* OMAP4 and later ELM support */
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -184,9 +183,7 @@ MMCARGS
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x8000000
-#define CONFIG_NAND_OMAP_GPMC
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index b7887d9..80d4e49 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -135,9 +135,6 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
@@ -165,9 +162,6 @@
 					"-(NAND.file-system)"
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
 /* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
 
 /* USB configuration */
 #define CONFIG_USB_MUSB_DSPS
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index a94d55f..9853fc0 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -106,7 +106,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
@@ -250,7 +249,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index 3a9fd2a..bef3028 100644
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -109,7 +109,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index bbc455a..7012a95 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -25,7 +25,6 @@
 #endif
 
 /* NAND support */
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 6c0fc35..21da8ab 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -166,8 +166,6 @@
 					 CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
@@ -194,9 +192,6 @@
 					"-(NAND.file-system)"
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
 /* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 7047e3f..76b75ba 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -250,8 +250,6 @@
 
 /* **** PISMO SUPPORT *** */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define SMNAND_ENV_OFFSET		0x180000 /* environment starts here */
 
 /* Redundant Environment */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 8988091..6a2455b 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -75,7 +75,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
 
diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
index 560e500..5bc79b3 100644
--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -57,7 +57,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
 #define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 9930483..922ff67 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -49,7 +49,6 @@
 
 /* NAND */
 #if defined(CONFIG_NAND)
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 #define CONFIG_BCH
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index dc137db..d2b9fc1 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -137,7 +137,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_BCH
 
 /* UBI configuration */
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 67b5562..654f0a5 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -65,8 +65,6 @@
 
 /* Board NAND Info. */
 #ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE /* physical address */
 						  /* to access nand */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index 242a139..570c375 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -113,8 +113,6 @@
 /* SPL */
 
 /* NAND support */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
 
 /* NAND Configuration. */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 4ea3a0b..bb7e691 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -119,7 +119,6 @@
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
-#define CONFIG_SPL_NAND_AM33XX_BCH
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -511,8 +510,6 @@
 					"512k(mtdoops),"	\
 					"-(configuration)"
 
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BASE		(0x08000000)	/* physical address */
 							/* to access nand at */
 							/* CS0 */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 4336251..d3449df 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -130,7 +130,6 @@
  */
 
 /* **** PISMO SUPPORT *** */
-#define CONFIG_NAND_OMAP_GPMC
 #define SMNAND_ENV_OFFSET		0x180000 /* environment starts here */
 
 /* Redundant Environment */
@@ -163,7 +162,6 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_CONSOLE
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */
 
@@ -207,7 +205,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index d47dc8b..1370f7d 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -81,7 +81,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
@@ -231,7 +230,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 1898a82..1da1eb0 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -66,7 +66,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 /* NAND: SPL related configs */
-#define CONFIG_SPL_NAND_AM33XX_BCH
 
 /* NAND: device related configs */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -77,8 +76,6 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
@@ -111,7 +108,6 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
 #define CONFIG_SPL_TEXT_BASE    0x40400000
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index bf44121..66cacdf 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -74,10 +74,6 @@
  * s_init when we have SPL used.
  */
 
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#endif
-
 /* Now bring in the rest of the common code. */
 #include <configs/ti_armv7_omap.h>
 
diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h
index 306f503..da5fc81 100644
--- a/include/configs/ti_armv7_omap.h
+++ b/include/configs/ti_armv7_omap.h
@@ -21,7 +21,6 @@
  * access CS0 at is 0x8000000.
  */
 #ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
 #ifndef CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_NAND_BASE		0x8000000
 #endif
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 938136c..f9a051c 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -64,7 +64,6 @@
 					 (64 << 20))
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SYS_NAND_BASE		0x30000000
 #endif
 
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 018e4c2..8994400 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -142,10 +142,6 @@
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#endif
-
 #ifdef CONFIG_SPL_BUILD
 /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
 #undef CONFIG_SYS_I2C
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 73c1d8f..5391641 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -103,10 +103,6 @@
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#endif
-
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_TIMER
 #endif
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 77f8cbd..62bd73a 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -84,7 +84,6 @@
 						"2m(fdt)," \
 						"-(ubi)"
 
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
@@ -254,7 +253,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4651bb5..67cbbaf 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1578,9 +1578,6 @@ CONFIG_NAND_MXC
 CONFIG_NAND_MXC_V1_1
 CONFIG_NAND_NDFC
 CONFIG_NAND_OMAP_ECCSCHEME
-CONFIG_NAND_OMAP_ELM
-CONFIG_NAND_OMAP_GPMC
-CONFIG_NAND_OMAP_GPMC_PREFETCH
 CONFIG_NAND_OMAP_GPMC_WSCFG
 CONFIG_NAND_SECBOOT
 CONFIG_NAND_SPL
@@ -2210,7 +2207,6 @@ CONFIG_SPL_MMC_LOAD
 CONFIG_SPL_MMC_MINIMAL
 CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
 CONFIG_SPL_MXS_PSWITCH_WAIT
-CONFIG_SPL_NAND_AM33XX_BCH
 CONFIG_SPL_NAND_BASE
 CONFIG_SPL_NAND_BOOT
 CONFIG_SPL_NAND_DRIVERS
-- 
2.7.4

More information about the U-Boot mailing list