[U-Boot] [PATCH v1 6/6] serial: stm32x7: remove useless CONFIG_CLK and OF_CONTROL flag

[patrice.chotard at st.com]

From: Patrice Chotard <patrice.chotard at st.com>

This driver is currently used by STM32F7 and STM32H7 SoCs.
As CONFIG_CLK and OF_CONTROL flags are set by default for these
2 SoCs, this flag becomes useless in this driver, so remove it.

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
 drivers/serial/serial_stm32x7.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/serial/serial_stm32x7.c b/drivers/serial/serial_stm32x7.c
index 44e8b42..a5d529c 100644
--- a/drivers/serial/serial_stm32x7.c
+++ b/drivers/serial/serial_stm32x7.c
@@ -83,7 +83,9 @@ static int stm32_serial_pending(struct udevice *dev, bool input)
 static int stm32_serial_probe(struct udevice *dev)
 {
 	struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+	struct clk clk;
 	fdt_addr_t base = plat->base;
+	int ret;
 	bool stm32f4;
 	u8 uart_enable_bit;
 
@@ -91,10 +93,6 @@ static int stm32_serial_probe(struct udevice *dev)
 	stm32f4 = plat->uart_info->stm32f4;
 	uart_enable_bit = plat->uart_info->uart_enable_bit;
 
-#ifdef CONFIG_CLK
-	int ret;
-	struct clk clk;
-
 	ret = clk_get_by_index(dev, 0, &clk);
 	if (ret < 0)
 		return ret;
@@ -104,7 +102,6 @@ static int stm32_serial_probe(struct udevice *dev)
 		dev_err(dev, "failed to enable clock\n");
 		return ret;
 	}
-#endif
 
 	plat->clock_rate = clk_get_rate(&clk);
 	if (plat->clock_rate < 0) {
@@ -125,7 +122,6 @@ static int stm32_serial_probe(struct udevice *dev)
 	return 0;
 }
 
-#if CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct udevice_id stm32_serial_id[] = {
 	{ .compatible = "st,stm32-uart", .data = (ulong)&stm32f4_info},
 	{ .compatible = "st,stm32f7-uart", .data = (ulong)&stm32f7_info},
@@ -143,7 +139,6 @@ static int stm32_serial_ofdata_to_platdata(struct udevice *dev)
 
 	return 0;
 }
-#endif
 
 static const struct dm_serial_ops stm32_serial_ops = {
 	.putc = stm32_serial_putc,
-- 
1.9.1