[U-Boot] [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig

[Peng Fan]

> -----Original Message-----
> From: Fabio Estevam [mailto:fabio.estevam at nxp.com]
> Sent: Thursday, September 28, 2017 2:01 AM
> To: sbabic at denx.de
> Cc: Peng Fan <peng.fan at nxp.com>; u-boot at lists.denx.de; Fabio Estevam
> <fabio.estevam at nxp.com>
> Subject: [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
> 
> CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so
> fix this by moving it to Kconfig.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> ---
>  configs/mx7ulp_evk_defconfig | 1 +
>  include/configs/mx7ulp_evk.h | 1 -
>  2 files changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig
> index d630113..0470fbd 100644
> --- a/configs/mx7ulp_evk_defconfig
> +++ b/configs/mx7ulp_evk_defconfig
> @@ -4,6 +4,7 @@ CONFIG_TARGET_MX7ULP_EVK=y
> CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
> 
> CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/i
> mximage.cfg"
>  CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
> diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
> index a7992ea..56d74e9 100644
> --- a/include/configs/mx7ulp_evk.h
> +++ b/include/configs/mx7ulp_evk.h
> @@ -90,7 +90,6 @@
>  #define PHYS_SDRAM_SIZE			SZ_1G
>  #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
>  #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
> -#define CONFIG_CMD_BOOTZ
> 
>  #define CONFIG_LOADADDR             0x60800000
> 
> --
> 2.7.4