[U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot
Chee, Tien Fong
tien.fong.chee at intel.com
Wed Sep 27 03:14:17 UTC 2017
On Sel, 2017-09-26 at 12:38 +0200, Marek Vasut wrote:
> On 09/26/2017 06:31 AM, Chee, Tien Fong wrote:
> >
> > On Isn, 2017-09-25 at 11:24 +0200, Marek Vasut wrote:
> > >
> > > On 09/25/2017 10:40 AM, tien.fong.chee at intel.com wrote:
> > > >
> > > >
> > > > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > > >
> > > > Enable SPL loading U-boot from SDMMC to DDR and booting U-boot.
> > > This patch seems to be doing more than just one thing ...
> > >
> > I can split into two patches:
> > 1) Enable DDR up by configuring FPGA so SPL able loading U-boot to
> > DDR
> > 2) Setting up configs so SPL can boot U-boot from FAT.
> Split it so that one patch does one thing.
>
Okay.
> >
> > >
> > > >
> > > >
> > > > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > ---
> > > > arch/arm/mach-socfpga/spl.c | 55
> > > > +++++++++++++++++++++++++++++++++++++
> > > > common/spl/spl_mmc.c | 2 +-
> > > > configs/socfpga_arria10_defconfig | 57
> > > > ++++++++++++++++++++++++++++++++++-----
> > > > include/spl.h | 2 ++
> > > > 4 files changed, 108 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-
> > > > socfpga/spl.c
> > > > index aba116d..9b381bb 100644
> > > > --- a/arch/arm/mach-socfpga/spl.c
> > > > +++ b/arch/arm/mach-socfpga/spl.c
> > > > @@ -15,6 +15,7 @@
> > > > #include <asm/arch/system_manager.h>
> > > > #include <asm/arch/freeze_controller.h>
> > > > #include <asm/arch/clock_manager.h>
> > > > +#include <asm/arch/fpga_manager.h>
> > > > #include <asm/arch/misc.h>
> > > > #include <asm/arch/scan_manager.h>
> > > > #include <asm/arch/sdram.h>
> > > > @@ -22,6 +23,10 @@
> > > > #include <asm/arch/nic301.h>
> > > > #include <asm/sections.h>
> > > > #include <fdtdec.h>
> > > > +#include <fat.h>
> > > > +#include <fs.h>
> > > > +#include <linux/ctype.h>
> > > > +#include <mmc.h>
> > > > #include <watchdog.h>
> > > > #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > > > #include <asm/arch/pinmux.h>
> > > > @@ -29,6 +34,9 @@
> > > >
> > > > DECLARE_GLOBAL_DATA_PTR;
> > > >
> > > > +#define BSIZE 4096
> > > > +#define PERIPH_RBF 0
> > > > +
> > > > #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > > > static struct pl310_regs *const pl310 =
> > > > (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
> > > > @@ -197,6 +205,12 @@ void board_init_f(ulong dummy)
> > > > #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > > > void spl_board_init(void)
> > > > {
> > > > + int rval = 0;
> > > > + int len = 0;
> > > > + u32 buffer[BSIZE] __aligned(ARCH_DMA_MINALIGN);
> > > > + struct spl_boot_device bootdev;
> > > > + fpga_fs_info fpga_fsinfo;
> > > > +
> > > > /* configuring the clock based on handoff */
> > > > cm_basic_init(gd->fdt_blob);
> > > > WATCHDOG_RESET();
> > > > @@ -214,6 +228,47 @@ void spl_board_init(void)
> > > >
> > > > /* Add device descriptor to FPGA device table */
> > > > socfpga_fpga_add();
