[U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci
Simon Glass
sjg at chromium.org
Wed Sep 13 04:27:27 UTC 2017
Hi Adam,
On 12 September 2017 at 21:28, Adam Ford <aford173 at gmail.com> wrote:
> This adds DM compatibility for the davinici GPIO driver.
> Tested on da850-evm.
>
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> ---
> V2: The bank calculation needs to take into account the size of the struct
> Whitespace fixes
>
> arch/arm/mach-davinci/include/mach/gpio.h | 14 +-
> board/davinci/da8xxevm/da850evm.c | 2 +
> configs/da850evm_defconfig | 3 +-
> drivers/gpio/da8xx_gpio.c | 208 +++++++++++++++++++++++++++---
> include/configs/da850evm.h | 1 +
> 5 files changed, 205 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
> index 7da0060..32cae3a 100644
> --- a/arch/arm/mach-davinci/include/mach/gpio.h
> +++ b/arch/arm/mach-davinci/include/mach/gpio.h
> @@ -40,7 +40,7 @@ struct davinci_gpio_bank {
> unsigned int irq_num;
> unsigned int irq_mask;
> unsigned long *in_use;
> - unsigned long base;
> + struct davinci_gpio *base;
> };
>
> #define davinci_gpio_bank01 ((struct davinci_gpio *)DAVINCI_GPIO_BANK01)
> @@ -49,7 +49,9 @@ struct davinci_gpio_bank {
> #define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
> #define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8)
>
> +#ifndef CONFIG_DM_GPIO
> #define gpio_status() gpio_info()
> +#endif
> #define GPIO_NAME_SIZE 20
> #if defined(CONFIG_SOC_DM644X)
> /* GPIO0 to GPIO53, omit the V3.3 volts one */
> @@ -64,4 +66,14 @@ struct davinci_gpio_bank {
>
> void gpio_info(void);
>
> +#ifdef CONFIG_DM_GPIO
> +
> +/* Information about a GPIO bank */
> +struct davinci_gpio_platdata {
> + int bank_index;
> + ulong base; /* address of registers in physical memory */
> + const char *port_name;
> +};
> +#endif
> +
> #endif
> diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
> index 42bc0f4..2a54d0f 100644
> --- a/board/davinci/da8xxevm/da850evm.c
> +++ b/board/davinci/da8xxevm/da850evm.c
> @@ -10,6 +10,7 @@
> */
>
> #include <common.h>
> +#include <dm.h>
> #include <i2c.h>
> #include <net.h>
> #include <netdev.h>
> @@ -24,6 +25,7 @@
> #include <linux/errno.h>
> #include <hwconfig.h>
> #include <asm/mach-types.h>
> +#include <asm/gpio.h>
>
> #ifdef CONFIG_MMC_DAVINCI
> #include <mmc.h>
> diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
> index b966fa7..24507da 100644
> --- a/configs/da850evm_defconfig
> +++ b/configs/da850evm_defconfig
> @@ -20,14 +20,15 @@ CONFIG_HUSH_PARSER=y
> CONFIG_SYS_PROMPT="U-Boot > "
> # CONFIG_CMD_IMLS is not set
> CONFIG_CRC32_VERIFY=y
> +# CONFIG_CMD_EEPROM is not set
> # CONFIG_CMD_FLASH is not set
> -# CONFIG_CMD_GPIO is not set
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_MTDPARTS=y
> CONFIG_CMD_DIAG=y
> CONFIG_OF_CONTROL=y
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_DM=y
> +CONFIG_DM_GPIO=y
> CONFIG_DM_I2C=y
> CONFIG_DM_I2C_COMPAT=y
> CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> diff --git a/drivers/gpio/da8xx_gpio.c b/drivers/gpio/da8xx_gpio.c
> index fa3a394..b64f936 100644
> --- a/drivers/gpio/da8xx_gpio.c
> +++ b/drivers/gpio/da8xx_gpio.c
> @@ -8,16 +8,20 @@
> */
>
> #include <common.h>
> +#include <dm.h>
> +#include <fdtdec.h>
> #include <asm/io.h>
> #include <asm/gpio.h>
> #include <asm/arch/hardware.h>
> #include <asm/arch/davinci_misc.h>
>
> +#ifndef CONFIG_DM_GPIO
> static struct gpio_registry {
