[U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support

[Marek Vasut]

Add initial support for setting the vqmmc regulator. Since we do not
support 1V8 modes, set the regulator to 3V3 and enable it.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
Cc: Jaehoon Chung <jh80.chung at samsung.com>
---
 drivers/mmc/uniphier-sd.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c
index 3c52161067..0d1203cb76 100644
--- a/drivers/mmc/uniphier-sd.c
+++ b/drivers/mmc/uniphier-sd.c
@@ -14,6 +14,7 @@
 #include <linux/dma-direction.h>
 #include <linux/io.h>
 #include <linux/sizes.h>
+#include <power/regulator.h>
 #include <asm/unaligned.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -756,6 +757,9 @@ static int uniphier_sd_probe(struct udevice *dev)
 	fdt_addr_t base;
 	struct clk clk;
 	int ret;
+#ifdef CONFIG_DM_REGULATOR
+	struct udevice *vqmmc_dev;
+#endif
 
 	base = devfdt_get_addr(dev);
 	if (base == FDT_ADDR_T_NONE)
@@ -765,6 +769,15 @@ static int uniphier_sd_probe(struct udevice *dev)
 	if (!priv->regbase)
 		return -ENOMEM;
 
+#ifdef CONFIG_DM_REGULATOR
+	ret = device_get_supply_regulator(dev, "vqmmc-supply", &vqmmc_dev);
+	if (!ret) {
+		/* Set the regulator to 3.3V until we support 1.8V modes */
+		regulator_set_value(vqmmc_dev, 3300000);
+		regulator_set_enable(vqmmc_dev, true);
+	}
+#endif
+
 	ret = clk_get_by_index(dev, 0, &clk);
 	if (ret < 0) {
 		dev_err(dev, "failed to get host clock\n");
-- 
2.11.0