[U-Boot] [PATCH] mtd: cfi: Add support for status register polling

[Stefan Roese]

On 12.09.2017 19:09, Marek Vasut wrote:
> The status register is optional in the AMD command sets, but it's
> presence can be checked by reading out CFI table entry 0xc bit 0.
> If the register is present, prefer using it's bit 7 to determine
> if the flash is busy over reading the flash ; this is needed ie.
> on Hyperflash memories.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>

Applied to u-boot-cfi-flash/master.

Thanks,
Stefan