> int is_registered;
> char name[GPIO_NAME_SIZE];
> } gpio_registry[MAX_NUM_GPIOS];
>
> +
> #if defined(CONFIG_SOC_DA8XX)
> #define pinmux(x) (&davinci_syscfg_regs->pinmux[x])
>
> @@ -334,42 +338,30 @@ int gpio_free(unsigned gpio)
> /* Do not configure as input or change pin mux here */
> return 0;
> }
> +#endif
>
> -int gpio_direction_input(unsigned gpio)
> +static int _gpio_direction_output(struct davinci_gpio *bank, unsigned gpio, int value)
> {
> - struct davinci_gpio *bank;
> -
> - bank = GPIO_BANK(gpio);
> - setbits_le32(&bank->dir, 1U << GPIO_BIT(gpio));
> + clrbits_le32(&bank->dir, 1U << GPIO_BIT(gpio));
> + gpio_set_value(gpio, value);
> return 0;
> }
>
> -int gpio_direction_output(unsigned gpio, int value)
> +static int _gpio_direction_input(struct davinci_gpio *bank, unsigned gpio)
> {
> - struct davinci_gpio *bank;
> -
> - bank = GPIO_BANK(gpio);
> - clrbits_le32(&bank->dir, 1U << GPIO_BIT(gpio));
> - gpio_set_value(gpio, value);
> + setbits_le32(&bank->dir, 1U << GPIO_BIT(gpio));
> return 0;
> }
>
> -int gpio_get_value(unsigned gpio)
> +static int _gpio_get_value(struct davinci_gpio *bank, unsigned gpio)
> {
> - struct davinci_gpio *bank;
> unsigned int ip;
> -
> - bank = GPIO_BANK(gpio);
> ip = in_le32(&bank->in_data) & (1U << GPIO_BIT(gpio));
> return ip ? 1 : 0;
> }
>
> -int gpio_set_value(unsigned gpio, int value)
> +static int _gpio_set_value(struct davinci_gpio *bank, unsigned gpio, int value)
> {
> - struct davinci_gpio *bank;
> -
> - bank = GPIO_BANK(gpio);
> -
> if (value)
> bank->set_data = 1U << GPIO_BIT(gpio);
> else
> @@ -378,6 +370,13 @@ int gpio_set_value(unsigned gpio, int value)
> return 0;
> }
>
> +static int _gpio_get_dir(struct davinci_gpio *bank, unsigned gpio)
> +{
> + return in_le32(&bank->dir) & (1U << GPIO_BIT(gpio));
> +}
> +
> +#ifndef CONFIG_DM_GPIO
> +
> void gpio_info(void)
> {
> unsigned gpio, dir, val;
> @@ -385,7 +384,8 @@ void gpio_info(void)
>
> for (gpio = 0; gpio < MAX_NUM_GPIOS; ++gpio) {
> bank = GPIO_BANK(gpio);
> - dir = in_le32(&bank->dir) & (1U << GPIO_BIT(gpio));
> + printf("gpio_info: Bank=%x\n", (int) bank);
> + dir = _gpio_get_dir(bank, gpio);
> val = gpio_get_value(gpio);
>
> printf("% 4d: %s: %d [%c] %s\n",
> @@ -394,3 +394,169 @@ void gpio_info(void)
> gpio_registry[gpio].name);
> }
> }
> +
> +int gpio_direction_input(unsigned gpio)
> +{
> + struct davinci_gpio *bank;
> +
> + bank = GPIO_BANK(gpio);
> + return _gpio_direction_input(bank, gpio);
> +}
> +
> +int gpio_direction_output(unsigned gpio, int value)
> +{
> + struct davinci_gpio *bank;
> +
> + bank = GPIO_BANK(gpio);
> + return _gpio_direction_output(bank, gpio, value);
> +}
> +
> +int gpio_get_value(unsigned gpio)
> +{
> + struct davinci_gpio *bank;
> +
> + bank = GPIO_BANK(gpio);
> + return _gpio_get_value(bank, gpio);
> +}
> +
> +int gpio_set_value(unsigned gpio, int value)
> +{
> + struct davinci_gpio *bank;
> +
> + bank = GPIO_BANK(gpio);
> + return _gpio_set_value(bank, gpio, value);
> +}
> +
> +#else /* CONFIG_DM_GPIO */
> +/* set GPIO pin 'gpio' as an input */
> +
> +static struct davinci_gpio *davinci_get_gpio_bank(struct udevice *dev, unsigned offset)
> +{
> + struct davinci_gpio_bank *bank = dev_get_priv(dev);
> +
> + /* The device tree is not broken into banks but the infrastructure is
> + * expecting it this way, so we'll first include the 0x10 offset, then
> + * calculate the bank manually based on the offset.