> > > > +
> > > > + bootdev.boot_device = spl_boot_device();
> > > > +
> > > > + if (BOOT_DEVICE_MMC1 == bootdev.boot_device) {
> > > > + struct mmc *mmc = NULL;
> > > > + int err = 0;
> > > > +
> > > > + spl_mmc_find_device(&mmc,
> > > > bootdev.boot_device);
> > > > +
> > > > + err = mmc_init(mmc);
> > > > +
> > > > + if (err) {
> > > > +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
> > > > + printf("spl: mmc init failed with
> > > > error:
> > > > %d\n", err);
> > > > +#endif
> > > > + }
> > > > +
> > > > + fpga_fsinfo.dev_part = (char
> > > > *)get_cff_devpart(gd-
> > > > >
> > > > > fdt_blob,
> > > > +
> > > > &
> > > > len);
> > > > +
> > > > + fpga_fsinfo.filename = (char
> > > > *)get_cff_filename(gd->fdt_blob,
> > > > +
> > > > &
> > > > len,
> > > > +
> > > > PE
> > > > RIPH_RBF);
> > > > +
> > > > + fpga_fsinfo.interface = "mmc";
> > > > +
> > > > + fpga_fsinfo.fstype = FS_TYPE_FAT;
> > > > + } else {
> > > > + printf("Invalid boot device!\n");
> > > > + return;
> > > > + }
> > > > +
> > > > + /* Program peripheral RBF */
> > > > + if (fpga_fsinfo.filename && fpga_fsinfo.dev_part &&
> > > > (len >
> > > > 0))
> > > > + rval = fpga_fsload(0, buffer, BSIZE,
> > > > &fpga_fsinfo);
> > > > +
> > > > + if (rval > 0) {
> > > > + config_pins(gd->fdt_blob, "shared");
> > > > +
> > > > + ddr_calibration_sequence();
> > > > + }
> > > > }
> > > >
> > > > void board_init_f(ulong dummy)
> > > > diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
> > > > index b2cccc6..159443f 100644
> > > > --- a/common/spl/spl_mmc.c
> > > > +++ b/common/spl/spl_mmc.c
> > > > @@ -113,7 +113,7 @@ static int spl_mmc_get_device_index(u32
> > > > boot_device)
> > > > return -ENODEV;
> > > > }
> > > >
> > > > -static int spl_mmc_find_device(struct mmc **mmcp, u32
> > > > boot_device)
> > > > +int spl_mmc_find_device(struct mmc **mmcp, u32 boot_device)
> > > > {
> > > > #if CONFIG_IS_ENABLED(DM_MMC)
> > > > struct udevice *dev;
> > > > diff --git a/configs/socfpga_arria10_defconfig
> > > > b/configs/socfpga_arria10_defconfig
> > > > index 4c73d73..2ff9801 100644
> > > > --- a/configs/socfpga_arria10_defconfig
> > > > +++ b/configs/socfpga_arria10_defconfig
> > > > @@ -2,33 +2,76 @@ CONFIG_ARM=y
> > > > CONFIG_ARCH_SOCFPGA=y
> > > > CONFIG_SYS_MALLOC_F_LEN=0x2000
> > > > CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
> > > > +CONFIG_SPL_STACK_R_ADDR=0x00800000
> > > > CONFIG_IDENT_STRING="socfpga_arria10"
> > > > CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
> > > > -CONFIG_USE_BOOTARGS=y
> > > > -CONFIG_BOOTARGS="console=ttyS0,115200"
> > > > CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
> > > > +CONFIG_FIT=y
> > > > +CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> > > > +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
> > > > +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
> > > > +CONFIG_SPL_ENV_SUPPORT=y
> > > > +CONFIG_VERSION_VARIABLE=y
> > > > CONFIG_SPL=y
> > > > +CONFIG_HUSH_PARSER=y
> > > > CONFIG_SPL_FPGA_SUPPORT=y
