[U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest

[Tom Rini]

On Wed, Sep 13, 2017 at 06:53:17PM -0600, Simon Glass wrote:

> Hi Pantelis,
> 
> On 4 September 2017 at 14:12, Pantelis Antoniou
> <pantelis.antoniou at konsulko.com> wrote:
> > This patchset allows uboot to handle overlays in a manner that uses
> > a base DT blob and an arbitrary number of DT overlays blobs.
> >
> > While it is intended to be used with FIT images since handling a multitude
> > of device tree blobs manually is a chore, manual fdt overlay application
> > is supported and described.
> >
> > Changes since v2:
> > * Addressed review comments by splitting patches and documenting methods.
> > * Patch preserving extra configuration on fit-load
> >
> > The patchset is available at
> >
> >         https://github.com/pantoniou/u-boot/tree/uboot-overlays
> >
> > and is against mainline u-boot as pulled today, 4/9/2017.
> >
> > Franklin S Cooper Jr (1):
> >   doc: overlays: Tweak documentation regarding overlays
> >
> > Pantelis Antoniou (13):
> >   Introduce fdt_setprop_placeholder() method
> >   fdt: Introduce helper method fdt_overlay_apply_verbose()
> >   fdt: Switch to using the verbose overlay application method
> >   fdt: Allow stacked overlays phandle references
> >   fit: Allow multiple images per property
> >   fit: Do not throw away extra configuration on fit_image_load()
> >   fit: Introduce methods for applying overlays on fit-load
> >   fit: fdt overlays doc
> >   doc: Document how to apply fdt overlays
> >   dtbo: make dtbos special
> >   config: sandbox: Add unit tests
> >   ut: fix fdt_getprop_u32() change
> >   test: overlay: Add unit test for stacked overlay
> 
> I applied this series (to u-boot-fdt/testing) but it requires a later
> version of dtc than we use in our travis tests:
> 
> https://travis-ci.org/sglass68/u-boot/jobs/275239527
> 
> Could you please take a look? I don't think I can pull this in until I
> know it can make it to mainline.
> 
> The good news is that with the new dtc my buildman test went through
> with no errors.

OK, please add https://patchwork.ozlabs.org/patch/813888/ into your PR,
make sure it still works (as it should), and then send it along to me.
Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170914/2837e0e2/attachment.sig>