April 2018 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Sun Apr 1 01:28:19 UTC 2018
Ending: Mon Apr 30 23:44:50 UTC 2018
Messages: 2777

[U-Boot] i.MX6 PAD_CTL_SPEED_LOW possibly wrong Jonas Mark (BT-FIR/ENG1)
[U-Boot] [PATCH] arm,imx6: fix PAD_CTL_SPEED_LOW constant Jonas Mark (BT-FIR/ENG1)
[U-Boot] [RFC PATCH] imx: add writebcb command Stefan Agner
[U-Boot] [RFC PATCH] cmd_writebcb_mx7: add command to write FCB and DBBT for i.MX 7 Stefan Agner
[U-Boot] [PATCH v3 0/5] mtd: nand: mxs_nand: improve ECC support Stefan Agner
[U-Boot] [PATCH v3 1/5] mtd: nand: mxs_nand: use self init Stefan Agner
[U-Boot] [PATCH v3 2/5] mtd: nand: mxs_nand: allow to enable BBT support Stefan Agner
[U-Boot] [PATCH v3 3/5] mtd: nand: mxs_nand: use structure for BCH geometry Stefan Agner
[U-Boot] [PATCH v3 4/5] mtd: nand: mxs_nand: report correct ECC parameters Stefan Agner
[U-Boot] [PATCH v3 5/5] mtd: nand: mxs_nand: add minimal ECC support Stefan Agner
[U-Boot] [PATCH v1 0/9] mtd: nand: mxs_nand: add device tree support Stefan Agner
[U-Boot] [PATCH v1 1/9] mtd: nand: mxs_nand: move register structs to driver data Stefan Agner
[U-Boot] [PATCH v1 2/9] mtd: nand: mxs_nand: use more precise function name Stefan Agner
[U-Boot] [PATCH v1 3/9] mtd: nand: mxs_nand: separate board/controller init Stefan Agner
[U-Boot] [PATCH v1 4/9] mtd: nand: mxs_nand: add use_minimum_ecc to struct Stefan Agner
[U-Boot] [PATCH v1 5/9] mtd: nand: mxs_nand: create separate header file Stefan Agner
[U-Boot] [PATCH v1 6/9] mtd: nand: mxs_nand: add device tree support Stefan Agner
[U-Boot] [PATCH v1 7/9] mtd: nand: mxs_nand: add support for specific ECC strength Stefan Agner
[U-Boot] [PATCH v1 8/9] arm: dts: imx7: sync with Linux Stefan Agner
[U-Boot] [PATCH v1 9/9] arm: dts: imx7: colibri: add raw NAND support Stefan Agner
[U-Boot] [PATCH v3 5/5] mtd: nand: mxs_nand: add minimal ECC support Stefan Agner
[U-Boot] [PATCH v2 2/3] spi: davinci: Full dm conversion Gajjar Akash
[U-Boot] [U-Boot, 18/36] rockchip: rk3188: remove rockchip timer as sys timer Artturi Alm
[U-Boot] [PATCH 1/1] fw_printenv: Fix crash due to incorrect size for malloc'ed string. Kristian Amlie
[U-Boot] [PATCH 1/1] env/Kconfig: Add descriptions so environment options can be modified. Kristian Amlie
[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver Ang, Chee Hong
[U-Boot] [PATCH v1 2/3] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Ang, Chee Hong
[U-Boot] [PATCH v1 3/3] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration Ang, Chee Hong
[U-Boot] [PATCH v1 2/3] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Ang, Chee Hong
[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver Ang, Chee Hong
[U-Boot] [PATCH v1 2/3] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Ang, Chee Hong
[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver Ang, Chee Hong
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Antony Antony
[U-Boot] [PATCH v2 u-boot 0/2] reset: Add get/assert/deassert/release for bulk of reset signals Neil Armstrong
[U-Boot] [PATCH v2 u-boot 1/2] reset: Add get/assert/deassert/release for bulk of reset signals Neil Armstrong
[U-Boot] [PATCH v2 u-boot 2/2] reset: add sandbox test for bulk API Neil Armstrong
[U-Boot] [PATCH v2 u-boot 0/2] clk: Add get/enable/disable/release for a bulk of clocks Neil Armstrong
[U-Boot] [PATCH v2 u-boot 1/2] clk: Add get/enable/disable/release for a bulk of clocks Neil Armstrong
[U-Boot] [PATCH v2 u-boot 2/2] clk: add sandbox test for bulk API Neil Armstrong
[U-Boot] [PATCH v2 u-boot 2/2] reset: add sandbox test for bulk API Neil Armstrong
[U-Boot] [RFC PATCH] net: phy: Don't limit phy addresses by default Neil Armstrong
[U-Boot] [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs Neil Armstrong
[U-Boot] [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs Neil Armstrong
[U-Boot] [PATCH u-boot 1/2] ARM: meson: rename GXBB to GX Neil Armstrong
[U-Boot] [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs Neil Armstrong
[U-Boot] [PATCH v2 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Neil Armstrong
[U-Boot] [PATCH v2 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Neil Armstrong
[U-Boot] [PATCH v2 u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs Neil Armstrong
[U-Boot] [PATCH v2 u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers Neil Armstrong
[U-Boot] [PATCH 1/1] mmc: avoid division by zero in meson_mmc_config_clock - Please, consider for v2018.05-rc2 Neil Armstrong
[U-Boot] [PATCH v2 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Neil Armstrong
[U-Boot] [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Neil Armstrong
[U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Neil Armstrong
[U-Boot] [PATCH v3 u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs Neil Armstrong
[U-Boot] [PATCH v3 u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers Neil Armstrong
[U-Boot] [PATCH v2 u-boot] ARM: meson: rename GXBB to GX Neil Armstrong
[U-Boot] [PATCH u-boot 0/2] ARM64: meson: Sync DT and Bindings with Linux 4.16 Neil Armstrong
[U-Boot] [PATCH u-boot 1/2] ARM64: meson: Sync DT and Bindings with Linux 4.16 Neil Armstrong
[U-Boot] [PATCH u-boot 2/2] pinctrl: meson: Update pinmux with new Linux bindings Neil Armstrong
[U-Boot] [PATCH] reset: fix bulk API when DM_RESET is disabled Neil Armstrong
[U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Neil Armstrong
[U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Neil Armstrong
[U-Boot] [PATCH] usb: dwc3-of-simple: fix error check of clk_get_bulk when disabled Neil Armstrong
[U-Boot] [PATCH v2 u-boot 1/2] reset: Add get/assert/deassert/release for bulk of reset signals Neil Armstrong
[U-Boot] [PATCH] reset: fix bulk API when DM_RESET is disabled Neil Armstrong
[U-Boot] [PATCH] reset: fix reset_get_bulk when phandle error Neil Armstrong
[U-Boot] [PATCH] clk: fix clk_get_bulk when phandle error Neil Armstrong
[U-Boot] [PATCH 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice Neil Armstrong
[U-Boot] [PATCH] regmap: add regmap_update_bits() helper Neil Armstrong
[U-Boot] [PATCH] cmd: add ADC cli commands Neil Armstrong
[U-Boot] [PATCH u-boot] adc: add Amlogic Meson SAR ADC driver Neil Armstrong
[U-Boot] Fwd: [PATCH 1/1] mmc: avoid division by zero in meson_mmc_config_clock - Please, consider for v2018.05-rc2 Neil Armstrong
[U-Boot] [PATCH] sunxi: Add support for Libre Computer Board ALL-H3-CC H5 ver. Neil Armstrong
[U-Boot] DWC3 USB driver regression Neil Armstrong
[U-Boot] DWC3 USB driver regression Neil Armstrong
[U-Boot] [PATCH] usb: host: dwc3: fix phys init Neil Armstrong
[U-Boot] DWC3 USB driver regression Neil Armstrong
[U-Boot] [PATCH] regmap: add regmap_update_bits() helper Neil Armstrong
[U-Boot] [PATCH v2 0/2] regmap: add regmap_update_bits and sandbox R/W test Neil Armstrong
[U-Boot] [PATCH v2 1/2] regmap: add regmap_update_bits() helper Neil Armstrong
[U-Boot] [PATCH v2 2/2] test: regmap: add read/modify/write test Neil Armstrong
[U-Boot] [PATCH] cmd: add ADC cli commands Neil Armstrong
[U-Boot] [PATCH v2 1/5] regmap: Add size parameter Neil Armstrong
[U-Boot] [PATCH v2] reset: Add generic GPIO reset driver Neil Armstrong
[U-Boot] [PATCH v2] cmd: add ADC cli commands Neil Armstrong
[U-Boot] [Feature] Android Fastboot over Ethernet Stanislas BERTRAND
[U-Boot] [PATCH 0/6] Android A/B Bootloader support Stanislas BERTRAND
[U-Boot] [Feature] Android Fastboot over Ethernet Stanislas BERTRAND
[U-Boot] [PATCH 6/6] cmd: Add "boot_android" command. Stanislas BERTRAND
[U-Boot] [PATCH 6/6] cmd: Add "boot_android" command. Stanislas BERTRAND
[U-Boot] [PATCH] ARM: mx6: ddr: Add write leveling correction code Stefano Babic
[U-Boot] [PATCH] ARM: mx6: ddr: Add write leveling correction code Stefano Babic
[U-Boot] [PATCH 1/2] Makefile: always preserve output for images that can contain HAB Blocks Stefano Babic
[U-Boot] [PATCH 2/2] tools/imximage: use 0x prefix in HAB Blocks line Stefano Babic
[U-Boot] [PATCH] ARM: mx6: ddr: Add write leveling correction code Stefano Babic
[U-Boot] [PATCH v3 1/3] imx: mx7: Fix CONFIG_SERIAL_TAG compilation Stefano Babic
[U-Boot] [PATCH v3 2/3] imx: mx7: Add comment to describe OTP TESTER registers Stefano Babic
[U-Boot] [PATCH v3 3/3] warp7: Set u-boot serial# based on OTP value Stefano Babic
[U-Boot] [PATCH v3 1/2] imximage: Encase majority of header in __ASSEMBLY__ declaration Stefano Babic
[U-Boot] [PATCH v3 2/2] imx: hab: Provide hab_auth_img_or_fail command Stefano Babic
[U-Boot] [PATCH] arm: imx: Add Winbond SPI-NOR support for Advantech DMS-BA16 board Stefano Babic
[U-Boot] [PATCHv2] board: ge: bx50v3: enable backlight on demand Stefano Babic
[U-Boot] [PATCH v2 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Stefano Babic
[U-Boot] [PATCH v2 2/2] boot: script: The boot.scr file for K+P's boards Stefano Babic
[U-Boot] [PATCH] imx: mx7: snvs: Add an SNVS init routine Stefano Babic
[U-Boot] [PATCH] pico-imx7d: Replace fatload command Stefano Babic
[U-Boot] [PATCH] imx: Create distinct pre-processed mkimage config files Stefano Babic
[U-Boot] [PATCH 1/2] imx31_phycore: Delete Stefano Babic
[U-Boot] [PATCH 2/2] mx31ads: Delete Stefano Babic
[U-Boot] [PATCH] mx6cuboxi: Fix some memory configuration errors Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PATCH] Revert "imximage: Remove failure when no IVT offset is found" Stefano Babic
[U-Boot] [PATCH] arm,imx6: fix PAD_CTL_SPEED_LOW constant Stefano Babic
[U-Boot] [PATCH] arm,imx6: fix PAD_CTL_SPEED_LOW constant Stefano Babic
[U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support Stefano Babic
[U-Boot] [PATCH v2 2/7] i.MX6DL: mamoj: Add I2C support Stefano Babic
[U-Boot] [PATCH v2 3/7] i.MX6DL: mamoj: Add PFUZE100 support Stefano Babic
[U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support Stefano Babic
[U-Boot] [PATCH v3 5/5] mtd: nand: mxs_nand: add minimal ECC support Stefano Babic
[U-Boot] [PATCH v4 00/18] warp7: Enable automated OPTEE/HAB boot flow Stefano Babic
[U-Boot] [PATCH] arm,imx6: fix PAD_CTL_SPEED_LOW constant Stefano Babic
[U-Boot] [PATCH v3 1/2] warp7: include/configs: use generic fs commands in CONFIG_EXTRA_ENV_SETTINGS Stefano Babic
[U-Boot] [PATCH v3 2/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC Stefano Babic
[U-Boot] [PATCH] mx7dsabresd: Remove the mx7dsabresd_secure_defconfig target Stefano Babic
[U-Boot] [PATCH] Revert "imximage: Remove failure when no IVT offset is found" Stefano Babic
[U-Boot] [PATCH] eth: dm: fec: Change FEC PHY mask setting from CONFIG_PHYLIB to CONFIG_FEC_MXC_PHYADDR Stefano Babic
[U-Boot] [PATCH v2 1/2] imx6ul: opos6ul: add SPL_DM support Stefano Babic
[U-Boot] [PATCH v2 2/2] imx6ul: opos6ul: in Serial Downloader boot mode use ymodem Stefano Babic
[U-Boot] [PATCH 1/5] ARM: mxs: make lowlevel_init() weak Stefano Babic
[U-Boot] [PATCH 2/5] ARM: arm926ejs: fix lowlevel_init call Stefano Babic
[U-Boot] [PATCH 3/5] ARM: spl: include arm/thumb glue sections Stefano Babic
[U-Boot] [PATCH 4/5] ARM: mxs: move spl data Stefano Babic
[U-Boot] [PATCH 5/5] ARM: mxs: support full SPL framework Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PATCH 1/3] arm: dra76: fastboot: extend cpu type for getvar command Praneeth Bajjuri
[U-Boot] [PATCH 0/2] Boot android with FIT image Praneeth Bajjuri
[U-Boot] [PATCH 1/2] configs: TI: Enable FIT Library overlay support Praneeth Bajjuri
[U-Boot] [PATCH 2/2] env: ti: android: boot with FIT Image Praneeth Bajjuri
[U-Boot] [PATCH 1/3] arm: dra76: fastboot: extend cpu type for getvar command Bajjuri, Praneeth
[U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver Liam Beguin
[U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver Liam Beguin
[U-Boot] [PATCH v1 15/19] spi: mvebu_a3700_spi: Use Armada 37xx clk driver for SPI clock frequency Marek Behún
[U-Boot] [PATCH v2 00/20] More support for Armada 37xx boards (for Turris Mox) Marek Behún
[U-Boot] [PATCH v2 01/20] phy: marvell: a3700: Change return type of macro MVEBU_REG Marek Behún
[U-Boot] [PATCH v2 02/20] phy: marvell: a3700: Use reg_set16 instead of phy_write16 Marek Behún
[U-Boot] [PATCH v2 03/20] phy: marvell: a3700: Don't create functional macro for each register Marek Behún
[U-Boot] [PATCH v2 04/20] phy: marvell: a3700: Use same timeout for all register polling Marek Behún
[U-Boot] [PATCH v2 05/20] phy: marvell: a3700: Use (!ret) instead of (ret == 0) Marek Behún
[U-Boot] [PATCH v2 06/20] phy: marvell: a3700: Use reg_set_indirect istead of 2 reg_sets Marek Behún
[U-Boot] [PATCH v2 07/20] phy: marvell: a3700: Access USB3 register indirectly on lane 2 Marek Behún
[U-Boot] [PATCH v2 08/20] phy: marvell: a3700: Set USB3 RX wait depending on ref clock Marek Behún
[U-Boot] [PATCH v2 09/20] phy: marvell: a3700: revise the USB3 comphy setting during power on Marek Behún
[U-Boot] [PATCH v2 10/20] phy: marvell: mux: Support nontrivial node order in selector register Marek Behún
[U-Boot] [PATCH v2 11/20] phy: marvell: a3700: Fix SGMII cfg and stat register addresses Marek Behún
