[U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC

[Priyanka Jain]

As per current implementation, default value of board env is
based on board filename i.e ls2080ardb.

With distro support changes, this env is used to decide upon
kernel dtb which is different for other SoCs (ls2088a, ls2081a)
combination supported with this board.

Add support to modify board env at runtime based on SoC type

Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
Changes for v2:
  Replace setenv() with env_set()

 board/freescale/ls2080ardb/ls2080ardb.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 07ba026..dba0988 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -247,6 +247,8 @@ int misc_init_r(void)
 	char *env_hwconfig;
 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
 	u32 val;
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 svr = gur_in32(&gur->svr);
 
 	val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
 
@@ -274,6 +276,16 @@ int misc_init_r(void)
 
 	if (adjust_vdd(0))
 		printf("Warning: Adjusting core voltage failed.\n");
+	/*
+	 * Default value of board env is based on filename which is
+	 * ls2080ardb. Modify board env for other supported SoCs
+	 */
+	if ((SVR_SOC_VER(svr) == SVR_LS2088A) ||
+	    (SVR_SOC_VER(svr) == SVR_LS2048A))
+		setenv("board", "ls2088ardb");
+	else if ((SVR_SOC_VER(svr) == SVR_LS2081A) ||
+	    (SVR_SOC_VER(svr) == SVR_LS2041A))
+		setenv("board", "ls2081ardb");
 
 	return 0;
 }
-- 
1.7.4.1