[U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot

[Ran Wang]

Hi Ashish

> -----Original Message-----
> From: Ashish Kumar
> Sent: Thursday, September 14, 2017 12:49 AM
> To: Ran Wang <ran.wang_1 at nxp.com>
> Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Bin Meng
> <bmeng.cn at gmail.com>; prabhakar.khuswaha at nxp.com
> Subject: RE: [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for
> qspi-boot
> 
> Hello Ran,
> 
> Could you please help here to convert to Kconfig option?
> 
> Regards
> Ashish
> 
> -----Original Message-----
> From: Bin Meng [mailto:bmeng.cn at gmail.com]
> Sent: Wednesday, September 13, 2017 2:15 PM
> To: Ashish Kumar <ashish.kumar at nxp.com>
> Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Amrita Kumari
> <amrita.kumari at nxp.com>; prabhakar.khuswaha at nxp.com
> Subject: Re: [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for
> qspi-boot
> 
> On Wed, Sep 13, 2017 at 3:49 PM, Ashish Kumar <Ashish.Kumar at nxp.com>
> wrote:
> > Signed-off-by: Amrita Kumari <amrita.kumari at nxp.com>
> > Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
> > ---
> > v1:
> > Rebased to
> > ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1
> >
> >  configs/ls1088aqds_qspi_defconfig | 8 ++++++++
> >  include/configs/ls1088aqds.h      | 5 +++++
> >  2 files changed, 13 insertions(+)
> >
> > diff --git a/configs/ls1088aqds_qspi_defconfig
> > b/configs/ls1088aqds_qspi_defconfig
> > index 4b0d604..a24a601 100644
> > --- a/configs/ls1088aqds_qspi_defconfig
> > +++ b/configs/ls1088aqds_qspi_defconfig
> > @@ -31,3 +31,11 @@ CONFIG_FSL_DSPI=y
> >  CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
> >  # CONFIG_DISPLAY_BOARDINFO is not set  CONFIG_FSL_LS_PPA=y
> > +CONFIG_USB=y
> > +CONFIG_USB_GADGET=y
> > +CONFIG_CMD_USB=y
> > +CONFIG_DM_USB=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_DWC3=y
> > +CONFIG_USB_DWC3=y
> > +CONFIG_USB_STORAGE=y
> > diff --git a/include/configs/ls1088aqds.h
> > b/include/configs/ls1088aqds.h index 3547b0b..c57e1f5 100644
> > --- a/include/configs/ls1088aqds.h
> > +++ b/include/configs/ls1088aqds.h
> > @@ -363,6 +363,11 @@ unsigned long get_board_ddr_clk(void);
> >         "mcmemsize=0x70000000 \0"
> >  #endif
> >
> > +/*  USB  */
> > +#define CONFIG_HAS_FSL_XHCI_USB
> > +#define CONFIG_USB_XHCI_FSL
> 
> Please convert this as a Kconfig option.
> 
> > +#define CONFIG_USB_MAX_CONTROLLER_COUNT                2
> 
> CONFIG_USB_MAX_CONTROLLER_COUNT is not used anywhere in DM USB.
> Please remove.

Sure, so I need to continue your patchwork or submit it as a new one after yours applied?
BR
Ran
> 
> > +
> >  #ifdef CONFIG_FSL_MC_ENET
> >  #define CONFIG_FSL_MEMAC
> >  #define        CONFIG_PHYLIB
> > --
> 
> Regards,
> Bin