[U-Boot] [PATCH v2 12/20] phy: marvell: a3700: Use comphy_mux on Armada 37xx. Marek Behún
[U-Boot] [PATCH v2 13/20] phy: marvell: a3700: Save/restore selector reg in SGMII init Marek Behún
[U-Boot] [PATCH v2 14/20] driver: clk: Add support for clocks on Armada 37xx Marek Behún
[U-Boot] [PATCH v2 15/20] spi: mvebu_a3700_spi: Use Armada 37xx clk driver for SPI clock frequency Marek Behún
[U-Boot] [PATCH v2 16/20] clk: armada-37xx: Support soc_clk_dump Marek Behún
[U-Boot] [PATCH v2 17/20] phy: marvell: core: Cosmetic fixes Marek Behún
[U-Boot] [PATCH v2 18/20] net: mvneta: Fix fault when wrong device tree Marek Behún
[U-Boot] [PATCH v2 19/20] watchdog: Add support for Armada 37xx CPU watchdog Marek Behún
[U-Boot] [PATCH v2 20/20] arm64: mvebu: Add basic support for the Turris Mox board Marek Behún
[U-Boot] [PATCH] imx: nitrogen6x: Convert Sabrelite to distro boot support Gary Bisson
[U-Boot] [PATCH] imx: nitrogen6x: Convert Sabrelite to distro boot support Gary Bisson
[U-Boot] [PATCH] imx: nitrogen6x: Convert Sabrelite to distro boot support Gary Bisson
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Gary Bisson
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Gary Bisson
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Gary Bisson
[U-Boot] [PATCH V4 1/2] imx6: Convert sabrelite and nitrogen6x boards to distro boot support Gary Bisson
[U-Boot] [PATCH V5 1/2] imx6: Convert sabrelite and nitrogen6x boards to distro boot support Gary Bisson
[U-Boot] [PATCH V5 2/2] imx6: sabrelite: update defconfig to use distro defaults Gary Bisson
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Jocelyn Bohr
[U-Boot] [PATCH] ubifs: Change value of mutex_is_locked() Bradley Bolen
[U-Boot] [PATCH v2 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [PATCH v2 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Felix Brack
[U-Boot] [PATCH] configs: Fixup some CPSW-related items Felix Brack
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Alexey Brodkin
[U-Boot] [PATCH] ARC: Bump ARC tools used in TravisCI to the most recent release arc-2017.09 Alexey Brodkin
[U-Boot] Please pull ARC changes for 2018.05 Alexey Brodkin
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Alexey Brodkin
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Alexey Brodkin
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Alexey Brodkin
[U-Boot] [PATCH v2 1/2] SPI Flash: add support of sst26wf* flash series Alexey Brodkin
[U-Boot] Please pull ARC fixes for RC3 Alexey Brodkin
[U-Boot] [PATCH v2 2/3] dm: led: auto probe() LEDs with "default-state" Patrick Brünn
[U-Boot] [PATCHv1 02/14] reset: sti: remove request and free functions Patrice CHOTARD
[U-Boot] [PATCHv1 12/14] usb: ehci/ohci: remove reset_free function Patrice CHOTARD
[U-Boot] [PATCH] usb: gadget: composite: fix NULL pointer when a non standard request is received Patrice CHOTARD
[U-Boot] [RESEND][PATCH v1 0/3] Add STM32MP157 regulator driver Patrice CHOTARD
[U-Boot] [RESEND][PATCH v1] phy: add support for STM32 usb phy controller Patrice CHOTARD
[U-Boot] [PATCH] usb: gadget: composite: fix NULL pointer when a non standard request is received Patrice CHOTARD
[U-Boot] [PATCH v2] phy: add support for STM32 usb phy controller Patrice CHOTARD
[U-Boot] Booting Jerry chromebook from eMMC Carlo Caione
[U-Boot] [PATCH v1 0/4] Add STM32MP157 regulator driver Patrice Chotard
[U-Boot] [PATCH v1 1/4] power: regulator: stpmu1: Introduce stpmu1 driver Patrice Chotard
[U-Boot] [PATCH v1 2/4] power: pmic: stpmu1: Add regulator bindings Patrice Chotard
[U-Boot] [PATCH v1 3/4] ARM: dts: stm32mp157c-ed1: Add regulator node Patrice Chotard
[U-Boot] [PATCH v1 4/4] configs: stm32mp15_basic: Set regulator relative flags Patrice Chotard
[U-Boot] [PATCH v1 0/2] Add STM32MP157 SoC Power regulator Patrice Chotard
[U-Boot] [PATCH v1 1/2] stm32mp: regulator: add SoC pwr regulator support Patrice Chotard
[U-Boot] [PATCH v1 2/2] ARM: dts: stm32mp157: Add SoC pwr regulator entry Patrice Chotard
[U-Boot] [PATCH] clk: clk_stm32f: Use PLLSAIP as USB 48MHz clock Patrice Chotard
[U-Boot] [PATCH] serial: Remove duplicated line in Makefile Patrice Chotard
[U-Boot] [PATCH v1 0/2] stm32_serial fixes Patrice Chotard
[U-Boot] [PATCH v1 1/2] serial: serial_stm32: Enable overrun Patrice Chotard
[U-Boot] [PATCH v1 2/2] serial: serial_stm32: Rename status register flags Patrice Chotard
[U-Boot] [PATCH] ARM: dts: sti: Add stih410-b2260-u-boot.dtsi Patrice Chotard
[U-Boot] [RESEND][PATCH v1] phy: add support for STM32 usb phy controller Patrice Chotard
[U-Boot] [RESEND][PATCH v1 0/3] Add STM32MP157 regulator driver Patrice Chotard
[U-Boot] [RESEND][PATCH v1 1/3] power: pmic: stpmu1: Add regulator bindings Patrice Chotard
[U-Boot] [RESEND][PATCH v1 2/3] ARM: dts: stm32mp157c-ed1: Add regulator node Patrice Chotard
[U-Boot] [RESEND][PATCH v1 3/3] configs: stm32mp15_basic: Set regulator relative flags Patrice Chotard
[U-Boot] [RESEND][PATCH v1 0/2] Add STM32MP157 SoC Power regulator Patrice Chotard
[U-Boot] [RESEND][PATCH v1 1/2] stm32mp: regulator: add SoC pwr regulator support Patrice Chotard
[U-Boot] [RESEND][PATCH v1 2/2] ARM: dts: stm32mp157: Add SoC pwr regulator entry Patrice Chotard
[U-Boot] [RESEND][PATCH v1 0/4] Add STM32 VREFBUF regulator driver Patrice Chotard
[U-Boot] [RESEND][PATCH v1 1/4] power: regulator: Add support for stm32-vrefbuf Patrice Chotard
[U-Boot] [RESEND][PATCH v1 2/4] clk: stm32mp1: Add VREF clock gating Patrice Chotard
[U-Boot] [RESEND][PATCH v1 3/4] configs: stm32mp15: Enable STM32_VREFBUF flag Patrice Chotard
[U-Boot] [RESEND][PATCH v1 4/4] ARM: dts: stm32mp157: Add vrefbuf DT node Patrice Chotard
[U-Boot] [PATCH v1 00/11] Update STM32 QSPI driver Patrice Chotard
[U-Boot] [PATCH v1 01/11] spi: stm32_qspi: Remove CONFIG_CLK flag Patrice Chotard
[U-Boot] [PATCH v1 02/11] spi: stm32_qspi: Solve issue detected by checkpatch Patrice Chotard
[U-Boot] [PATCH v1 03/11] spi: stm32_qspi: Sort include files alphabetically Patrice Chotard
[U-Boot] [PATCH v1 04/11] spi: stm32_qspi: Align reg-names with kernel 4.12 RC1 Patrice Chotard
[U-Boot] [PATCH v1 05/11] spi: stm32_qspi: Add st, stm32f469-qspi compatible string Patrice Chotard
[U-Boot] [PATCH v1 06/11] spi: stm32_qspi: Update mode management Patrice Chotard
[U-Boot] [PATCH v1 07/11] spi: stm32_qspi: Add chip select management Patrice Chotard
[U-Boot] [PATCH v1 08/11] spi: stm32_qspi: Use dev_read_xxx API Patrice Chotard
[U-Boot] [PATCH v1 09/11] spi: stm32_qspi: Add reset support Patrice Chotard
[U-Boot] [PATCH v1 10/11] ARM: dts: stm32: Add quadspi reset for stm32f746 Patrice Chotard
[U-Boot] [PATCH v1 11/11] ARM: dts: stm32: Update qspi bindings for stm32f746 Patrice Chotard
[U-Boot] [RESEND][PATCH v1 0/4] Add STM32MP157 regulator driver Patrice Chotard
[U-Boot] [RESEND][PATCH v1 1/4] power: regulator: stpmu1: Introduce stpmu1 driver Patrice Chotard
[U-Boot] [RESEND][PATCH v1 2/4] power: pmic: stpmu1: Add regulator bindings Patrice Chotard
[U-Boot] [RESEND][PATCH v1 3/4] ARM: dts: stm32mp157c-ed1: Add regulator node Patrice Chotard
[U-Boot] [RESEND][PATCH v1 4/4] configs: stm32mp15_basic: Set regulator relative flags Patrice Chotard
[U-Boot] [PATCH v2] phy: add support for STM32 usb phy controller Patrice Chotard
[U-Boot] [PATCH v1] ubifs: avoid assert failed in ubifs.c Patrice Chotard
[U-Boot] [PATCH] mmc: uniphier-sd: fix the implicit-function declaration error Jaehoon Chung
[U-Boot] mmc: fix return value check condition Jaehoon Chung
[U-Boot] [U-Boot,1/2] mmc: add HS400 support Jaehoon Chung
[U-Boot] [U-Boot,2/2] mmc: fsl_esdhc: enable HS400 feature Jaehoon Chung
[U-Boot] dm: mmc: socfpga: call dwmci_probe() Jaehoon Chung
[U-Boot] [U-Boot, 1/1] drivers:power:max77693: remove redundant logical constraint Jaehoon Chung
[U-Boot] [U-Boot,v2] power: pwm regulator: support live tree Jaehoon Chung
[U-Boot] mmc: fix check of returned value of sd_read_ssr function Jaehoon Chung
[U-Boot] mmc: fix check of returned value of sd_read_ssr function Jaehoon Chung
[U-Boot] [U-Boot, BUG] snow: mmc: SD card access broken: unable to select a mode Jaehoon Chung
[U-Boot] [PATCH v5 3/6] power: as3722: fix ldo_get/set_enable for ldo index bigger than 7 Jaehoon Chung
[U-Boot] dm: mmc: socfpga: call dwmci_probe() Jaehoon Chung
[U-Boot] dm: mmc: socfpga: call dwmci_probe() Jaehoon Chung
[U-Boot] [RESEND][PATCH v1 0/3] Add STM32MP157 regulator driver Jaehoon Chung
[U-Boot] [PATCH] arm: stm32mp1: add PSCI support Patrick DELAUNAY
[U-Boot] [PATCH 1/1] MAINTAINERS: ARM STM STM32MP: correct file paths Patrick DELAUNAY
[U-Boot] [PATCH 3/6] tegra: psci: save context id in cpu_on command Patrick DELAUNAY
[U-Boot] [PATCH 0/2] tools: mkenvimage: Fix input from STDIN Alexander Dahl
[U-Boot] [PATCH 1/2] tools: mkenvimage: Fix read() stdin error handling Alexander Dahl
[U-Boot] [PATCH 2/2] tools: mkenvimage: Fix possible segfault on stdin input Alexander Dahl
[U-Boot] [PATCH] arm: mach-omap2: Enlarge SYS_MALLOC_F_LEN Andrew F. Davis
[U-Boot] [PATCH 0/5] Use Android DT image format for TI boards Andrew F. Davis
[U-Boot] [PATCH 3/5] arm: ti: boot: Extract PARTS_DEFAULT to boot.h Andrew F. Davis
[U-Boot] [PATCH 4/5] arm: ti: boot: Add dtbo partition for Android boot Andrew F. Davis
[U-Boot] [PATCH v2 1/3] arm: psci: save context id for cpu_on PSCI command Patrick Delaunay
[U-Boot] [PATCH v2 2/3] arm: psci: add a weak function psci_arch_cpu_entry Patrick Delaunay
[U-Boot] [PATCH v2 3/3] arm: stm32mp1: add PSCI support Patrick Delaunay
[U-Boot] [PATCH 1/6] ls102xa: psci: save context id in cpu_on command Patrick Delaunay
[U-Boot] [PATCH 2/6] imx7: psci: save context id in cpu_on command Patrick Delaunay
[U-Boot] [PATCH 3/6] tegra: psci: save context id in cpu_on command Patrick Delaunay
[U-Boot] [PATCH 4/6] uniphier: psci: save context id in cpu_on command Patrick Delaunay
[U-Boot] [PATCH 5/6] sunxi: psci: save context id in cpu_on command Patrick Delaunay
[U-Boot] [PATCH 6/6] psci: arm: remove armv7 function psci_save_target_pc Patrick Delaunay
[U-Boot] [PATCH] fsl-ifc-nand : Corrected the programming of chip select Ronak Desai
[U-Boot] [PATCH] Added set feature command in FSL IFC nand controller driver for ONFI nand Ronak Desai
[U-Boot] [Feature] Android Fastboot over Ethernet Alex Deymo
[U-Boot] [PATCH 0/6] Android A/B Bootloader support Alex Deymo
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Deymo
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Deymo
[U-Boot] [RFC PATCH v1 4/5] dfu: Resolve Kconfig dependency loops Alex Deymo
[U-Boot] [PATCH 0/8] Initial integration of AVB2.0 Alex Deymo
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Deymo
[U-Boot] [PATCH 6/6] cmd: Add "boot_android" command. Alex Deymo
[U-Boot] [PATCH 0/8] Initial integration of AVB2.0 Alex Deymo
[U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Ben Dooks
[U-Boot] [PATCH] drivers: spi: migrate cf_spi to DM Angelo Dureghello
[U-Boot] [PATCH] imx: mx7: snvs: Add an SNVS init routine Fabio Estevam
[U-Boot] [PATCH] imx: mx7: snvs: Add an SNVS init routine Fabio Estevam
[U-Boot] [PATCH] pico-imx7d: Replace fatload command Fabio Estevam
[U-Boot] [PATCH] imx: Create distinct pre-processed mkimage config files Fabio Estevam
[U-Boot] [PATCH] treewide: fix up files incorrectly marked executable Fabio Estevam
[U-Boot] [PATCH] arm64: Add SMC and HVC commands Fabio Estevam
[U-Boot] [PATCH] imx: nitrogen6x: Convert Sabrelite to distro boot support Fabio Estevam
[U-Boot] [PATCH] mx6cuboxi: Fix some memory configuration errors Fabio Estevam
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Fabio Estevam
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Fabio Estevam
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Fabio Estevam
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Fabio Estevam
[U-Boot] u-boot 2018 SPI SPL Fabio Estevam
[U-Boot] u-boot 2018 SPI SPL Fabio Estevam
[U-Boot] i.MX6 PAD_CTL_SPEED_LOW possibly wrong Fabio Estevam
[U-Boot] [PATCH] Revert "imximage: Remove failure when no IVT offset is found" Fabio Estevam
[U-Boot] u-boot 2018 SPI SPL Fabio Estevam
[U-Boot] [PATCH v3 00/17] warp7: Enable automated OPTEE/HAB boot flow Fabio Estevam
[U-Boot] [PATCH 2/2] imx6ul: opos6ul: in Serial Downloader boot mode use ymodem Fabio Estevam
[U-Boot] [PATCH v2 2/2] imx6ul: opos6ul: in Serial Downloader boot mode use ymodem Fabio Estevam
[U-Boot] u-boot 2018 SPI SPL Fabio Estevam
[U-Boot] [PATCH] mx7dsabresd: Remove the mx7dsabresd_secure_defconfig target Fabio Estevam
[U-Boot] u-boot 2018 SPI SPL Fabio Estevam
[U-Boot] [RFC] rules for SPDX-License-Identifier Fabio Estevam
[U-Boot] [PATCH] tools/imximage: Fix fruity lack of 0x prefix in DCD Blocks Fabio Estevam
[U-Boot] [PATCH] imx: mx6: add is_boot_from_usb define Fabio Estevam
[U-Boot] [PATCH v4 2/3] warp7: secure_defconfig: Remove secure_defconfig Fabio Estevam
[U-Boot] u-boot.dtb is not generated when enabling verified boot Fabio Estevam
[U-Boot] u-boot.dtb is not generated when enabling verified boot Fabio Estevam
[U-Boot] [PATCH] power: pmic: Let PFUZE3000 see all 256 registers Fabio Estevam