> + */
> +
> + return ((struct davinci_gpio *)bank->base) + 0x10 +
> + ((offset >> 5) * sizeof(struct davinci_gpio));
> +}
> +
> +static int davinci_gpio_direction_input(struct udevice *dev, unsigned offset)
> +{
> + struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
> +
> + _gpio_direction_input(base, offset);
> + return 0;
> +}
> +
> +/* set GPIO pin 'gpio' as an output, with polarity 'value' */
> +static int davinci_gpio_direction_output(struct udevice *dev, unsigned offset,
> + int value)
> +{
> + struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
> +
> + _gpio_direction_output(base, offset, value);
> + return 0;
> +}
> +
> +/* read GPIO IN value of pin 'gpio' */
> +static int davinci_gpio_get_value(struct udevice *dev, unsigned offset)
> +{
> + struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
> +
> + return _gpio_get_value(base, offset);
> +}
> +
> +/* write GPIO OUT value to pin 'gpio' */
> +static int davinci_gpio_set_value(struct udevice *dev, unsigned offset,
> + int value)
> +{
> + struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
> +
> + _gpio_set_value(base, offset, value);
> +
> + return 0;
> +}
> +
> +static int davinci_gpio_get_function(struct udevice *dev, unsigned offset)
> +{
> + unsigned int dir;
> + struct davinci_gpio *base = davinci_get_gpio_bank(dev, offset);
> +
> + dir = _gpio_get_dir(base, offset);
> +
> + if (dir)
> + return GPIOF_INPUT;
> +
> + return GPIOF_OUTPUT;
> +}
> +
> +static const struct dm_gpio_ops gpio_davinci_ops = {
> + .direction_input = davinci_gpio_direction_input,
> + .direction_output = davinci_gpio_direction_output,
> + .get_value = davinci_gpio_get_value,
> + .set_value = davinci_gpio_set_value,
> + .get_function = davinci_gpio_get_function,
> +};
> +
> +static int davinci_gpio_probe(struct udevice *dev)
> +{
> + struct davinci_gpio_bank *bank = dev_get_priv(dev);
> + struct davinci_gpio_platdata *plat = dev_get_platdata(dev);
> + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
> + const void *fdt = gd->fdt_blob;
> + int node = dev_of_offset(dev);
> +
> + uc_priv->bank_name = plat->port_name;
> + uc_priv->gpio_count = fdtdec_get_int(fdt, node, "ti,ngpio", -1);
> + bank->base = (struct davinci_gpio *)plat->base;
> + return 0;
> +}
> +
> +static int davinci_gpio_bind(struct udevice *dev)
> +{
> + struct davinci_gpio_platdata *plat = dev->platdata;
> + fdt_addr_t base_addr;
> +
> + if (plat)
> + return 0;
> +
> + base_addr = devfdt_get_addr(dev);
> + if (base_addr == FDT_ADDR_T_NONE)
> + return -ENODEV;
-EINVAL. There is definitely a device.
Also we should not be reading the DT in the bind() method. This should
happen in ofdata_to_platdata()
> +
> + /*
> + * TODO:
> + * When every board is converted to driver model and DT is
> + * supported, this can be done by auto-alloc feature, but
> + * not using calloc to alloc memory for platdata.
I don't really get this because we are in a driver-model method here.
Can we not use the plat data here?
> + */
> + plat = calloc(1, sizeof(*plat));
> + if (!plat)
> + return -ENOMEM;
> +
> + plat->base = base_addr;
> + plat->port_name = fdt_get_name(gd->fdt_blob, dev_of_offset(dev), NULL);
> + dev->platdata = plat;
> +
> + return 0;
> +}
> +
> +static const struct udevice_id davinci_gpio_ids[] = {
> + { .compatible = "ti,dm6441-gpio" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(gpio_davinci) = {
> + .name = "gpio_davinci",
> + .id = UCLASS_GPIO,
> + .ops = &gpio_davinci_ops,
> + .of_match = davinci_gpio_ids,
> + .bind = davinci_gpio_bind,
> + .probe = davinci_gpio_probe,
> + .priv_auto_alloc_size = sizeof(struct davinci_gpio_bank),
> +};
> +
> +#endif
> diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
> index ab2e6ae..ea8c441 100644
> --- a/include/configs/da850evm.h
> +++ b/include/configs/da850evm.h
> @@ -262,6 +262,7 @@
> #define CONFIG_ENV_SECT_SIZE (64 << 10)
> #endif
>
> +#define CONFIG_DA8XX_GPIO
> /*
> * U-Boot general configuration
> */
> --
> 2.7.4
Regards,
Simon
More information about the U-Boot
mailing list