[U-Boot] [PATCH] spi: fsl_qspi: Copy 16 byte aligned data in TX FIFO

[Jagan Teki]

On Mon, Jun 5, 2017 at 2:37 PM, Suresh Gupta <suresh.gupta at nxp.com> wrote:
> In some of the QSPI controller version, there must be atleast
> 128bit data available in TX FIFO for any pop operation otherwise
> error bit will be set. The code will not make any behavior change
> for previous controller as the transfer data size in ipcr register
> is still the same.
>
> Patch is tested on LS1046A which do not require 16 bytes aligned and
> LS1088A which require 16 bytes aligned data in TX FIFO
>
> Signed-off-by: Suresh Gupta <suresh.gupta at nxp.com>
> Signed-off-by: Anupam Kumar <anupam.kumar_1 at nxp.com>

Applied to u-boot-spi//master

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.