[U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05 Fabio Estevam
[U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues Kyle Evans
[U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues Kyle Evans
[U-Boot] arm: imx: Rework i.MX specific commands to be excluded from SPL Peng Fan
[U-Boot] arm: imx: Rework i.MX specific commands to be excluded from SPL Peng Fan
[U-Boot] [PATCH 1/1] sunxi: R40: add support for gigabit ethernet Lothar Felten
[U-Boot] [PATCH v2 1/5] sunxi: R40: add gigabit ethernet clocks Lothar Felten
[U-Boot] [PATCH v2 2/5] sunxi: R40: add gigabit ethernet reset Lothar Felten
[U-Boot] [PATCH v2 3/5] sunxi: R40: add gigabit ethernet gpio pinmux Lothar Felten
[U-Boot] [PATCH v2 4/5] sunxi: R40: add gigabit ethernet devicetree node Lothar Felten
[U-Boot] [PATCH v2 5/5] configs: Bananapi_M2_Ultra: enable gigabit on the Bananapi M2U Lothar Felten
[U-Boot] [PATCH v3 1/5] sunxi: R40: add gigabit ethernet clocks Lothar Felten
[U-Boot] [PATCH v3 2/5] net: sun8i-emac: support R40 GMAC Lothar Felten
[U-Boot] [PATCH v3 3/5] sunxi: R40: add gigabit ethernet gpio pinmux Lothar Felten
[U-Boot] [PATCH v3 4/5] sunxi: R40: add gigabit ethernet devicetree node Lothar Felten
[U-Boot] [PATCH v3 5/5] configs: Bananapi_M2_Ultra: enable gigabit on the Bananapi Lothar Felten
[U-Boot] [PATCH v2 5/5] configs: Bananapi_M2_Ultra: enable gigabit on the Bananapi M2U Lothar Felten
[U-Boot] [PATCH 1/2] [RFC]new command: wol - Wake on LAN Lothar Felten
[U-Boot] [PATCH 2/2] [RFC]new command: wol - enable command Lothar Felten
[U-Boot] AM3517-EVM MMC broken Adam Ford
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH] mach-snapdragon: Fix UART clock flow Ramon Fried
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH v2] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] [PATCH v3] db410c: set clk node to be probed before relocation Ramon Fried
[U-Boot] Appended DTB Android boot image support Ramon Fried
[U-Boot] [usb dwc3] xHCI driver -- a hint needed. Yuri Frolov
[U-Boot] [PATCH] imx: nitrogen6x: Convert Sabrelite to distro boot support Guillaume GARDET
[U-Boot] [PATCH V2] imx: nitrogen6x: Convert Sabrelite to distro boot support Guillaume GARDET
[U-Boot] [PATCH] mmc: fix check of returned value of sd_read_ssr function Guillaume GARDET
[U-Boot] [PATCH V3 0/3] Update sabrelite and nitrogen6x boards to use distro boot support Guillaume GARDET
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Guillaume GARDET
[U-Boot] [PATCH V3 2/3] imx6: Convert sabrelite and nitrogen6x boards to distro boot support Guillaume GARDET
[U-Boot] [PATCH V3 3/3] imx6: sabrelite: update defconfig to use distro defaults Guillaume GARDET
[U-Boot] [PATCH V4 0/2] Update sabrelite and nitrogen6x boards to use distro boot support Guillaume GARDET
[U-Boot] [PATCH V4 1/2] imx6: Convert sabrelite and nitrogen6x boards to distro boot support Guillaume GARDET
[U-Boot] [PATCH V4 2/2] imx6: sabrelite: update defconfig to use distro defaults Guillaume GARDET
[U-Boot] [PATCH V5 0/2] Update sabrelite and nitrogen6x boards to use distro boot support Guillaume GARDET
[U-Boot] [PATCH V5 1/2] imx6: Convert sabrelite and nitrogen6x boards to distro boot support Guillaume GARDET
[U-Boot] [PATCH V5 2/2] imx6: sabrelite: update defconfig to use distro defaults Guillaume GARDET
[U-Boot] [PATCH V6 0/2] Update sabrelite and nitrogen6x boards to use distro boot support Guillaume GARDET
[U-Boot] [PATCH V6 1/2] imx6: Convert sabrelite and nitrogen6x boards to distro boot support Guillaume GARDET
[U-Boot] [PATCH V6 2/2] imx6: sabrelite: update defconfig to use distro defaults Guillaume GARDET
[U-Boot] [PATCH RFC] spi: mxs spi: DM conversion Akash Gajjar
[U-Boot] [PATCH RFC] spi: mxs spi: DM conversion Akash Gajjar
[U-Boot] [PATCH v1 1/3] spi: sh_qspi: DM conversion Akash Gajjar
[U-Boot] [PATCH v1 2/3] spi: sh_spi: DM conversion Akash Gajjar
[U-Boot] [PATCH v1 3/3] spi: mxs_spi: DM conversion Akash Gajjar
[U-Boot] [PATCH] [U-boot] net/phy/cortina: Add support for CS4223 PHY Vicentiu Galanopulo
[U-Boot] [PATCH u-boot 1/2] ARM: meson: rename GXBB to GX Beniamino Galvani
[U-Boot] [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs Beniamino Galvani
[U-Boot] [PATCH 1/2] nand: zynq: Fix driver initialization Ezequiel Garcia
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume Gardet
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume Gardet
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume Gardet
[U-Boot] [PATCH] imx: nitrogen6x: Convert Sabrelite to distro boot support Guillaume Gardet
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume Gardet
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume Gardet
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Guillaume Gardet
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Guillaume Gardet
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Guillaume Gardet
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Guillaume Gardet
[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC Guillaume Gardet
[U-Boot] [PATCH V5 2/2] imx6: sabrelite: update defconfig to use distro defaults Guillaume Gardet
[U-Boot] [U-Boot, BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume Gardet
[U-Boot] Weird listing/behaviour of serverip in uboot Ajay Garg
[U-Boot] Hang while booting kernel via tftp/nfs on cubieboard2 Ajay Garg
[U-Boot] Hang while booting kernel via tftp/nfs on cubieboard2 Ajay Garg
[U-Boot] [Cubieboard-2] Booting up stuck at runlevel-2 Ajay Garg
[U-Boot] Hang while booting kernel via tftp/nfs on cubieboard2 Ajay Garg
[U-Boot] [Cubieboard-2] Booting up stuck at runlevel-2 Ajay Garg
[U-Boot] [PATCH v2] armv8: sec_firmware: Add support for multiple loadables Sumit Garg
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Jagdish Gediya
[U-Boot] Make error in U-boot branch v2015.10-rc5 Arunashis Ghose
[U-Boot] Make error in U-boot branch v2015.10-rc5 Arunashis Ghose
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section David Gibson
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section David Gibson
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section David Gibson
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section David Gibson
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section David Gibson
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section David Gibson
[U-Boot] [RFC][PATCH] cmd: fdt: Fix fdt address information after the movement Simon Glass
[U-Boot] [PATCH 2/3] fs: cbfs: fix locating the cbfs header Simon Glass
[U-Boot] [PATCH 3/3] cbfs: add support for cbfs header components Simon Glass
[U-Boot] [PATCH 1/2] dm: led: Support "default-state" property Simon Glass
[U-Boot] [PATCH v2 1/2] core: add uclass_get_device_by_phandle_id() api Simon Glass
[U-Boot] [U-Boot, v2, 2/2] pinctrl-uclass: convert to use live dt Simon Glass
[U-Boot] [PATCH 1/3] cmd: cbfs: fix reading the end_of_rom pointer for 64bit archs Simon Glass
[U-Boot] [PATCH 2/3] fs: cbfs: fix locating the cbfs header Simon Glass
[U-Boot] [PATCH] dm: core: make fixed-clock dt scan live dt compatible Simon Glass
[U-Boot] [PATCH v2] core: ofnode: Fix translation for #size-cells == 0 Simon Glass
[U-Boot] [PATCH 1/5] libfdt: move FDT_RAMDISK_OVERHEAD to image-fdt.c Simon Glass
[U-Boot] [PATCH 2/5] fdt_region: remove unneeded fdt_internal.h inclusion Simon Glass
[U-Boot] [PATCH 3/5] image.h: add forward declaration of struct fdt_region Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Simon Glass
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Simon Glass
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Simon Glass
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Simon Glass
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH] log: Correct missing free() on error in log_add_filter() Simon Glass
[U-Boot] [PATCH] log: Add units to code-size stats in README.log Simon Glass
[U-Boot] [PATCH v2] tools: buildman: Don't use the working dir as build dir Simon Glass
[U-Boot] [PATCH v3 14/14] log: Add documentation Simon Glass
[U-Boot] [PATCH] tools: buildman: prevent trying to use the working directory as build dorectory Simon Glass
[U-Boot] [PATCH v2 1/3] dm: led: Support "default-state" property Simon Glass
[U-Boot] [PATCH v2 2/3] dm: led: auto probe() LEDs with "default-state" Simon Glass
[U-Boot] [PATCH v2 3/3] dm: led: add testcase for "default-state" property Simon Glass
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Simon Glass
[U-Boot] [PATCH v2 u-boot 2/2] reset: add sandbox test for bulk API Simon Glass
[U-Boot] [PATCH v2 u-boot 1/2] reset: Add get/assert/deassert/release for bulk of reset signals Simon Glass
[U-Boot] [PATCH v2 u-boot 1/2] clk: Add get/enable/disable/release for a bulk of clocks Simon Glass
[U-Boot] [PATCH v2 u-boot 2/2] clk: add sandbox test for bulk API Simon Glass
[U-Boot] [PATCH v3] tools: buildman: Don't use the working dir as build dir Simon Glass
[U-Boot] [PATCH v2] tools: buildman: Don't use the working dir as build dir Simon Glass
[U-Boot] [PATCH v3] tools: buildman: Don't use the working dir as build dir Simon Glass
[U-Boot] [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs Simon Glass
[U-Boot] [PATCH v2 01/17] dm: core: add functions to get memory-mapped I/O addreses Simon Glass
[U-Boot] [PATCH] arm64: Add SMC and HVC commands Simon Glass
[U-Boot] [PATCH v3 3/3] dm: led: add testcase for "default-state" property Simon Glass
[U-Boot] [PATCH v3 1/3] dm: led: Support "default-state" property Simon Glass
[U-Boot] [PATCH v3 2/3] dm: led: auto probe() LEDs with "default-state" Simon Glass
[U-Boot] [PATCH v2 u-boot 2/2] reset: add sandbox test for bulk API Simon Glass
[U-Boot] [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs Simon Glass
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section Simon Glass
[U-Boot] [PATCH v3] arm64: Add SMC and HVC commands Simon Glass
[U-Boot] [PATCH v3] arm64: Add SMC and HVC commands Simon Glass
[U-Boot] [PATCH 1/8] core: Add uclass_{first, next}_device_compat Simon Glass
[U-Boot] [PATCH 6/7] video_display: Add power_on function Simon Glass
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Simon Glass
[U-Boot] [PATCH 7/7] video_display: Add Xilinx LogiCore DP TX Simon Glass
[U-Boot] [PATCH] reset: fix bulk API when DM_RESET is disabled Simon Glass
[U-Boot] [PATCH v3] arm64: Add SMC and HVC commands Simon Glass
[U-Boot] [PATCH v2 03/18] bootvx: x86: Explicitly clear the bootloader image size Simon Glass
[U-Boot] [PATCH v2 08/18] elf: Add ELF64 related structure defines Simon Glass
[U-Boot] [PATCH v2 09/18] elf: Add a very simple ELF64 loader Simon Glass
[U-Boot] [PATCH v2 10/18] bios: vesa: Guard setting vesa mode with CONFIG_FRAMEBUFFER_SET_VESA_MODE Simon Glass
[U-Boot] [PATCH v2 11/18] video: vesa: Change default FRAMEBUFFER_VESA_MODE Simon Glass
[U-Boot] [PATCH v2 12/18] x86: Change default FRAMEBUFFER_VESA_MODE of some boards Simon Glass
[U-Boot] [PATCH v2 13/18] pci: video: Only print out when everything is OK Simon Glass
[U-Boot] [PATCH v2 14/18] bootvx: x86: Make VxWorks EFI console driver happy Simon Glass
[U-Boot] [PATCH v2 15/18] bootvx: Refactor the bootline copy codes a little bit Simon Glass
[U-Boot] [PATCH] env: Relocate env drivers if manual reloc is required Simon Glass
[U-Boot] [PATCH 1/3] core: Add function to get device for ofnode Simon Glass
[U-Boot] [PATCH 2/3] core: Add functions to set properties in live-tree Simon Glass
[U-Boot] [PATCH v5 2/2] timer: Add High Precision Event Timers (HPET) support Simon Glass
[U-Boot] [PATCH] fit: skip signature verification if board request Simon Glass
[U-Boot] [PATCH] x86: Rename coreboot-x86 to coreboot Simon Glass
[U-Boot] [PATCH v2] bootm: Align cache flush begin address Simon Glass
[U-Boot] [PATCH] serial: Remove duplicated line in Makefile Simon Glass
[U-Boot] [PATCHv1 14/14] reset: remove request and free functions Simon Glass
[U-Boot] [PATCH] fit: skip signature verification if board request Simon Glass
[U-Boot] [PATCH] kbuild: use -fmacro-prefix-map to make __FILE__ a relative path Simon Glass
[U-Boot] [PATCH 1/1] env: mmc/fat/ext4: undefined reference to `mmc_initialize' Simon Glass
[U-Boot] [PATCH v5 2/2] timer: Add High Precision Event Timers (HPET) support Simon Glass
[U-Boot] [PATCH v4] arm64: Add SMC and HVC commands Simon Glass
[U-Boot] [PATCH v10 3/3] Adding wget Simon Glass
[U-Boot] [RFC][PATCH] cmd: fdt: Fix fdt address information after the movement Simon Glass
[U-Boot] [PATCH v2] bootm: Align cache flush begin address Simon Glass
[U-Boot] [PATCHv1 14/14] reset: remove request and free functions Simon Glass
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Simon Glass
[U-Boot] [PATCH 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice Simon Glass
[U-Boot] [PATCH] pinctrl: do not set_state for device without valid ofnode Simon Glass
[U-Boot] [PATCH 7/7] video_display: Add Xilinx LogiCore DP TX Simon Glass
[U-Boot] [PATCH 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Simon Glass
