[U-Boot] [PATCH 1/8] rockchip: rk3128: add device tree file
Kever Yang
kever.yang at rock-chips.com
Wed Sep 27 12:39:22 UTC 2017
Add dts binding header for rk3128, files origin from kernel.
Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3128-evb.dts | 77 ++++
arch/arm/dts/rk3128.dtsi | 756 +++++++++++++++++++++++++++++++++
include/dt-bindings/clock/rk3128-cru.h | 187 ++++++++
4 files changed, 1021 insertions(+)
create mode 100644 arch/arm/dts/rk3128-evb.dts
create mode 100644 arch/arm/dts/rk3128.dtsi
create mode 100644 include/dt-bindings/clock/rk3128-cru.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 762429c..9fc8127 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-sdk.dtb \
+ rk3128-evb.dtb \
rk3188-radxarock.dtb \
rk3288-evb.dtb \
rk3288-fennec.dtb \
diff --git a/arch/arm/dts/rk3128-evb.dts b/arch/arm/dts/rk3128-evb.dts
new file mode 100644
index 0000000..5ef51c9
--- /dev/null
+++ b/arch/arm/dts/rk3128-evb.dts
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "rk3128.dtsi"
+
+/ {
+ model = "Rockchip RK3128 Evaluation board";
+ compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ vcc5v0_otg: vcc5v0-otg-drv {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_otg";
+ gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_host: vcc5v0-host-drv {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ hym8563: hym8563 at 51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+};
+
+&pinctrl {
+ usb_otg {
+ otg_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_host {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm/dts/rk3128.dtsi b/arch/arm/dts/rk3128.dtsi
new file mode 100644
index 0000000..e7710b7
--- /dev/null
+++ b/arch/arm/dts/rk3128.dtsi
@@ -0,0 +1,756 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3128-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3128";
+ rockchip,sram = <&sram>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ spi0 = &spi0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "rockchip,rk3128-smp";
+
+ cpu0:cpu at 0x000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x000>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu1:cpu at 0x001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x001>;
+ };
+
+ cpu2:cpu at 0x002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x002>;
+ };
+
+ cpu3:cpu at 0x003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x003>;
+ };
+ };
+
+ cpu_axi_bus: cpu_axi_bus {
+ compatible = "rockchip,cpu_axi_bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ qos {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ crypto {
+ reg = <0x10128080 0x20>;
+ };
+
+ core {
+ reg = <0x1012a000 0x20>;
+ };
+
+ peri {
+ reg = <0x1012c000 0x20>;
+ };
+
+ gpu {
+ reg = <0x1012d000 0x20>;
+ };
+
+ vpu {
+ reg = <0x1012e000 0x20>;
+ };
+
+ rga {
+ reg = <0x1012f000 0x20>;
+ };
+ ebc {
+ reg = <0x1012f080 0x20>;
+ };
+
+ iep {
+ reg = <0x1012f100 0x20>;
+ };
+
+ lcdc {
+ reg = <0x1012f180 0x20>;
+ rockchip,priority = <3 3>;
+ };
+
+ vip {
+ reg = <0x1012f200 0x20>;
+ rockchip,priority = <3 3>;
+ };
+ };
+
+ msch {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ msch at 10128000 {
+ reg = <0x10128000 0x20>;
+ rockchip,read-latency = <0x3f>;
+ };
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_suspend = <0x84000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ migrate = <0x84000005>;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma: pdma at 20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ arm,pl330-broken-no-flushp;//2
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ xin12m: xin12m {
+ compatible = "fixed-clock";
+ clocks = <&xin24m>;
+ clock-frequency = <12000000>;
+ clock-output-names = "xin12m";
+ #clock-cells = <0>;
+ };
+
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ timer at 20044000 {
+ compatible = "arm,armv7-timer";
+ reg = <0x20044000 0xb8>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,broadcast = <1>;
+ };
+
+ watchdog: wdt at 2004c000 {
+ compatible = "rockchip,watch dog";
+ reg = <0x2004c000 0x100>;
+ clock-names = "pclk_wdt";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,irq = <1>;
+ rockchip,timeout = <60>;
+ rockchip,atboot = <1>;
+ rockchip,debug = <0>;
+ };
+
+ reset: reset at 20000110 {
+ compatible = "rockchip,reset";
+ reg = <0x20000110 0x24>;
+ #reset-cells = <1>;
+ };
+
+ nandc: nandc at 10500000 {
+ compatible = "rockchip,rk-nandc";
+ reg = <0x10500000 0x4000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>;
+ nandc_id = <0>;
+ clocks = <&cru SCLK_NANDC>,
+ <&cru HCLK_NANDC>,
+ <&cru SRST_NANDC>;
+ clock-names = "clk_nandc", "g_clk_nandc", "hclk_nandc";
+ };
+
+ dmc: dmc at 20004000 {
+ u-boot,dm-pre-reloc;
+ compatible = "rockchip,rk3128-dmc", "syscon";
+ reg = <0x0 0x20004000 0x0 0x1000>;
+ };
+
+ cru: clock-controller at 20000000 {
+ u-boot,dm-pre-reloc;
