[U-Boot] [Patch V2 2/4] arm: da850-evm: Enable DM and device tree support for da850-evm

[Adam Ford]

With the device tree ported and DM compatible drivers, enable:
OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL

Signed-off-by: Adam Ford <aford173 at gmail.com>
---
 configs/da850evm_defconfig |  9 +++++++--
 include/configs/da850evm.h | 17 +++++++++++++++--
 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index 0135e7d..652da01 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -6,8 +6,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="da850-evm"
 CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
@@ -34,8 +34,13 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
+CONFIG_DM_SPI=y
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 0736b39..b147bc5 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -21,6 +21,15 @@
 #endif
 
 /*
+* Disable DM_* for SPL build and can be re-enabled after adding
+* DM support in SPL
+*/
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#undef CONFIG_DM_I2C
+#endif
+/*
  * SoC Configuration
  */
 #define CONFIG_MACH_DAVINCI_DA850_EVM
@@ -130,18 +139,23 @@
 /*
  * Serial Driver info
  */
+
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
+#endif
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 
 #define CONFIG_SPI
 #define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
+#endif
 
 #ifdef CONFIG_USE_SPIFLASH
 #define CONFIG_SPL_SPI_LOAD
@@ -152,7 +166,6 @@
 /*
  * I2C Configuration
  */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_DAVINCI
 #define CONFIG_SYS_DAVINCI_I2C_SPEED		25000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
-- 
2.7.4