> > > > +CONFIG_SPL_FAT_SUPPORT=y
> > > > +CONFIG_FS_FAT_MAX_CLUSTSIZE=32768
> > > > CONFIG_CMD_BOOTZ=y
> > > > # CONFIG_CMD_IMLS is not set
> > > > CONFIG_CMD_ASKENV=y
> > > > CONFIG_CMD_GREPENV=y
> > > > # CONFIG_CMD_FLASH is not set
> > > > -CONFIG_CMD_GPIO=y
> > > > +CONFIG_SPL_LIBDISK_SUPPORT=y
> > > > +CONFIG_CMD_PART=y
> > > > CONFIG_CMD_MMC=y
> > > > +CONFIG_CMD_SF=y
> > > > +CONFIG_CMD_SPI=y
> > > > +CONFIG_CMD_I2C=y
> > > > +CONFIG_SYS_I2C_DW=y
> > > > +CONFIG_CMD_USB=y
> > > > +CONFIG_CMD_DFU=y
> > > > +CONFIG_CMD_USB_MASS_STORAGE=y
> > > > +CONFIG_CMD_GPIO=y
> > > > +CONFIG_CMD_MII=y
> > > > CONFIG_CMD_DHCP=y
> > > > CONFIG_CMD_PING=y
> > > > CONFIG_CMD_CACHE=y
> > > > -CONFIG_CMD_EXT4=y
> > > > -CONFIG_CMD_EXT4_WRITE=y
> > > > CONFIG_DOS_PARTITION=y
> > > > -# CONFIG_SPL_DOS_PARTITION is not set
> > > > -CONFIG_ENV_IS_IN_MMC=y
> > > > +CONFIG_SPL_DOS_PARTITION=y
> > > > +CONFIG_SPL_FS_GENERIC=y
> > > > +CONFIG_CMD_FAT=y
> > > > +CONFIG_CMD_FS_GENERIC=y
> > > > CONFIG_SPL_DM=y
> > > > CONFIG_SPL_DM_SEQ_ALIAS=y
> > > > +CONFIG_DFU_MMC=y
> > > > CONFIG_FPGA_SOCFPGA=y
> > > > CONFIG_DM_GPIO=y
> > > > CONFIG_DWAPB_GPIO=y
> > > > CONFIG_DM_MMC=y
> > > > +CONFIG_MMC_DW=y
> > > > +CONFIG_SPI_FLASH=y
> > > > +CONFIG_SPI_FLASH_BAR=y
> > > > +CONFIG_SPI_FLASH_SPANSION=y
> > > > +CONFIG_SPI_FLASH_STMICRO=y
> > > > +CONFIG_DM_ETH=y
> > > > +CONFIG_ETH_DESIGNWARE=y
> > > > CONFIG_SYS_NS16550=y
> > > > CONFIG_USE_TINY_PRINTF=y
> > > > +CONFIG_CMD_FPGA_LOADFS=y
> > > > +CONFIG_CADENCE_QSPI=y
> > > > +CONFIG_DESIGNWARE_SPI=y
> > > > +CONFIG_USB=y
> > > > +CONFIG_DM_USB=y
> > > > +CONFIG_USB_STORAGE=y
> > > > +CONFIG_USB_GADGET=y
> > > > +CONFIG_USB_GADGET_DWC2_OTG=y
> > > > +CONFIG_USB_GADGET_DOWNLOAD=y
> > > > +CONFIG_G_DNL_MANUFACTURER="altera"
> > > > +CONFIG_G_DNL_VENDOR_NUM=0x0525
> > > > +CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
> > > > +CONFIG_USE_TINY_PRINTF=y
> > > > +CONFIG_SPL_MMC_SUPPORT=y
> > > > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> > > > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
> > > > +CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
> > > > diff --git a/include/spl.h b/include/spl.h
> > > > index ce4cf0a..e24433d 100644
> > > > --- a/include/spl.h
> > > > +++ b/include/spl.h
> > > > @@ -10,6 +10,7 @@
> > > > /* Platform-specific defines */
> > > > #include <linux/compiler.h>
> > > > #include <asm/spl.h>
> > > > +#include <mmc.h>
> > > >
> > > > /* Value in r0 indicates we booted from U-Boot */
> > > > #define UBOOT_NOT_LOADED_FROM_SPL 0x13578642
> > > > @@ -68,6 +69,7 @@ int spl_load_simple_fit(struct spl_image_info
> > > > *spl_image,
> > > > void preloader_console_init(void);
> > > > u32 spl_boot_device(void);
> > > > u32 spl_boot_mode(const u32 boot_device);
> > > > +int spl_mmc_find_device(struct mmc **mmcp, u32 boot_device);
> > > >
> > > > /**
> > > > * spl_set_header_raw_uboot() - Set up a standard SPL image
> > > > structure
> > > >
>
More information about the U-Boot
mailing list