[U-Boot] [PATCH 1/4] regmap: clean up regmap allocation Simon Glass
[U-Boot] [PATCH 4/4] syscon: add Linux-compatible syscon API Simon Glass
[U-Boot] [PATCH 0/5] Use Android DT image format for TI boards Simon Glass
[U-Boot] [PATCH 1/3] core: Add function to get device for ofnode Simon Glass
[U-Boot] [PATCH 6/7] video_display: Add power_on function Simon Glass
[U-Boot] [PATCH 1/3] rockchip: rk3036: add ofdata_to_platdata() callback for driver Simon Glass
[U-Boot] Network Packet Buffers: raspberrypi: variable uchar *net_rx_packets[PKTBUFSRX] in net/net.c Simon Glass
[U-Boot] [PATCH v2] bootm: Align cache flush begin address Simon Glass
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Simon Glass
[U-Boot] [PATCH 1/1] log: CONFIG_LOG should select CONFIG_DM Simon Glass
[U-Boot] [PATCH 1/1] cmd: CONFIG_CMD_LOG select CONFIG_LOG Simon Glass
[U-Boot] [[RESEND] PATCH v3 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE Simon Glass
[U-Boot] [PATCH] lib/rsa: Kconfig: Remove superfluous 'depends on RSA' Simon Glass
[U-Boot] [PATCH v10 3/3] Adding wget Simon Glass
[U-Boot] [PATCH] test: regmap: test Linux-compatible syscon_node_to_regmap() Simon Glass
[U-Boot] [PATCH 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Simon Glass
[U-Boot] [PATCH 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice Simon Glass
[U-Boot] [PATCH 4/4] syscon: add Linux-compatible syscon API Simon Glass
[U-Boot] [PATCH v10 3/3] Adding wget Simon Glass
[U-Boot] [PATCH v2 10/19] tpm: add TPM2_SelfTest command support Simon Glass
[U-Boot] [PATCH v2 11/19] tpm: add TPM2_Clear command support Simon Glass
[U-Boot] [PATCH v2 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice Simon Glass
[U-Boot] [PATCH v2 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Simon Glass
[U-Boot] [PATCH] cmd: add ADC cli commands Simon Glass
[U-Boot] [PATCH] regmap: add regmap_update_bits() helper Simon Glass
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Simon Glass
[U-Boot] [PATCH] test: ofnode: test ofnode_device_is_compatible() Simon Glass
[U-Boot] [PATCH v2 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Simon Glass
[U-Boot] [PATCH] test: dm: regmap: fix license header Simon Glass
[U-Boot] [PATCH 1/2] [RFC]new command: wol - Wake on LAN Simon Glass
[U-Boot] [PATCH 2/2] [RFC]new command: wol - enable command Simon Glass
[U-Boot] [PATCH] cmd: add ADC cli commands Simon Glass
[U-Boot] Appended DTB Android boot image support Simon Glass
[U-Boot] [RFC PATCH v2 01/20] fastboot: Move fastboot to drivers/fastboot Simon Glass
[U-Boot] [PATCH v3] dm: core: add functions to get memory-mapped I/O addresses Simon Glass
[U-Boot] [PATCH v2 1/3] drivers: Add board uclass Simon Glass
[U-Boot] [PATCH v2 1/2] regmap: add regmap_update_bits() helper Simon Glass
[U-Boot] [PATCH v2 2/2] test: regmap: add read/modify/write test Simon Glass
[U-Boot] [PATCH 3/5] pmic: dm: Provide *trans_len() callback for pmic-uclass Simon Glass
[U-Boot] [PATCH v2 3/3] test: Add tests for board uclass Simon Glass
[U-Boot] [PATCH 4/5] pmic: dm: Rewrite pmic_reg_{read|write} and pmic_clrsetbits to support transmissions larger than 1 byte Simon Glass
[U-Boot] [PATCH v2 06/10] timer: Add MPC83xx timer driver Simon Glass
[U-Boot] [PATCH] regmap: add regmap_update_bits() helper Simon Glass
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Simon Glass
[U-Boot] [PATCH v2 1/4] core: Add functions to set properties in live-tree Simon Glass
[U-Boot] [PATCH] kconfig: add CONFIG_CC_COVERAGE Christian Gmeiner
[U-Boot] Question regarding cpu_get_count(..) Christian Gmeiner
[U-Boot] Question regarding cpu_get_count(..) Christian Gmeiner
[U-Boot] Question regarding cpu_get_count(..) Christian Gmeiner
[U-Boot] [PATCH] kconfig: add CONFIG_CC_COVERAGE Christian Gmeiner
[U-Boot] Question regarding cpu_get_count(..) Christian Gmeiner
[U-Boot] [PATCH v2] kconfig: add CONFIG_CC_COVERAGE Christian Gmeiner
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Christian Gmeiner
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Christian Gmeiner
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Christian Gmeiner
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Christian Gmeiner
[U-Boot] [PATCH 1/3] doc: vxworks: Minor update for clarity Christian Gmeiner
[U-Boot] [PATCH v2 02/18] bootvx: x86: Prepare e820 related stuff from the given kernel memory base address Christian Gmeiner
[U-Boot] [PATCH v2 04/18] vxworks: x86: Rename e820info to e820_info Christian Gmeiner
[U-Boot] [PATCH v2 05/18] x86: Use 'unsigned int' in install_e820_map() functions Christian Gmeiner
[U-Boot] [PATCH v2 06/18] x86: Rename e820entry to e820_entry Christian Gmeiner
[U-Boot] [PATCH v2 07/18] elf: Clean up the ELF header file Christian Gmeiner
[U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq Christian Gmeiner
[U-Boot] [PATCH v2 2/2] x86: Intel Crown Bay board: switch to TunnelCreek cpu driver Christian Gmeiner
[U-Boot] skylake fsp Christian Gmeiner
[U-Boot] [PATCH v1] rockchip: defconfig: puma-rk3399: enable RTC Klaus Goger
[U-Boot] [PATCH v1] arm: mxs: make startup code thumb compatible Klaus Goger
[U-Boot] [PATCH v2 0/2] While trying to compile u-boot in thumb due space constraints on a mxs Klaus Goger
[U-Boot] [PATCH v2 1/2] arm: make arm926ejs startup code thumb compatible Klaus Goger
[U-Boot] [PATCH v2 2/2] arm: Make arch specific memcpy thumb-safe. Klaus Goger
[U-Boot] [PATCH v3 0/2] Fix thumb interwork in assembly code Klaus Goger
[U-Boot] [PATCH v3 1/2] arm: preserve lr correctly in arm926ejs startup code Klaus Goger
[U-Boot] [PATCH v3 2/2] arm: Make arch specific memcpy thumb-safe. Klaus Goger
[U-Boot] [PATCH v3 03/15] env: Pass additional parameters to the env lookup function Simon Goldschmidt
[U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH] efi_loader: Check machine type in the image header Ivan Gorinov
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Ivan Gorinov
[U-Boot] [PATCH v2] efi_loader: Check machine type in the image header Ivan Gorinov
[U-Boot] [PATCH v3] efi_loader: Check machine type in the image header Ivan Gorinov
[U-Boot] [PATCH v4] timer: Add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH v4] timer: Add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH v5 0/2] timer: Add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH v5 1/2] x86: Add 64-bit memory-mapped I/O functions Ivan Gorinov
[U-Boot] [PATCH v5 2/2] timer: Add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH v6] x86: Add 64-bit memory-mapped I/O functions Ivan Gorinov
[U-Boot] [PATCH v6 0/2] timer: Add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Ivan Gorinov
[U-Boot] [PATCH v6 2/2] timer: Add High Precision Event Timers (HPET) support Ivan Gorinov
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Ivan Gorinov
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Ivan Gorinov
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Ivan Gorinov
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Ivan Gorinov
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Ivan Gorinov
[U-Boot] [RFC PATCH] net: gem: Add support for more PHYs on MDIO bus Tomasz Gorochowik
[U-Boot] [PATCH] git: mailrc: Add myself and efi to list Alexander Graf
[U-Boot] [PATCH] arm64: zynqmp: Remove power domain description Alexander Graf
[U-Boot] [PATCH] arm64: zynqmp: Remove pinctrl settings Alexander Graf
[U-Boot] [RFC] Analyzing data abort in EFI payload Alexander Graf
[U-Boot] [PATCH 1/2] efi_loader: new functions to print loaded image information Alexander Graf
[U-Boot] [PATCH v2 5/6] efi_loader: new functions to print loaded image information Alexander Graf
[U-Boot] [PATCH 1/1] efi_loader: completely initialize network Alexander Graf
[U-Boot] [PATCH v2 2/3] arm: armv7: allow unaligned memory access Alexander Graf
[U-Boot] efi_loader: Fix network DP with DM_ETH Alexander Graf
[U-Boot] [U-Boot,1/2] efi_loader: Optimize GOP switch Alexander Graf
[U-Boot] [U-Boot,2/2] efi_loader: Optimize GOP more Alexander Graf
[U-Boot] efi_loader: Fix return value for efi_add_runtime_mmio Alexander Graf
[U-Boot] [U-Boot, 1/2] efi_loader: complete efi_pxe_mode struct definition Alexander Graf
[U-Boot] efi_loader: initialize device path on alloc Alexander Graf
[U-Boot] [PATCH v2 2/3] arm: armv7: allow unaligned memory access Alexander Graf
[U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access Alexander Graf
[U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access Alexander Graf
[U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access Alexander Graf
[U-Boot] [PATCH v3 2/2] arm: print information about loaded UEFI images Alexander Graf
[U-Boot] [PATCH] rpi: Allow to boot without serial Alexander Graf
[U-Boot] [U-Boot,1/2] rpi3: Enable lan78xx driver Alexander Graf
[U-Boot] rpi3_32b: Enable lan78xx driver Alexander Graf
[U-Boot] [U-Boot,2/2] rpi: Add identifier for the new RPi3 B+ Alexander Graf
[U-Boot] mmc: use core clock frequency in bcm2835 sdhost Alexander Graf
[U-Boot] [PATCH v2] efi_loader: Check machine type in the image header Alexander Graf
[U-Boot] [PATCH v2] efi_loader: Check machine type in the image header Alexander Graf
[U-Boot] [PATCH v2] efi_loader: Check machine type in the image header Alexander Graf
[U-Boot] [PATCH v3] efi_loader: Check machine type in the image header Alexander Graf
[U-Boot] [U-Boot, v3] efi_loader: Check machine type in the image header Alexander Graf
[U-Boot] [PATCH] efi_loader: Respect DT reserved regions Alexander Graf
[U-Boot] [RFC] efi_loader: support for CONFIG_ARMV7_NONSEC Alexander Graf
[U-Boot] rpi: Complete table of models with new revision code scheme Alexander Graf
[U-Boot] [PULL] rpi patch queue 2018-04-06 Alexander Graf
[U-Boot] [PULL] efi patch queue 2018-04-06 Alexander Graf
[U-Boot] [PATCH] efi_loader: Respect DT reserved regions Alexander Graf
[U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K Alexander Graf
[U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K Alexander Graf
[U-Boot] [PULL] efi patch queue 2018-04-09 Alexander Graf
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Alexander Graf
[U-Boot] [PATCH] part: Disable CONFIG_SPL_ISO_PARTITION by default Alexander Graf
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Alexander Graf
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Alexander Graf
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Alexander Graf
[U-Boot] [PATCH v2 0/3] tools: zynqmpimage: Support partitions Alexander Graf
[U-Boot] [PATCH v2 1/3] tools: zynqmpimage: Add partition read support Alexander Graf
[U-Boot] [PATCH v2 2/3] tools: zynqmpimage: Move defines to header Alexander Graf
[U-Boot] [PATCH v2 3/3] tools: zynqmpimage: Add bif support Alexander Graf
[U-Boot] [PATCH v3 0/3] tools: zynqmpimage: Support partitions Alexander Graf
[U-Boot] [PATCH v3 1/3] tools: zynqmpimage: Add partition read support Alexander Graf
[U-Boot] [PATCH v3 2/3] tools: zynqmpimage: Move defines to header Alexander Graf
[U-Boot] [PATCH v3 3/3] tools: zynqmpimage: Add bif support Alexander Graf
[U-Boot] [PATCH v4 0/4] tools: zynqmpimage: Support partitions Alexander Graf
[U-Boot] [PATCH v4 1/4] tools: zynqmpimage: Add partition read support Alexander Graf
[U-Boot] [PATCH v4 2/4] tools: zynqmpimage: Move defines to header Alexander Graf
[U-Boot] [PATCH v4 3/4] MAINTAINERS: Declare tools/zynq*.{c, h} as Xilinx maintained Alexander Graf
[U-Boot] [PATCH v4 4/4] tools: zynqmpimage: Add bif support Alexander Graf
[U-Boot] [PATCH] rpi: Adjust fdt_addr_r to a sane address Alexander Graf
[U-Boot] [PATCH 0/8] riscv: Enable efi_loader support Alexander Graf
[U-Boot] [PATCH 1/8] riscv: Add setjmp/longjmp code Alexander Graf
[U-Boot] [PATCH 2/8] riscv: Enable function sections Alexander Graf
[U-Boot] [PATCH 3/8] efi_loader: selftest: Do not build relocation tests for risc-v Alexander Graf
[U-Boot] [PATCH 4/8] riscv: Add board_quiesce_devices stub Alexander Graf
[U-Boot] [PATCH 5/8] efi_loader: Use EFI_CACHELINE_SIZE in the image loader too Alexander Graf
[U-Boot] [PATCH 6/8] distro: Extend with RISC-V defines Alexander Graf
[U-Boot] [PATCH 7/8] riscv: nx25: Enable distro boot Alexander Graf
[U-Boot] [PATCH 8/8] efi_loader: Enable RISC-V support Alexander Graf
[U-Boot] [PATCH 3/8] efi_loader: selftest: Do not build relocation tests for risc-v Alexander Graf
[U-Boot] [PATCH v2 0/8] riscv: Enable efi_loader support Alexander Graf
[U-Boot] [PATCH v2 1/8] riscv: Add setjmp/longjmp code Alexander Graf
[U-Boot] [PATCH v2 2/8] riscv: Enable function sections Alexander Graf
[U-Boot] [PATCH v2 3/8] riscv: Add EFI application infrastructure Alexander Graf
[U-Boot] [PATCH v2 4/8] riscv: Add board_quiesce_devices stub Alexander Graf
[U-Boot] [PATCH v2 5/8] efi_loader: Use EFI_CACHELINE_SIZE in the image loader too Alexander Graf
[U-Boot] [PATCH v2 6/8] distro: Extend with RISC-V defines Alexander Graf
[U-Boot] [PATCH v2 7/8] riscv: nx25: Enable distro boot Alexander Graf
[U-Boot] [PATCH v2 8/8] efi_loader: Enable RISC-V support Alexander Graf
[U-Boot] [RFC PATCH] arm: zynqmp: Add ZynqMP minimal R5 support Alexander Graf
