[U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional information to board_add_ram_info()

[Stefan Roese]

On 04.09.2017 07:38, Chris Packham wrote:
> From: Joshua Scott <joshua.scott at alliedtelesis.co.nz>
> 
> Display more information about the current RAM configuration. With these
> changes the output on a 88F6820 board is
> 
>    SoC:   MV88F6820-A0 at 1600 MHz
>    DRAM:  2 GiB (800 MHz, 32-bit, ECC not enabled)
> 
> Signed-off-by: Joshua Scott <joshua.scott at alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <judge.packham at gmail.com>
> ---
> One of the hardware designers at $dayjob expressed a desire to keep
> track of various tweaks to the DDR setup during hardware debugging
> sessions. This is the result.
> 
> I've based this on what is available for the fsl platforms. It might be
> nice to add a few more things but I'm concious of keeping the
> information relevant and succinct.
> 
> Changes in v2:
> - A375 and A38x have 16/32b DDR bus

Applied to u-boot-marvell/master.

Thanks,
Stefan