[U-Boot] [PATCH v5 00/11] sunxi: update H3/H5/A64 EMAC DT nodes
Jagan Teki
jagannadh.teki at gmail.com
Wed Apr 4 08:55:07 UTC 2018
On Wed, Apr 4, 2018 at 12:14 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> On Wed, Apr 4, 2018 at 6:01 AM, Andre Przywara <andre.przywara at arm.com> wrote:
>> This is the first half of the DT update series, just updating the
>> EMAC DT nodes, for which the bindings have diverged.
>> Just fixed some checkpatch warnings and rebased (without conflicts)
>> against v2018.05-rc1.
>> As before, this includes the patches to drop the direct MMC environment
>> for all Allwinner boards, to finally get rid of the image size limitation.
>>
>> Patch 01 leaves some hint in the README how to avoid the situation
>> when overrunning U-Boot's image size on 64-bit boards.
>> The old v2 EMAC DT update series is in patches 02-08, it prepares U-Boot's
>> EMAC driver for using the new DT binding used in Linux, also updates
>> the DTs to the new EMAC DT node already.
>>
>> The final patches lift the space limit we currently have due to the raw
>> MMC environment.
>> Patch 09 disables that for all sunxi boards, to give us finally some
>> space. Patches 10 and 11 consequently revert the disabling of features we
>> saw a few weeks ago to migitate the size problem.
>>
>> Cheers,
>> Andre.
>>
>> Changelog v4 .. v5:
>> - drop Linux DT update patches for now
>> - fix minor checkpatch complaints
>>
>> Changelog v3 .. v4:
>> - remove MMC environment for all Allwinner boards (including 32 bit ones)
>> - keep MMC environment offset to the old values
>> - drop DT adjustments to use fixed MMC regulator
>>
>> Changelog v2 .. v3:
>> 01: added, was on the list before
>> 02: drop redundant H5 line
>> 03-08: unchanged
>> 09-20: added
>>
>> Changelog v1 .. v2:
>> 01, 02, 03: unchanged
>> 04, 05, 06, 07: added
>>
>> Andre Przywara (11):
>> sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted
>> Firmware
>> sunxi: gpio: add missing compatible strings
>> net: sun8i-emac: support new pinctrl DT bindings
>> net: sun8i-emac: add support for new EMAC DT binding
>> arm: dts: sunxi: update A64 to new EMAC binding
>> arm: dts: sunxi: update H3 to new EMAC binding
>> arm: dts: sunxi: update H5 to new EMAC binding
>> net: sun8i-emac: remove support for old binding
>> sunxi: disable direct MMC environment
>> sunxi: revert disabling of features
>> Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"
>
> Reviewed-by: Jagan Teki <jagan at openedev.com>
Applied to u-boot-sunxi/master
More information about the U-Boot
mailing list