[U-Boot] [PATCH v2 6/8] distro: Extend with RISC-V defines Alexander Graf
[U-Boot] [PATCH v2 6/8] distro: Extend with RISC-V defines Alexander Graf
[U-Boot] [RFC PATCH] arm: zynqmp: Add ZynqMP minimal R5 support Alexander Graf
[U-Boot] [PATCH v2 3/8] riscv: Add EFI application infrastructure Alexander Graf
[U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support Alexander Graf
[U-Boot] [PATCH v3 1/8] riscv: Add setjmp/longjmp code Alexander Graf
[U-Boot] [PATCH v3 2/8] riscv: Enable function sections Alexander Graf
[U-Boot] [PATCH v3 3/8] riscv: Add EFI application infrastructure Alexander Graf
[U-Boot] [PATCH v3 4/8] riscv: Add board_quiesce_devices stub Alexander Graf
[U-Boot] [PATCH v3 5/8] efi_loader: Use EFI_CACHELINE_SIZE in the image loader too Alexander Graf
[U-Boot] [PATCH v3 6/8] distro: Extend with RISC-V defines Alexander Graf
[U-Boot] [PATCH v3 7/8] riscv: nx25: Enable distro boot Alexander Graf
[U-Boot] [PATCH v3 8/8] efi_loader: Enable RISC-V support Alexander Graf
[U-Boot] [PATCH v3 2/8] riscv: Enable function sections Alexander Graf
[U-Boot] [PULL for 2018.05] efi patch queue 2018-04-23 for 2018.05 Alexander Graf
[U-Boot] [PATCH v3 7/8] riscv: nx25: Enable distro boot Alexander Graf
[U-Boot] [RFC PATCH 2/5] arm: v7R: Add initial support Alexander Graf
[U-Boot] [PATCH] zynqmp: Add generic target Alexander Graf
[U-Boot] [PATCH v2] zynqmp: Add generic target Alexander Graf
[U-Boot] [PATCH v3] zynqmp: Add generic target Alexander Graf
[U-Boot] [PATCH] arm64: zynqmp: Show model information instead of custom IDENT_STRING Alexander Graf
[U-Boot] [PATCH v2] zynqmp: Add generic target Alexander Graf
[U-Boot] [PATCH v4] zynqmp: Add generic target Alexander Graf
[U-Boot] [PATCH] arm64: zynqmp: Simplify boot_target variable composition Alexander Graf
[U-Boot] [RFC PATCH 1/2] arm64: zynqmp: Setup the first boot_target at run time Alexander Graf
[U-Boot] [RFC PATCH 2/2] arm64: zynqmp: Try to create bootcm_mmcX at run time Alexander Graf
[U-Boot] [RFC PATCH 1/2] arm64: zynqmp: Setup the first boot_target at run time Alexander Graf
[U-Boot] [PATCH] distro: select CMD_ENV_EXISTS Alexander Graf
[U-Boot] [RFC PATCH 1/2] arm64: zynqmp: Setup the first boot_target at run time Alexander Graf
[U-Boot] [PATCH] tools: zynqmpbif: Add support for load=after Alexander Graf
[U-Boot] [PATCH v2 0/7] arm: Introduce v7R support Alexander Graf
[U-Boot] [PATCH] arm64: zynqmp: Setup MMU map for DDR at run time Alexander Graf
[U-Boot] [PATCH] arm64: zynqmp: Setup MMU map for DDR at run time Alexander Graf
[U-Boot] [PATCH] tools: zynqmpbif: Add support for load=after Alexander Graf
[U-Boot] [PATCH 1/1] video: if EFI_LOADER is enabled, enable CFB_CONSOLE_ANSI Alexander Graf
[U-Boot] [PATCH v2] arm64: zynqmp: Setup MMU map for DDR at run time Alexander Graf
[U-Boot] [PATCH v2] arm: zynqmp: Add ZynqMP minimal R5 support Alexander Graf
[U-Boot] [PATCH v2] arm: zynqmp: Add ZynqMP minimal R5 support Alexander Graf
[U-Boot] [PATCH] rpi: Complete table of models with new revision code scheme Jonathan Gray
[U-Boot] [PATCH] rsa-sign: Fix build against libressl Jonathan Gray
[U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion Simon Guinot
[U-Boot] [PATCH][v2] armv8: sec_firmware: Remove JR3 from device tree node in all cases Ruchika Gupta
[U-Boot] [PATCH] treewide: fix up files incorrectly marked executable Anatolij Gustschin
[U-Boot] [PATCH] video-uclass: Fix logical-not-parentheses warning Anatolij Gustschin
[U-Boot] Please pull u-boot-video/master Anatolij Gustschin
[U-Boot] [PATCH v2 03/11] net: Move net command options to the cmd menu Duncan Hare
[U-Boot] Network Packet Buffers: raspberrypi: variable uchar *net_rx_packets[PKTBUFSRX] in net/net.c Duncan Hare
[U-Boot] [PATCH v10 3/3] Adding wget Duncan Hare
[U-Boot] Network Packet Buffers: raspberrypi: variable uchar *net_rx_packets[PKTBUFSRX] in net/net.c Duncan Hare
[U-Boot] [PATCH v10 3/3] Adding wget Duncan Hare
[U-Boot] [PATCH v10 3/3] Adding wget Duncan Hare
[U-Boot] [PATCH v10 3/3] Adding wget Duncan Hare
[U-Boot] [PATCH] clk: uniphier: add ethernet clock control support Kunihiko Hayashi
[U-Boot] [PATCH] reset: uniphier: add ethernet reset control support Kunihiko Hayashi
[U-Boot] [RFC PATCH 1/2] fpga: xilinx: zynq: Add support to decrypt images Stefan Herbrechtsmeier
[U-Boot] [RFC PATCH] net: phy: Don't limit phy addresses by default Joe Hershberger
[U-Boot] [PATCH] net: mvneta: support setting hardware address Joe Hershberger
[U-Boot] [PATCH] net: mvneta: support setting hardware address Joe Hershberger
[U-Boot] [PATCH] net: zynq_gem: Use max-speed property from dt Joe Hershberger
[U-Boot] [PATCH] arm64: mvebu: a8k: Add distro boot support Joe Hershberger
[U-Boot] [PATCH] imx: nitrogen6x: Convert Sabrelite to distro boot support Joe Hershberger
[U-Boot] [PATCH 1/1] sunxi: R40: add support for gigabit ethernet Joe Hershberger
[U-Boot] [PATCH] net: sh_eth: Add remaining Gen2 DT compatible Joe Hershberger
[U-Boot] [PATCH v9 1/3] Adding TCP and wget into u-boot Joe Hershberger
[U-Boot] [PATCH] arm: zynq: Disable NFS and MII on zc770 xm011 Joe Hershberger
[U-Boot] [PATCH v2 00/11] net: Clean up the menus and dependencies among commands and options Joe Hershberger
[U-Boot] [PATCH v2 01/11] net: Make CMD_NET a menuconfig Joe Hershberger
[U-Boot] [PATCH v2 02/11] net: Fix distro default dependencies Joe Hershberger
[U-Boot] [PATCH v2 03/11] net: Move net command options to the cmd menu Joe Hershberger
[U-Boot] [PATCH v2 04/11] net: Move the DHCP command below the BOOTP command Joe Hershberger
[U-Boot] [PATCH v2 05/11] net: Improve menu options and help for BOOTP options Joe Hershberger
[U-Boot] [PATCH v2 06/11] net: Add the BOOTP_DNS2 option to Kconfig Joe Hershberger
[U-Boot] [PATCH v2 07/11] net: Improve BOOTP PXE config option Joe Hershberger
[U-Boot] [PATCH v2 08/11] net: Make the BOOTP options default Joe Hershberger
[U-Boot] [PATCH v2 09/11] net: Make core net code depend on NET instead of CMD_NET Joe Hershberger
[U-Boot] [PATCH v2 10/11] Revert "Kconfig: cmd: Make networking command dependent on NET" Joe Hershberger
[U-Boot] [PATCH v2 11/11] xilinx: Only enable dist boot pxe when DHCP is enabled Joe Hershberger
[U-Boot] net: mvneta: support setting hardware address Joe Hershberger
[U-Boot] net: fec_mxc: Fix DM driver issue in recv Joe Hershberger
[U-Boot] net: fec_mxc: simplify fec_get_miibus Joe Hershberger
[U-Boot] net: fec: set dev->seq to priv->dev_id Joe Hershberger
[U-Boot] net: fec: sharing MDIO for two enet controllers Joe Hershberger
[U-Boot] net: fex_mxc: add i.MX6UL/SX/SL compatible Joe Hershberger
[U-Boot] net: fec: Fix issue in DM probe timeout Joe Hershberger
[U-Boot] net: zynq_gem: Use max-speed property from dt Joe Hershberger
[U-Boot] net: sh_eth: Add remaining Gen2 DT compatible Joe Hershberger
[U-Boot] net: Make CMD_NET a menuconfig Joe Hershberger
[U-Boot] net: Fix distro default dependencies Joe Hershberger
[U-Boot] net: Move net command options to the cmd menu Joe Hershberger
[U-Boot] net: Move the DHCP command below the BOOTP command Joe Hershberger
[U-Boot] net: Improve menu options and help for BOOTP options Joe Hershberger
[U-Boot] net: Add the BOOTP_DNS2 option to Kconfig Joe Hershberger
[U-Boot] net: Improve BOOTP PXE config option Joe Hershberger
[U-Boot] net: Make the BOOTP options default Joe Hershberger
[U-Boot] net: Make core net code depend on NET instead of CMD_NET Joe Hershberger
[U-Boot] Revert "Kconfig: cmd: Make networking command dependent on NET" Joe Hershberger
[U-Boot] xilinx: Only enable dist boot pxe when DHCP is enabled Joe Hershberger
[U-Boot] net: phy: Don't limit phy addresses by default Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] net: sh_eth: Add remaining Gen2 DT compatible Joe Hershberger
[U-Boot] [PATCH] net: Express LINK_LOCAL dependency on LIB_RAND Joe Hershberger
[U-Boot] [PATCH v10 1/3] Adding TCP and wget into u-boot Joe Hershberger
[U-Boot] [PATCH v1 0/2] Fix DM_SCSI on DRA7 platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v1 1/2] dwc_ahci: Fix breakage Jean-Jacques Hiblot
[U-Boot] [PATCH v1 2/2] configs: dra7xx_evm/dra7xx_hs_evm: Enable AHCI and PIPE3 Jean-Jacques Hiblot
[U-Boot] [PATCH v1 0/2] Fix DM_SCSI on DRA7 platforms Jean-Jacques Hiblot
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Jean-Jacques Hiblot
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Jean-Jacques Hiblot
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Jean-Jacques Hiblot
[U-Boot] [PATCH v2 u-boot 1/2] reset: Add get/assert/deassert/release for bulk of reset signals Jean-Jacques Hiblot
[U-Boot] [PATCH v3 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Jean-Jacques Hiblot
[U-Boot] [PATCH v4 00/11] Add support for DM_USB for TI's DRA7 EVMs and AM57 EVMs platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v4 01/11] usb: dwc3-of-simple: Fix dependencies Jean-Jacques Hiblot
[U-Boot] [PATCH v4 02/11] usb: dwc3-of-simple: Add support for DRA7/AM57 platforms. Jean-Jacques Hiblot
[U-Boot] [PATCH v4 03/11] syscon: dm: Add a new method to get a regmap from DTS Jean-Jacques Hiblot
[U-Boot] [PATCH v4 04/11] phy: ti-pip3-phy: Add support for USB3 PHY Jean-Jacques Hiblot
[U-Boot] [PATCH v4 05/11] phy: Add a new driver for OMAP's USB2 PHYs Jean-Jacques Hiblot
[U-Boot] [PATCH v4 06/11] board: ti: dra7xx-evm: turn on USB clocks in late init stage Jean-Jacques Hiblot
[U-Boot] [PATCH v4 07/11] board; ti: am57xx: turn on USB clocks Jean-Jacques Hiblot
[U-Boot] [PATCH v4 08/11] dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus Jean-Jacques Hiblot
[U-Boot] [PATCH v4 09/11] dts: dra7x: Disable USB1 on all evms Jean-Jacques Hiblot
[U-Boot] [PATCH v4 10/11] configs: enable OMAP_USB2_PHY for all DRA7 platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v4 11/11] configs: am57xx_evm: Enable DM_USB and dependencies Jean-Jacques Hiblot
[U-Boot] u-boot-usb/master build failure on dra7xx_evm Jean-Jacques Hiblot
[U-Boot] u-boot-usb/master build failure on dra7xx_evm Jean-Jacques Hiblot
[U-Boot] [PATCH v1 6/8] spl: Disable printf if not required Jean-Jacques Hiblot
[U-Boot] [PATCH] armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539 robust Zhiqiang Hou
[U-Boot] [PATCH] armv8/fsl-lsch2: correct QMAN clock Zhiqiang Hou
[U-Boot] [PATCH 0/2] Drive stregth for sama5d2_ptc_ek Eugen Hristev
[U-Boot] [PATCH 1/2] gpio: atmel_pio4: add drive strength macros Eugen Hristev
[U-Boot] [PATCH 2/2] board: atmel: sama5d2_ptc_ek: update pin configuration for NAND Eugen Hristev
[U-Boot] [PATCH] gpio: atmel_pio4: give a full configuration when muxing pins Eugen Hristev
[U-Boot] [PATCH] board: sama5d2_ptc_ek: adjust the smc timings of nand Eugen Hristev
[U-Boot] [PATCH] configs: at91: sama5: updated mtdparts variable in bootargs Eugen Hristev
[U-Boot] [PATCH] board: sama5d27_som1_ek: Fix the USB vbus power Eugen Hristev
[U-Boot] [PATCH] defconfig: at91-sama5d2_ptc_ek: remove unused SYS_EXTRA_OPTIONS Eugen Hristev
[U-Boot] [PATCH 3/4] elf: Add a very simple elf64 loader Calvin Johnson
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Calvin Johnson
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Calvin Johnson
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Calvin Johnson
[U-Boot] [PATCH] arm,imx6: fix PAD_CTL_SPEED_LOW constant Mark Jonas
[U-Boot] [PATCH] sunxi: improve SATAPWR and MACPWR Mylène Josserand
[U-Boot] [PATCH] sunxi: improve SATAPWR and MACPWR Mylène Josserand
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux Mark Kettenis
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux Mark Kettenis
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux Mark Kettenis
[U-Boot] [PATCH] efi_loader: Respect DT reserved regions Mark Kettenis
[U-Boot] [PATCH 1/1] rockchip: rk3288: provide ${fdtfile} Mark Kettenis
[U-Boot] [PATCH v3 0/2] sunxi: add PWM driver for A64 Vasily Khoruzhick
[U-Boot] [PATCH v3 1/2] pwm: sunxi: add support for PWM found on Allwinner A64 Vasily Khoruzhick
[U-Boot] [PATCH v3 2/2] dts: sunxi: add PWM node for sun50i Vasily Khoruzhick
[U-Boot] [PATCH 0/2] sunxi: fix eMMC stability issues on A64 Vasily Khoruzhick
[U-Boot] [PATCH 1/2] sunxi-mmc: use new mode on A64 Vasily Khoruzhick
[U-Boot] [PATCH 2/2] mmc: sunxi: run calibration on A64 Vasily Khoruzhick
[U-Boot] [PATCH 0/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings Vasily Khoruzhick
[U-Boot] [PATCH 1/2] Revert "sunxi: video: HDMI: split VSYNC and HSYNC polarity settings" Vasily Khoruzhick
[U-Boot] [PATCH 2/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings Vasily Khoruzhick
[U-Boot] [PATCH v2 0/5] Build AM335x when CONFIG_NET isn't defined Alex Kiernan
[U-Boot] [PATCH v2 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Alex Kiernan
[U-Boot] [PATCH v2 2/5] ti: am335x: Fix bootargs when building without NET Alex Kiernan
[U-Boot] [PATCH v2 3/5] usb: gadget: USB_ETHER requires network support Alex Kiernan
[U-Boot] [PATCH v2 4/5] ti: am335x: Fix build when networking is disabled Alex Kiernan