+ compatible = "rockchip,rk3128-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ uart0: serial0 at 20060000 {
+ compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ dmas = <&pdma 2>, <&pdma 3>;
+ #dma-cells = <2>;
+ };
+
+ uart1: serial1 at 20064000 {
+ compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+ reg = <0x20064000 0x100>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ dmas = <&pdma 4>, <&pdma 5>;
+ #dma-cells = <2>;
+ };
+
+ uart2: serial2 at 20068000 {
+ compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+ reg = <0x20068000 0x100>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ dmas = <&pdma 6>, <&pdma 7>;
+ #dma-cells = <2>;
+ };
+
+ pwm0: pwm0 at 20050000 {
+ compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20050000 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ };
+
+ pwm1: pwm1 at 20050010 {
+ compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20050010 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ };
+
+ pwm2: pwm2 at 20050020 {
+ compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20050020 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ };
+
+ pwm3: pwm3 at 20050030 {
+ compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+ reg = <0x20050030 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ };
+
+ sram: sram at 10080400 {
+ compatible = "rockchip,rk3128-smp-sram", "mmio-sram";
+ reg = <0x10080400 0x1C00>;
+ map-exec;
+ map-cacheable;
+ };
+
+ pmu: syscon at 100a0000 {
+ compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
+ reg = <0x100a0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ gic: interrupt-controller at 10139000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ reg = <0x10139000 0x1000>,
+ <0x1013a000 0x1000>,
+ <0x1013c000 0x2000>,
+ <0x1013e000 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ usb_otg: usb at 10180000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2";
+ reg = <0x10180000 0x40000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
+ };
+
+ usb_host: usb at 101c0000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x101c0000 0x40000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG1>;
+ clock-names = "otg";
+ dr_mode = "host";
+ };
+
+ sdmmc: dwmmc at 10214000 {
+ compatible = "rockchip,rk312x-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x10214000 0x4000>;
+ max-frequency = <150000000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc at 1021c000 {
+ compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x1021c000 0x4000>;
+ max-frequency = <150000000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ bus-width = <8>;
+ default-sample-phase = <158>;
+ num-slots = <1>;
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ i2c0: i2c0 at 20070000 {
+ compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+ reg = <0x20070000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ };
+
+ i2c1: i2c1 at 20054000 {
+ compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+ reg = <0x20054000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ };
+
+ i2c2: i2c2 at 20058000 {
+ compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+ reg = <0x20058000 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ };
+
+ i2c3: i2c3 at 2005c000 {
+ compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+ reg = <0x2005c000 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ };
+
+ spi0: spi at 20074000 {
+ compatible = "rockchip,rk3128-spi", "rockchip,rk3288-spi";
+ reg = <0x20074000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>;
+ rockchip,spi-src-clk = <0>;
+ num-cs = <2>;
+ clocks =<&cru SCLK_SPI>, <&cru PCLK_SPI>;
+ clock-names = "spi","pclk_spi0";
+ dmas = <&pdma 8>, <&pdma 9>;
+ #dma-cells = <2>;
+ dma-names = "tx", "rx";
+ };
+
+ grf: syscon at 20008000 {
+ u-boot,dm-pre-reloc;
+ compatible = "rockchip,rk3128-grf", "syscon";
+ reg = <0x20008000 0x1000>;
+ };
+
+ pinctrl: pinctrl at 20008000 {
+ compatible = "rockchip,rk3128-pinctrl";
+ reg = <0x20008000 0xA8>,
+ <0x200080A8 0x4C>,
+ <0x20008118 0x20>,
+ <0x20008100 0x04>;
+ reg-names = "base", "mux", "pull", "drv";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0 at 2007c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2007c000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 at 20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2 at 20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20084000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio2 at 20088000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20088000 0x100>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ emmc {
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_pwren: emmc-pwren {
+ rockchip,pins = <2 5 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+ <1 25 RK_FUNC_2 &pcfg_pull_none>,
+ <1 26 RK_FUNC_2 &pcfg_pull_none>,
