[U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active

[Stefano Babic]

On 13/09/2017 23:29, Stefan Agner wrote:
> From: Stefan Agner <stefan.agner at toradex.com>
> 
> This macro allows to detect whether the USB PHY is active. This
> is helpful to detect if the boot ROM has previously started the
> USB serial downloader.
> 
> The idea is taken from the mfgtool support in the NXP U-Boot:
> http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/commit/?h=imx_v2016.03_4.1.15_2.0.0_ga&id=a352ed3c5184b95c4c9f7468f5fbb5f43de5e412
> 
> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Tested-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================