[U-Boot] [PATCH v2 5/5] net: Move enetaddr env access code to env config instead of net config Alex Kiernan
[U-Boot] [PATCH v2 1/2] Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Alex Kiernan
[U-Boot] [PATCH v2 2/2] Cleanup CONFIG_VERSION_VARIABLE migration Alex Kiernan
[U-Boot] [PATCH v2 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Alex Kiernan
[U-Boot] [PATCH v2 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Alex Kiernan
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Alex Kiernan
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Alex Kiernan
[U-Boot] [PATCH v1 0/8] Fix SPL build without CONFIG_SPL_SERIAL_SUPPORT Alex Kiernan
[U-Boot] [PATCH v1 1/8] Cleanup CONFIG_SPL_SERIAL_SUPPORT migration Alex Kiernan
[U-Boot] [PATCH v1 2/8] spl: ti: Avoid preloader_console_init if !CONFIG_SPL_SERIAL_SUPPORT Alex Kiernan
[U-Boot] [PATCH v1 3/8] spl: Add dependency on serial to Ymodem Alex Kiernan
[U-Boot] [PATCH v1 4/8] spl: ti: Avoid serial calls when serial support is disabled Alex Kiernan
[U-Boot] [PATCH v1 5/8] spl: Split sprintf, strto* from SPL serial in Kconfig Alex Kiernan
[U-Boot] [PATCH v1 6/8] spl: Disable printf if not required Alex Kiernan
[U-Boot] [PATCH v1 7/8] Consolidate __assert_failed into one implementation Alex Kiernan
[U-Boot] [PATCH v1 8/8] spl: disk: usb: Add dependencies to sprintf/strto* Alex Kiernan
[U-Boot] [PATCH v1 8/8] spl: disk: usb: Add dependencies to sprintf/strto* Alex Kiernan
[U-Boot] [PATCH v1 6/8] spl: Disable printf if not required Alex Kiernan
[U-Boot] [PATCH v2 0/8] Fix SPL build without CONFIG_SPL_SERIAL_SUPPORT Alex Kiernan
[U-Boot] [PATCH v2 1/8] Cleanup CONFIG_SPL_SERIAL_SUPPORT migration Alex Kiernan
[U-Boot] [PATCH v2 2/8] spl: ti: Avoid preloader_console_init if !CONFIG_SPL_SERIAL_SUPPORT Alex Kiernan
[U-Boot] [PATCH v2 3/8] spl: Add dependency on serial to Ymodem Alex Kiernan
[U-Boot] [PATCH v2 4/8] spl: ti: Avoid serial calls when serial support is disabled Alex Kiernan
[U-Boot] [PATCH v2 5/8] spl: Split sprintf, strto* from SPL serial in Kconfig Alex Kiernan
[U-Boot] [PATCH v2 6/8] spl: Disable printf if not required Alex Kiernan
[U-Boot] [PATCH v2 7/8] Consolidate __assert_failed into one implementation Alex Kiernan
[U-Boot] [PATCH v2 8/8] spl: disk: usb: Add dependencies to sprintf/strto* Alex Kiernan
[U-Boot] [RFC PATCH v1 0/1] Migrate IMAGE_FORMAT_LEGACY to Kconfig Alex Kiernan
[U-Boot] [RFC PATCH v1] Migrate IMAGE_FORMAT_LEGACY to Kconfig Alex Kiernan
[U-Boot] [RFC PATCH v1 0/1] Migrate IMAGE_FORMAT_LEGACY to Kconfig Alex Kiernan
[U-Boot] [RFC PATCH v1 0/1] Migrate IMAGE_FORMAT_LEGACY to Kconfig Alex Kiernan
[U-Boot] Make error in U-boot branch v2015.10-rc5 Alex Kiernan
[U-Boot] [PATCH v2] Migrate IMAGE_FORMAT_LEGACY to Kconfig Alex Kiernan
[U-Boot] [PATCH] tools: mkimage: Check for datafile when type is script Alex Kiernan
[U-Boot] [Feature] Android Fastboot over Ethernet Alex Kiernan
[U-Boot] [Feature] Android Fastboot over Ethernet Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v1 1/5] dfu: Refactor fastboot_okay/fail to take response Alex Kiernan
[U-Boot] [RFC PATCH v1 2/5] dfu: Extract fastboot_okay/fail to fb_common.c Alex Kiernan
[U-Boot] [RFC PATCH v1 3/5] net: dfu: Merge AOSP UDP fastboot Alex Kiernan
[U-Boot] [RFC PATCH v1 4/5] dfu: Resolve Kconfig dependency loops Alex Kiernan
[U-Boot] [RFC PATCH v1 5/5] net: dfu: Support building without MMC Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v1 1/5] dfu: Refactor fastboot_okay/fail to take response Alex Kiernan
[U-Boot] [RFC PATCH v1 2/5] dfu: Extract fastboot_okay/fail to fb_common.c Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v2 00/20] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC PATCH v2 01/20] fastboot: Move fastboot to drivers/fastboot Alex Kiernan
[U-Boot] [RFC PATCH v2 02/20] fastboot: Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT Alex Kiernan
[U-Boot] [RFC PATCH v2 03/20] fastboot: Refactor fastboot_okay/fail to take response Alex Kiernan
[U-Boot] [RFC PATCH v2 04/20] fastboot: Extract fastboot_okay/fail to fb_common.c Alex Kiernan
[U-Boot] [RFC PATCH v2 05/20] fastboot: Introduce fastboot_response and refactor fastboot_okay/fail Alex Kiernan
[U-Boot] [RFC PATCH v2 06/20] fastboot: Correct dependencies in FASTBOOT_FLASH Alex Kiernan
[U-Boot] [RFC PATCH v2 07/20] net: fastboot: Merge AOSP UDP fastboot Alex Kiernan
[U-Boot] [RFC PATCH v2 08/20] net: fastboot: Support building without MMC Alex Kiernan
[U-Boot] [RFC PATCH v2 09/20] fastboot: Refactor write_fb_response into fastboot_okay/fail/response Alex Kiernan
[U-Boot] [RFC PATCH v2 10/20] fastboot: Merge USB and UDP getvar implementation Alex Kiernan
[U-Boot] [RFC PATCH v2 11/20] fastboot: net: Change 'continue' so it matches USB fastboot Alex Kiernan
[U-Boot] [RFC PATCH v2 12/20] fastboot: net: Convert command lookup to a table Alex Kiernan
[U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling Alex Kiernan
[U-Boot] [RFC PATCH v2 14/20] fastboot: Avoid re-parsing cmd_string for boot/reboot Alex Kiernan
[U-Boot] [RFC PATCH v2 15/20] fastboot: Merge boot common across USB and UDP Alex Kiernan
[U-Boot] [RFC PATCH v2 16/20] fastboot: net: Add NAND support Alex Kiernan
[U-Boot] [RFC PATCH v2 17/20] fastboot: Guard getvar:partition-type/size with MMC Alex Kiernan
[U-Boot] [RFC PATCH v2 18/20] fastboot: Check if part_name is NULL before using it Alex Kiernan
[U-Boot] [RFC PATCH v2 19/20] fastboot: Add missing newlines Alex Kiernan
[U-Boot] [RFC PATCH v2 20/20] fastboot: net: Split fastboot protocol out from net Alex Kiernan
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Alex Kiernan
[U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K Matwey V. Kornilov
[U-Boot] [linux-sunxi] Re: [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Peter Korsgaard
[U-Boot] [PATCH] armv8: ls1088aqds: Enable mdio commands on u-boot prompt Ashish Kumar
[U-Boot] [PATCH] armv8: ls1088: Update 1900MT/s DDR timing to bring consistency Ashish Kumar
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Prabhakar Kushwaha
[U-Boot] [PATCH][v2] mtd: nand: fsl_ifc: Fix nand waitfunc return value Prabhakar Kushwaha
[U-Boot] [PATCH v3 1/2] warp7: defconfig: Fix CAAM on boot with tip-of-tree Breno Matheus Lima
[U-Boot] [PATCH v2 07/17] warp7: Specify CONFIG_OPTEE_LOAD_ADDR Breno Matheus Lima
[U-Boot] [PATCH v2 16/17] warp7: defconfig: Enable CMD_SETEXPR Breno Matheus Lima
[U-Boot] [PATCH v2 09/17] warp7: defconfig: Enable CONFIG_BOOTM_TEE Breno Matheus Lima
[U-Boot] [PATCH v2 06/17] warp7: Print out the OPTEE DRAM region Breno Matheus Lima
[U-Boot] [PATCH v2] bootm: Align cache flush begin address Breno Matheus Lima
[U-Boot] [PATCH v3 00/17] warp7: Enable automated OPTEE/HAB boot flow Breno Matheus Lima
[U-Boot] [PATCH v2 2/3] arm: armv7: allow unaligned memory access Leif Lindholm
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section Warner Losh
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section Warner Losh
[U-Boot] coreboot with denverton platforms Francesco Lucconi
[U-Boot] [PATCH] pico-imx7d: Replace fatload command Vanessa Maegima
[U-Boot] [Feature] Android Fastboot over Ethernet Lukasz Majewski
[U-Boot] [PATCH v2 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board Lukasz Majewski
[U-Boot] [PATCH v2 2/2] boot: script: The boot.scr file for K+P's boards Lukasz Majewski
[U-Boot] [PATCH] eth: dm: fec: Change FEC PHY mask setting from CONFIG_PHYLIB to CONFIG_FEC_MXC_PHYADDR Lukasz Majewski
[U-Boot] [PATCH] doc: Update git-mailrc entry for lukma (lukma at denx.de) Lukasz Majewski
[U-Boot] [PULL] Please pull u-boot-imx Lukasz Majewski
[U-Boot] [PATCH] dts: dm: fec: imx53: Provide proper compatible string for imx53 fec driver Lukasz Majewski
[U-Boot] Re-introducing support for OLD hardware Lukasz Majewski
[U-Boot] [Feature] Android Fastboot over Ethernet Lukasz Majewski
[U-Boot] [RFC PATCH v1 1/5] dfu: Refactor fastboot_okay/fail to take response Lukasz Majewski
[U-Boot] [RFC PATCH v1 2/5] dfu: Extract fastboot_okay/fail to fb_common.c Lukasz Majewski
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Lukasz Majewski
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Lukasz Majewski
[U-Boot] [RFC PATCH v1 4/5] dfu: Resolve Kconfig dependency loops Lukasz Majewski
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Lukasz Majewski
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Lukasz Majewski
[U-Boot] [PATCH] dts: imx53: Add gpio and i2c nodes to imx53.dtsi file Lukasz Majewski
[U-Boot] [PATCH] dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl Lukasz Majewski
[U-Boot] [PATCH 1/5] pmic: fsl: Provide some more definitions for MC34708 PMIC Lukasz Majewski
[U-Boot] [PATCH 2/5] pmic: fsl: Define number of bytes sent at once by MC34708 PMIC Lukasz Majewski
[U-Boot] [PATCH 3/5] pmic: dm: Provide *trans_len() callback for pmic-uclass Lukasz Majewski
[U-Boot] [PATCH 4/5] pmic: dm: Rewrite pmic_reg_{read|write} and pmic_clrsetbits to support transmissions larger than 1 byte Lukasz Majewski
[U-Boot] [PATCH 5/5] pmic: dm: Add support for MC34708 for PMIC DM Lukasz Majewski
[U-Boot] [PATCH] arm: imx53: Add support for imx53 boards from K+P Lukasz Majewski
[U-Boot] [PATCH] usb: gadget: composite: fix NULL pointer when a non standard request is received Lukasz Majewski
[U-Boot] [PATCH] usb: f_mass_storage: Fix compile on x86 Lukasz Majewski
[U-Boot] [PATCH v2] usb: f_mass_storage: Fix compile on x86 Lukasz Majewski
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Lukasz Majewski
[U-Boot] [PATCH v3 8/9] usb: f_mass_storage: Fix set_bit and clear_bit usage Lukasz Majewski
[U-Boot] [PATCH v3 0/7] Provide SPL support for bootcount (in the case of using falcon boot mode) Lukasz Majewski
[U-Boot] [PATCH v3 1/7] bootcount: spl: Enable bootcount support in SPL Lukasz Majewski
[U-Boot] [PATCH v3 2/7] bootcount: Add include guards into bootcount.h file Lukasz Majewski
[U-Boot] [PATCH v3 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking Lukasz Majewski
[U-Boot] [PATCH v3 4/7] bootcount: Rewrite autoboot to use wrapper functions from bootcount.h Lukasz Majewski
[U-Boot] [PATCH v3 5/7] bootcount: spl: Extend SPL to support bootcount incrementation Lukasz Majewski
[U-Boot] [PATCH v3 6/7] bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking Lukasz Majewski
[U-Boot] [PATCH v3 7/7] bootcount: display5: config: Enable boot count feature in the display5 board Lukasz Majewski
[U-Boot] [PATCH v3 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu (30.04.2018) Lukasz Majewski
[U-Boot] [PATCH] serial: Remove duplicated line in Makefile Vikas Manocha
[U-Boot] [PATCH] rsa-sign: Fix build against libressl Hauke Mehrtens
[U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8 Bin Meng
[U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support Bin Meng
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Bin Meng
[U-Boot] Question regarding cpu_get_count(..) Bin Meng
[U-Boot] [PATCH v6] x86: Add 64-bit memory-mapped I/O functions Bin Meng
[U-Boot] [PATCH v5 2/2] timer: Add High Precision Event Timers (HPET) support Bin Meng
[U-Boot] [PATCH v6] x86: Add 64-bit memory-mapped I/O functions Bin Meng
[U-Boot] [PATCH] x86: Update the io.h file to use {out|in}_{be|le}X macros Bin Meng
[U-Boot] [PATCH] x86: Update the io.h file to use {out|in}_{be|le}X macros Bin Meng
[U-Boot] [RFC PATCH] net: phy: Don't limit phy addresses by default Bin Meng
[U-Boot] Question regarding cpu_get_count(..) Bin Meng
[U-Boot] [PATCH 1/3] doc: vxworks: Minor update for clarity Bin Meng
[U-Boot] [PATCH 2/3] bootvx: Prepare e820 related stuff from the given kernel memory base address Bin Meng
[U-Boot] [PATCH 3/3] bootvx: Explicitly clear the bootloader image size Bin Meng
[U-Boot] [PATCH 1/4] elf: Clean up the ELF header file Bin Meng
[U-Boot] [PATCH 2/4] elf: Add ELF64 related structure defines Bin Meng
[U-Boot] [PATCH 3/4] elf: Add a very simple elf64 loader Bin Meng
[U-Boot] [PATCH 4/4] doc: vxworks: Mention support of loading 64-bit x86 kernels Bin Meng
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Bin Meng
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Bin Meng
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Bin Meng
[U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8 Bin Meng
[U-Boot] [PATCH] x86: queensbay: switche P state to the highest freq Bin Meng
[U-Boot] [PATCH 3/4] elf: Add a very simple elf64 loader Bin Meng
[U-Boot] [PATCH v2 00/18] bootvx: Various enhancements to booting VxWorks x86 kernels Bin Meng
[U-Boot] [PATCH v2 01/18] doc: vxworks: Minor update for clarity Bin Meng
[U-Boot] [PATCH v2 02/18] bootvx: x86: Prepare e820 related stuff from the given kernel memory base address Bin Meng
[U-Boot] [PATCH v2 03/18] bootvx: x86: Explicitly clear the bootloader image size Bin Meng
[U-Boot] [PATCH v2 04/18] vxworks: x86: Rename e820info to e820_info Bin Meng
[U-Boot] [PATCH v2 05/18] x86: Use 'unsigned int' in install_e820_map() functions Bin Meng
[U-Boot] [PATCH v2 06/18] x86: Rename e820entry to e820_entry Bin Meng