+ <1 27 RK_FUNC_2 &pcfg_pull_none>,
+ <1 28 RK_FUNC_2 &pcfg_pull_none>,
+ <1 29 RK_FUNC_2 &pcfg_pull_none>,
+ <1 30 RK_FUNC_2 &pcfg_pull_none>,
+ <1 31 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ nandc{
+ nandc_ale:nandc-ale {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ nandc_cle:nandc-cle {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ nandc_wrn:nandc-wrn {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ nandc_rdn:nandc-rdn {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ nandc_rdy:nandc-rdy {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ nandc_cs0:nandc-cs0 {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ nandc_data: nandc-data {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+ <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+ <2 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <1 RK_PC1 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_wp: sdmmc-wp {
+ rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_pwren: sdmmc-pwren {
+ rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up>,
+ <1 RK_PC3 1 &pcfg_pull_up>,
+ <1 RK_PC4 1 &pcfg_pull_up>,
+ <1 RK_PC5 1 &pcfg_pull_up>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <0 1 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <0 27 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ spi0_txd_mux0:spi0-txd-mux0 {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ spi0_rxd_mux0:spi0-rxd-mux0 {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ spi0_clk_mux0:spi0-clk-mux0 {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ spi0_cs0_mux0:spi0-cs0-mux0 {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ spi0_cs1_mux0:spi0-cs1-mux0 {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ };
+};
diff --git a/include/dt-bindings/clock/rk3128-cru.h b/include/dt-bindings/clock/rk3128-cru.h
new file mode 100644
index 0000000..36c8006
--- /dev/null
+++ b/include/dt-bindings/clock/rk3128-cru.h
@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_GPLL 3
+#define ARMCLK 4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI 65
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_NANDC 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_OTGPHY0 93
+#define SCLK_LCDC 100
+#define SCLK_HDMI 109
+#define SCLK_HEVC 111
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+#define SCLK_PVTM_CORE 123
+#define SCLK_PVTM_GPU 124
+#define SCLK_PVTM_VIDEO 125
+#define SCLK_MAC 151
+#define SCLK_MACREF 152
+#define SCLK_SFC 160
+
+#define DCLK_LCDC 190
+
+/* aclk gates */
+#define ACLK_DMAC2 194
+#define ACLK_LCDC 197
+#define ACLK_VIO 203
+#define ACLK_VCODEC 208
+#define ACLK_CPU 209
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_SPI 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_HDMI 360
+#define PCLK_CPU 362
+#define PCLK_PERI 363
+#define PCLK_DDRUPCTL 364
+#define PCLK_WDT 368
+
+/* hclk gates */
+#define HCLK_OTG0 449
+#define HCLK_OTG1 450
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_I2S 462
+#define HCLK_LCDC 465
+#define HCLK_ROM 467
+#define HCLK_VIO_BUS 472
+#define HCLK_VCODEC 476
+#define HCLK_CPU 477
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE0_DBG 4
+#define SRST_CORE1_DBG 5
+#define SRST_CORE0_POR 8
+#define SRST_CORE1_POR 9
+#define SRST_L2C 12
+#define SRST_TOPDBG 13
+#define SRST_STRC_SYS_A 14
+#define SRST_PD_CORE_NIU 15
+
+#define SRST_TIMER2 16
+#define SRST_CPUSYS_H 17
+#define SRST_AHB2APB_H 19
+#define SRST_TIMER3 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_PERI_NIU 23
+#define SRST_I2S 24
+#define SRST_DDR_PLL 25
+#define SRST_GPU_DLL 26
+#define SRST_TIMER0 27
+#define SRST_TIMER1 28
+#define SRST_CORE_DLL 29
+#define SRST_EFUSE_P 30
+#define SRST_ACODEC_P 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_SFC 47
+
+#define SRST_PWM0 48
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_GRF 55
+#define SRST_PERIPHSYS_A 57
+#define SRST_PERIPHSYS_H 58
+#define SRST_PERIPHSYS_P 59
+#define SRST_CPU_PERI 61
+#define SRST_EMEM_PERI 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMA2 64
+#define SRST_MAC 66
+#define SRST_NANDC 68
+#define SRST_USBOTG0 69
+#define SRST_OTGC0 71
+#define SRST_USBOTG1 72
+#define SRST_OTGC1 74
+#define SRST_DDRMSCH 79
+
+#define SRST_MMC0 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI0 84
+#define SRST_WDT 86
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_BUS_H 99
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_USBPOR 105
+
+#define SRST_VCODEC_A 112
+#define SRST_VCODEC_H 113
+#define SRST_VIO1_A 114
+#define SRST_HEVC 115
+#define SRST_VCODEC_NIU_A 116
+#define SRST_LCDC1_A 117
+#define SRST_LCDC1_H 118
+#define SRST_LCDC1_D 119
+#define SRST_GPU 120
+#define SRST_GPU_NIU_A 122
+
+#define SRST_DBG_P 131
+
+#endif
--
1.9.1
More information about the U-Boot
mailing list