[U-Boot] [PATCH v2 07/18] elf: Clean up the ELF header file Bin Meng
[U-Boot] [PATCH v2 08/18] elf: Add ELF64 related structure defines Bin Meng
[U-Boot] [PATCH v2 09/18] elf: Add a very simple ELF64 loader Bin Meng
[U-Boot] [PATCH v2 10/18] bios: vesa: Guard setting vesa mode with CONFIG_FRAMEBUFFER_SET_VESA_MODE Bin Meng
[U-Boot] [PATCH v2 11/18] video: vesa: Change default FRAMEBUFFER_VESA_MODE Bin Meng
[U-Boot] [PATCH v2 12/18] x86: Change default FRAMEBUFFER_VESA_MODE of some boards Bin Meng
[U-Boot] [PATCH v2 13/18] pci: video: Only print out when everything is OK Bin Meng
[U-Boot] [PATCH v2 14/18] bootvx: x86: Make VxWorks EFI console driver happy Bin Meng
[U-Boot] [PATCH v2 15/18] bootvx: Refactor the bootline copy codes a little bit Bin Meng
[U-Boot] [PATCH v2 16/18] bootvx: Exit if bootline address is not specified Bin Meng
[U-Boot] [PATCH v2 17/18] bootvx: x86: Assign bootaddr based on kernel memory base Bin Meng
[U-Boot] [PATCH v2 18/18] doc: vxworks: Update x86 specific instructions Bin Meng
[U-Boot] [PATCH v2 09/18] elf: Add a very simple ELF64 loader Bin Meng
[U-Boot] [PATCH v2 10/18] bios: vesa: Guard setting vesa mode with CONFIG_FRAMEBUFFER_SET_VESA_MODE Bin Meng
[U-Boot] [PATCH] x86: Rename coreboot-x86 to coreboot Bin Meng
[U-Boot] skylake fsp Bin Meng
[U-Boot] [PATCH v5 2/2] timer: Add High Precision Event Timers (HPET) support Bin Meng
[U-Boot] [PATCH v2 01/18] doc: vxworks: Minor update for clarity Bin Meng
[U-Boot] [PATCH v2 02/18] bootvx: x86: Prepare e820 related stuff from the given kernel memory base address Bin Meng
[U-Boot] [PATCH v2 03/18] bootvx: x86: Explicitly clear the bootloader image size Bin Meng
[U-Boot] [PATCH v2 04/18] vxworks: x86: Rename e820info to e820_info Bin Meng
[U-Boot] [PATCH v2 05/18] x86: Use 'unsigned int' in install_e820_map() functions Bin Meng
[U-Boot] [PATCH v2 06/18] x86: Rename e820entry to e820_entry Bin Meng
[U-Boot] [PATCH v2 07/18] elf: Clean up the ELF header file Bin Meng
[U-Boot] [PATCH v2 08/18] elf: Add ELF64 related structure defines Bin Meng
[U-Boot] [PATCH v2 09/18] elf: Add a very simple ELF64 loader Bin Meng
[U-Boot] [PATCH v2 10/18] bios: vesa: Guard setting vesa mode with CONFIG_FRAMEBUFFER_SET_VESA_MODE Bin Meng
[U-Boot] [PATCH v2 11/18] video: vesa: Change default FRAMEBUFFER_VESA_MODE Bin Meng
[U-Boot] [PATCH v2 12/18] x86: Change default FRAMEBUFFER_VESA_MODE of some boards Bin Meng
[U-Boot] [PATCH v2 13/18] pci: video: Only print out when everything is OK Bin Meng
[U-Boot] [PATCH v2 14/18] bootvx: x86: Make VxWorks EFI console driver happy Bin Meng
[U-Boot] [PATCH v2 15/18] bootvx: Refactor the bootline copy codes a little bit Bin Meng
[U-Boot] [PATCH v2 16/18] bootvx: Exit if bootline address is not specified Bin Meng
[U-Boot] [PATCH v2 17/18] bootvx: x86: Assign bootaddr based on kernel memory base Bin Meng
[U-Boot] [PATCH v2 18/18] doc: vxworks: Update x86 specific instructions Bin Meng
[U-Boot] [PATCH] x86: Rename coreboot-x86 to coreboot Bin Meng
[U-Boot] Please pull u-boot-x86 Bin Meng
[U-Boot] Please pull u-boot-x86 Bin Meng
[U-Boot] Please pull u-boot-x86 (take 2) Bin Meng
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Bin Meng
[U-Boot] [PATCH v5 2/2] timer: Add High Precision Event Timers (HPET) support Bin Meng
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Bin Meng
[U-Boot] coreboot with denverton platforms Bin Meng
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Bin Meng
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Bin Meng
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Bin Meng
[U-Boot] [PATCH] usb: host: dwc3: fix phys init Bin Meng
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Bin Meng
[U-Boot] [PATCH 0/9] Fixup set_bit/clear_bit definition and usage Bin Meng
[U-Boot] Re-introducing support for OLD hardware Jason Mitchell
[U-Boot] Re-introducing support for OLD hardware Jason Mitchell
[U-Boot] [BUG] snow: mmc: SD card access broken: unable to select a mode Anand Moon
[U-Boot] [PATCH v1] arm: mxs: make startup code thumb compatible Christoph Müllner
[U-Boot] [PATCH v2 1/2] arm: make arm926ejs startup code thumb compatible Christoph Müllner
[U-Boot] [PATCH v2 2/2] arm: Make arch specific memcpy thumb-safe. Christoph Müllner
[U-Boot] [PATCH v2 2/2] arm: Make arch specific memcpy thumb-safe. Christoph Müllner
[U-Boot] [PATCH] reset: socfpga: add reset driver for SoCFPGA platform Dinh Nguyen
[U-Boot] [PATCH] reset: socfpga: add reset driver for SoCFPGA platform Dinh Nguyen
[U-Boot] [PATCH 0/6] reset: add reset driver for SoCFPGA Dinh Nguyen
[U-Boot] [PATCHv2 1/6] reset: socfpga: add reset driver for SoCFPGA platform Dinh Nguyen
[U-Boot] [PATCH 2/6] configs: socfpga: convert i2c to dm Dinh Nguyen
[U-Boot] [PATCH 3/6] arm: dts: socfpga: enables i2c0 in socfpga_de0_nano Dinh Nguyen
[U-Boot] [PATCH 4/6] arm: dts: socfpga: add reset property Dinh Nguyen
[U-Boot] [PATCH 5/6] i2c: designware: add reset ctrl to driver Dinh Nguyen
[U-Boot] [PATCH 6/6] configs: socfpga: add DM_RESET Dinh Nguyen
[U-Boot] [PATCHv2 1/6] reset: socfpga: add reset driver for SoCFPGA platform Dinh Nguyen
[U-Boot] [PATCHv2 1/6] reset: socfpga: add reset driver for SoCFPGA platform Dinh Nguyen
[U-Boot] [PATCHv2 1/6] reset: socfpga: add reset driver for SoCFPGA platform Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Dinh Nguyen
[U-Boot] [PATCH] configs: socfpga: disable EFI and ISO partition types Dinh Nguyen
[U-Boot] [PATCHv1 00/14] reset: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 01/14] reset: tegra: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 02/14] reset: sti: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 03/14] reset: uniphier: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 04/14] reset: rockchip: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 05/14] reset: meson: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 06/14] reset: bcm6345: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 07/14] reset: ast2500: remove request function Dinh Nguyen
[U-Boot] [PATCHv1 08/14] reset: socfpga: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 09/14] reset: sandbox: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 10/14] net: dwc_eth_qos: remove reset_free from driver Dinh Nguyen
[U-Boot] [PATCHv1 11/14] phy: bcm63xx: remove reset_free function Dinh Nguyen
[U-Boot] [PATCHv1 12/14] usb: ehci/ohci: remove reset_free function Dinh Nguyen
[U-Boot] [PATCHv1 13/14] reset: test: remove sandbox_reset_test_free function Dinh Nguyen
[U-Boot] [PATCHv1 14/14] reset: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 14/14] reset: remove request and free functions Dinh Nguyen
[U-Boot] [PATCHv1 14/14] reset: remove request and free functions Dinh Nguyen
[U-Boot] [RFC] spl: dw_mmc_socfpga: udevice structure is NULL in SPL Dinh Nguyen
[U-Boot] [RFC] spl: dw_mmc_socfpga: udevice structure is NULL in SPL Dinh Nguyen
[U-Boot] [PATCH 2/2] image: fit: Show information about OS type in firwmare case too Jun Nie
[U-Boot] [PATCH 1/2] image: fit: Show firmware configuration property if present Jun Nie
[U-Boot] uboot support to Allwinner bananapi zero Jun Nie
[U-Boot] [PATCH] fit: skip signature verification if board request Jun Nie
[U-Boot] [PATCH] fit: skip signature verification if board request Jun Nie
[U-Boot] [PATCH] fit: skip signature verification if board request Jun Nie
[U-Boot] [PATCH] fit: skip signature verification if board request Jun Nie
[U-Boot] [PATCH] fit: skip signature verification if board request Jun Nie
[U-Boot] chiliSOM: USB bug Marcin Niestroj
[U-Boot] chiliSOM: USB bug Marcin Niestroj
[U-Boot] chiliSOM: USB bug Marcin Niestroj
[U-Boot] chiliSOM: USB bug Marcin Niestroj
[U-Boot] chiliSOM: USB bug Marcin Niestrój
[U-Boot] [PATCH] sf: Add Spansion s25fl208k entry Sean Nyekjaer
[U-Boot] [PATCH] imx: mx6: add is_boot_from_usb define Sean Nyekjaer
[U-Boot] [PATCH] imx: mx6: add is_boot_from_usb define Sean Nyekjær
[U-Boot] [PATCH v2 00/17] warp7: Enable automated OPTEE/HAB boot flow Bryan O'Donoghue
[U-Boot] [PATCH v2 01/17] imximage: Specify default IVT offset in IMX image Bryan O'Donoghue
[U-Boot] [PATCH v2 02/17] warp7: hab: Add a CSF location definition Bryan O'Donoghue
[U-Boot] [PATCH v2 03/17] warp7: hab: Set environment variable indicating HAB enable Bryan O'Donoghue
[U-Boot] [PATCH v2 04/17] warp7: defconfig: Enable OPTEE for WaRP7 Bryan O'Donoghue
[U-Boot] [PATCH v2 05/17] warp7: Allocate specific region of memory to OPTEE Bryan O'Donoghue
[U-Boot] [PATCH v2 06/17] warp7: Print out the OPTEE DRAM region Bryan O'Donoghue
[U-Boot] [PATCH v2 07/17] warp7: Specify CONFIG_OPTEE_LOAD_ADDR Bryan O'Donoghue
[U-Boot] [PATCH v2 08/17] warp7: defconfig: Enable CONFIG_SECURE_BOOT Bryan O'Donoghue
[U-Boot] [PATCH v2 09/17] warp7: defconfig: Enable CONFIG_BOOTM_TEE Bryan O'Donoghue
[U-Boot] [PATCH v2 10/17] warp7: Make CONFIG_SYS_FDT_ADDR a define Bryan O'Donoghue
[U-Boot] [PATCH v2 11/17] warp7: Add Kconfig WARP7_ROOT_PART Bryan O'Donoghue
[U-Boot] [PATCH v2 12/17] warp7: select uuid partition based on rootpart Bryan O'Donoghue
[U-Boot] [PATCH v2 13/17] warp7: Define the name of a signed boot-script file Bryan O'Donoghue
[U-Boot] [PATCH v2 14/17] warp7: add warp7_auth_or_fail Bryan O'Donoghue
[U-Boot] [PATCH v2 15/17] warp7: hab: Set environment variable indicating IVT offset Bryan O'Donoghue
[U-Boot] [PATCH v2 16/17] warp7: defconfig: Enable CMD_SETEXPR Bryan O'Donoghue
[U-Boot] [PATCH v2 17/17] warp7: Add support for automated secure boot.scr verification Bryan O'Donoghue
[U-Boot] [PATCH] imx: mx7: snvs: Add an SNVS init routine Bryan O'Donoghue
[U-Boot] [PATCH] imx: mx7: snvs: Add an SNVS init routine Bryan O'Donoghue
[U-Boot] [PATCH] imx: mx7: snvs: Add an SNVS init routine Bryan O'Donoghue
[U-Boot] [PATCH v2 06/17] warp7: Print out the OPTEE DRAM region Bryan O'Donoghue
[U-Boot] [PATCH v2 09/17] warp7: defconfig: Enable CONFIG_BOOTM_TEE Bryan O'Donoghue
[U-Boot] [PATCH] bootm: Align cache flush begin address Bryan O'Donoghue
[U-Boot] [PATCH v2 07/17] warp7: Specify CONFIG_OPTEE_LOAD_ADDR Bryan O'Donoghue
[U-Boot] [PATCH v3 00/17] warp7: Enable automated OPTEE/HAB boot flow Bryan O'Donoghue
[U-Boot] [PATCH v3 01/17] imximage: Specify default IVT offset in IMX image Bryan O'Donoghue
[U-Boot] [PATCH v3 02/17] warp7: hab: Add a CSF location definition Bryan O'Donoghue
[U-Boot] [PATCH v3 03/17] warp7: hab: Set environment variable indicating HAB enable Bryan O'Donoghue
[U-Boot] [PATCH v3 04/17] warp7: defconfig: Enable OPTEE for WaRP7 Bryan O'Donoghue
[U-Boot] [PATCH v3 05/17] warp7: Allocate specific region of memory to OPTEE Bryan O'Donoghue
[U-Boot] [PATCH v3 06/17] warp7: Print out the OPTEE DRAM region Bryan O'Donoghue
[U-Boot] [PATCH v3 07/17] warp7: Specify CONFIG_OPTEE_LOAD_ADDR Bryan O'Donoghue
[U-Boot] [PATCH v3 08/17] warp7: defconfig: Enable CONFIG_SECURE_BOOT Bryan O'Donoghue
[U-Boot] [PATCH v3 09/17] warp7: defconfig: Enable CONFIG_BOOTM_TEE Bryan O'Donoghue
[U-Boot] [PATCH v3 10/17] warp7: Make CONFIG_SYS_FDT_ADDR a define Bryan O'Donoghue
[U-Boot] [PATCH v3 11/17] warp7: Add Kconfig WARP7_ROOT_PART Bryan O'Donoghue
[U-Boot] [PATCH v3 12/17] warp7: select uuid partition based on rootpart Bryan O'Donoghue
[U-Boot] [PATCH v3 13/17] warp7: Define the name of a signed boot-script file Bryan O'Donoghue
[U-Boot] [PATCH v3 14/17] warp7: add warp7_auth_or_fail Bryan O'Donoghue
[U-Boot] [PATCH v3 15/17] warp7: hab: Set environment variable indicating IVT offset Bryan O'Donoghue
[U-Boot] [PATCH v3 16/17] warp7: defconfig: Enable CMD_SETEXPR Bryan O'Donoghue
[U-Boot] [PATCH v3 17/17] warp7: Add support for automated secure boot.scr verification Bryan O'Donoghue
[U-Boot] [PATCH] bootm: Align cache flush begin address Bryan O'Donoghue
[U-Boot] [PATCH v2] bootm: Align cache flush begin address Bryan O'Donoghue
[U-Boot] [PATCH v2] bootm: Align cache flush begin address Bryan O'Donoghue
[U-Boot] [PATCH v2] bootm: Align cache flush begin address Bryan O'Donoghue
[U-Boot] [PATCH] mx7dsabresd: Remove the mx7dsabresd_secure_defconfig target Bryan O'Donoghue
[U-Boot] [PATCH] tools/imximage: Fix fruity lack of 0x prefix in DCD Blocks Bryan O'Donoghue
[U-Boot] [PATCH v4 0/3] WaRP7 unify secure and non-secure defconfigs Bryan O'Donoghue
[U-Boot] [PATCH v4 1/3] warp7: defconfig: Fix CAAM on boot with tip-of-tree Bryan O'Donoghue
[U-Boot] [PATCH v4 2/3] warp7: secure_defconfig: Remove secure_defconfig Bryan O'Donoghue
[U-Boot] [PATCH v4 3/3] warp7: configs: enable CONFIG_CMD_FS_GENERIC Bryan O'Donoghue
[U-Boot] [PATCH v4 2/3] warp7: secure_defconfig: Remove secure_defconfig Bryan O'Donoghue
[U-Boot] [PATCH v5 0/3] WaRP7 unify secure and non-secure defconfigs Bryan O'Donoghue
[U-Boot] [PATCH v5 1/3] warp7: defconfig: Fix CAAM on boot with tip-of-tree Bryan O'Donoghue
[U-Boot] [PATCH v5 2/3] warp7: secure_defconfig: Remove secure_defconfig Bryan O'Donoghue
[U-Boot] [PATCH v5 3/3] warp7: configs: enable CONFIG_CMD_FS_GENERIC Bryan O'Donoghue
[U-Boot] [PATCH v4 00/18] warp7: Enable automated OPTEE/HAB boot flow Bryan O'Donoghue
[U-Boot] [PATCH v4 01/18] tools/imximage: Fix fruity lack of 0x prefix in DCD Blocks Bryan O'Donoghue
[U-Boot] [PATCH v4 02/18] imximage: Specify default IVT offset in IMX image Bryan O'Donoghue
[U-Boot] [PATCH v4 03/18] warp7: hab: Add a CSF location definition Bryan O'Donoghue
[U-Boot] [PATCH v4 04/18] warp7: hab: Set environment variable indicating HAB enable Bryan O'Donoghue
[U-Boot] [PATCH v4 05/18] warp7: defconfig: Enable OPTEE for WaRP7 Bryan O'Donoghue
[U-Boot] [PATCH v4 06/18] warp7: Allocate specific region of memory to OPTEE Bryan O'Donoghue
[U-Boot] [PATCH v4 07/18] warp7: Print out the OPTEE DRAM region Bryan O'Donoghue
[U-Boot] [PATCH v4 08/18] warp7: Specify CONFIG_OPTEE_LOAD_ADDR Bryan O'Donoghue
[U-Boot] [PATCH v4 09/18] warp7: defconfig: Enable CONFIG_SECURE_BOOT Bryan O'Donoghue
[U-Boot] [PATCH v4 10/18] warp7: defconfig: Enable CONFIG_BOOTM_TEE Bryan O'Donoghue
[U-Boot] [PATCH v4 11/18] warp7: Make CONFIG_SYS_FDT_ADDR a define Bryan O'Donoghue
[U-Boot] [PATCH v4 12/18] warp7: Add Kconfig WARP7_ROOT_PART Bryan O'Donoghue
[U-Boot] [PATCH v4 13/18] warp7: select uuid partition based on rootpart Bryan O'Donoghue
[U-Boot] [PATCH v4 14/18] warp7: Define the name of a signed boot-script file Bryan O'Donoghue
[U-Boot] [PATCH v4 15/18] warp7: add warp7_auth_or_fail Bryan O'Donoghue
[U-Boot] [PATCH v4 16/18] warp7: hab: Set environment variable indicating IVT offset Bryan O'Donoghue
[U-Boot] [PATCH v4 17/18] warp7: defconfig: Enable CMD_SETEXPR Bryan O'Donoghue
[U-Boot] [PATCH v4 18/18] warp7: Add support for automated secure boot.scr verification Bryan O'Donoghue
[U-Boot] [PATCH] usb: f_mass_storage: Fix compile on x86 Bryan O'Donoghue
[U-Boot] [PATCH] usb: f_mass_storage: Fix compile on x86 Bryan O'Donoghue
[U-Boot] [PATCH v2] usb: f_mass_storage: Fix compile on x86 Bryan O'Donoghue
[U-Boot] [PATCH v2] usb: f_mass_storage: Fix compile on x86 Bryan O'Donoghue
[U-Boot] [PATCH 0/9] Fixup set_bit/clear_bit definition and usage Bryan O'Donoghue
[U-Boot] [PATCH 1/9] x86: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH 2/9] riscv: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH 3/9] riscv: : Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH 4/9] nios2: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH 5/9] nios2: : Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH 6/9] nds32: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH 7/9] nds2: : Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 8/9] usb: f_mass_storage: Fix set_bit and clear_bit usage Bryan O'Donoghue
[U-Boot] [PATCH 9/9] usb: composite convert __set_bit to generic_set_bit Bryan O'Donoghue
[U-Boot] [PATCH v2 0/9] Fixup set_bit/clear_bit definition and usage Bryan O'Donoghue
[U-Boot] [PATCH v2 1/9] x86: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v2 2/9] riscv: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v2 3/9] riscv: Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH v2 4/9] nios2: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v2 5/9] nios2: Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH v2 6/9] nds32: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v2 7/9] nds32: Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH v2 8/9] usb: f_mass_storage: Fix set_bit and clear_bit usage Bryan O'Donoghue
[U-Boot] [PATCH v2 9/9] usb: composite convert __set_bit to generic_set_bit Bryan O'Donoghue
[U-Boot] [PATCH v3 8/9] usb: f_mass_storage: Fix set_bit and clear_bit usage Bryan O'Donoghue
[U-Boot] [PATCH 0/9] Fixup set_bit/clear_bit definition and usage Bryan O'Donoghue
[U-Boot] [PATCH v3 0/9] Fixup set_bit/clear_bit definition and usage Bryan O'Donoghue
[U-Boot] [PATCH v3 1/9] x86: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 2/9] riscv: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 3/9] riscv: Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 4/9] nios2: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 5/9] nios2: Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 6/9] nds32: Define PLATFORM__SET_BIT for generic_set_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 7/9] nds32: Define PLATFORM__CLEAR_BIT for generic_clear_bit() Bryan O'Donoghue
[U-Boot] [PATCH v3 8/9] usb: f_mass_storage: Fix set_bit and clear_bit usage Bryan O'Donoghue
[U-Boot] [PATCH v3 9/9] usb: composite convert __set_bit to generic_set_bit Bryan O'Donoghue
[U-Boot] [PATCH 0/8] Initial integration of AVB2.0 Igor Opaniuk
[U-Boot] [PATCH 1/8] avb2.0: add Android Verified Boot 2.0 libraries Igor Opaniuk
[U-Boot] [PATCH 2/8] avb2.0: integrate avb 2.0 into the build system Igor Opaniuk
[U-Boot] [PATCH 3/8] avb2.0: implement AVB ops Igor Opaniuk
[U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification Igor Opaniuk
[U-Boot] [PATCH 5/8] avb2.0: add boot states and dm-verity support Igor Opaniuk
[U-Boot] [PATCH 6/8] am57xx_hs: avb2.0: add support of AVB 2.0 Igor Opaniuk
[U-Boot] [PATCH 7/8] test/py: avb2.0: add tests for avb commands Igor Opaniuk
[U-Boot] [PATCH 8/8] doc: avb2.0: add README about AVB2.0 integration Igor Opaniuk
[U-Boot] [PATCH 0/8] Initial integration of AVB2.0 Igor Opaniuk
[U-Boot] [PATCH 0/8] Initial integration of AVB2.0 Igor Opaniuk
[U-Boot] Marvell Armada-38x DDR training code Chris Packham
[U-Boot] [PATCH v1 0/2] ARM: mvebu: a38x: updates Chris Packham
[U-Boot] [PATCH v1 1/2] ARM: mvebu: a38x: move definition of PEX_CFG_DIRECT_ACCESS Chris Packham
[U-Boot] [PATCH v1 2/2] ARM: mvebu: a38x: move sys_env_device_rev_get Chris Packham
[U-Boot] Marvell Armada-38x DDR training code Chris Packham
[U-Boot] [PATCH v2 0/6] ARM: mvebu: a38x: updates to ddr training code Chris Packham
[U-Boot] [PATCH v2 1/6] ARM: mvebu: a38x: move definition of PEX_CFG_DIRECT_ACCESS Chris Packham
[U-Boot] [PATCH v2 2/6] ARM: mvebu: a38x: move sys_env_device_rev_get Chris Packham
[U-Boot] [PATCH v2 3/6] ARM: mvebu: a38x: remove some unused code Chris Packham
[U-Boot] [PATCH v2 4/6] ARM: mvebu: a38x: sync ddr training code with upstream Chris Packham
[U-Boot] [PATCH v2 5/6] ARM: mvebu: a38x: restore support for setting timing Chris Packham
[U-Boot] [PATCH v2 6/6] ARM: mvebu: a38x: use non-zero size for ddr scrubbing Chris Packham
[U-Boot] Make error in U-boot branch v2015.10-rc5 Chris Packham
[U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion Chris Packham
[U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion Chris Packham
[U-Boot] [PATCH 1/2] net: Add Kconfig option for BOOTP_NTPSERVER Chris Packham
[U-Boot] [PATCH 2/2] net: bootp: Fix compile error processing ntpserver option Chris Packham
[U-Boot] [RFC PATCH 1/2] fpga: xilinx: zynq: Add support to decrypt images Siva Durga Prasad Paladugu
[U-Boot] [RFC PATCH 2/2] zynq: Add support for loading secure images Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 1/7] mmc: sdhci: Add support for disabling clock Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 2/7] mmc: sdhci: Handle execute tuning command in sdhci_send_command Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 3/7] sdhci: Add new sdhci ops for platform specific tuning and delays Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 4/7] mmc: sdhci: Invoke platform specific tuning and delay routines Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 5/7] mmc : sdhci: Read capabilities register1 and update host caps Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 6/7] mmc: zynq_sdhci: Add support for SD3.0 Siva Durga Prasad Paladugu
[U-Boot] [UBOOT PATCH v3 7/7] zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 1/2] SPI Flash: add support of sst26wf* flash series Eugeniy Paltsev
[U-Boot] [PATCH v3 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064 Eugeniy Paltsev
[U-Boot] [PATCH v3 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops Eugeniy Paltsev
[U-Boot] [PATCH v3 2/2] SF: add support for sst26wf016, sst26wf032, sst26wf064 Eugeniy Paltsev
[U-Boot] [PATCH v4 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064 Eugeniy Paltsev
[U-Boot] [PATCH v4 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops Eugeniy Paltsev
[U-Boot] [PATCH v4 2/2] SF: add support for sst26wf016, sst26wf032, sst26wf064 Eugeniy Paltsev
[U-Boot] [PATCH v4 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops Eugeniy Paltsev
[U-Boot] [PATCH v5 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064 Eugeniy Paltsev
[U-Boot] [PATCH v5 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops Eugeniy Paltsev
[U-Boot] [PATCH v5 2/2] SF: add support for sst26wf016, sst26wf032, sst26wf064 Eugeniy Paltsev
[U-Boot] [PATCH v5 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops Eugeniy Paltsev
[U-Boot] [PATCH v5 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops Eugeniy Paltsev
[U-Boot] [PATCH] ARC: HSDK: fix cpu frequency value Eugeniy Paltsev
[U-Boot] [PATCH] ARC: AXS10x: enable hush shell Eugeniy Paltsev
[U-Boot] [PATCH] ARC: update ARC architecture maintainers Eugeniy Paltsev
[U-Boot] [PATCH] ARC: remove unused DECLARE_GLOBAL_DATA_PTR from init_helpers.c Eugeniy Paltsev
[U-Boot] [PATCH] DW SPI: invert wait condition in dw_spi_xfer Eugeniy Paltsev
[U-Boot] [PATCH] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v2] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v2] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v3] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v3] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v3] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v3] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v4] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v4] arm64: Add SMC and HVC commands Michalis Pappas
[U-Boot] [PATCH v2] mmc: mv_sdhci: zero out sdhci_host structure Matt Pelland
[U-Boot] [U-Boot, v3] imximage: Remove failure when no IVT offset is found Trent Piepho
[U-Boot] [PATCH] imx: Create distinct pre-processed mkimage config files Trent Piepho
[U-Boot] [PATCH] power: pmic: Let PFUZE3000 see all 256 registers Trent Piepho
[U-Boot] CFI flash broken for 8-bit bus Radovan Prodanovic
[U-Boot] [PATCH 0/5] Use Android DT image format for TI boards Sam Protsenko
[U-Boot] [PATCH 1/5] common: Add support for Android DT image Sam Protsenko
[U-Boot] [PATCH 2/5] cmd: Add dtimg command Sam Protsenko
[U-Boot] [PATCH 3/5] arm: ti: boot: Extract PARTS_DEFAULT to boot.h Sam Protsenko
[U-Boot] [PATCH 4/5] arm: ti: boot: Add dtbo partition for Android boot Sam Protsenko
[U-Boot] [PATCH 5/5] arm: ti: boot: Implement Android boot using DT image format Sam Protsenko
[U-Boot] [PATCH 0/5] Use Android DT image format for TI boards Sam Protsenko
[U-Boot] [PATCH 0/5] Use Android DT image format for TI boards Sam Protsenko
[U-Boot] [PATCH 1/5] common: Add support for Android DT image Sam Protsenko
[U-Boot] [PATCH 2/5] cmd: Add dtimg command Sam Protsenko
[U-Boot] [PATCH 3/5] arm: ti: boot: Extract PARTS_DEFAULT to boot.h Sam Protsenko
[U-Boot] [PATCH 4/5] arm: ti: boot: Add dtbo partition for Android boot Sam Protsenko
[U-Boot] [PATCH 4/5] arm: ti: boot: Add dtbo partition for Android boot Sam Protsenko
[U-Boot] [PATCH 5/5] arm: ti: boot: Implement Android boot using DT image format Sam Protsenko
[U-Boot] [PATCH v2 1/2] common: Add support for Android DT image Sam Protsenko
[U-Boot] [PATCH v2 2/2] cmd: Add dtimg command Sam Protsenko
[U-Boot] [PATCH v2] arm: ti: boot: Extract PARTS_DEFAULT to boot.h Sam Protsenko
[U-Boot] [PATCH 1/2] configs: TI: Enable FIT Library overlay support Sam Protsenko
[U-Boot] [PATCH 2/2] env: ti: android: boot with FIT Image Sam Protsenko
[U-Boot] [PATCH 6/6] cmd: Add "boot_android" command. Sam Protsenko
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Sam Protsenko
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Andre Przywara
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Andre Przywara
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Andre Przywara
[U-Boot] [PATCH v5 00/11] sunxi: update H3/H5/A64 EMAC DT nodes Andre Przywara
[U-Boot] [PATCH v5 01/11] sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware Andre Przywara
[U-Boot] [PATCH v5 02/11] sunxi: gpio: add missing compatible strings Andre Przywara
[U-Boot] [PATCH v5 03/11] net: sun8i-emac: support new pinctrl DT bindings Andre Przywara
[U-Boot] [PATCH v5 04/11] net: sun8i-emac: add support for new EMAC DT binding Andre Przywara
[U-Boot] [PATCH v5 05/11] arm: dts: sunxi: update A64 to new EMAC binding Andre Przywara
[U-Boot] [PATCH v5 06/11] arm: dts: sunxi: update H3 to new EMAC binding Andre Przywara
[U-Boot] [PATCH v5 07/11] arm: dts: sunxi: update H5 to new EMAC binding Andre Przywara
[U-Boot] [PATCH v5 08/11] net: sun8i-emac: remove support for old binding Andre Przywara
[U-Boot] [PATCH v5 09/11] sunxi: disable direct MMC environment Andre Przywara
[U-Boot] [PATCH v5 10/11] sunxi: revert disabling of features Andre Przywara
[U-Boot] [PATCH v5 11/11] Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT" Andre Przywara
[U-Boot] [PATCH v5 09/11] sunxi: disable direct MMC environment Andre Przywara
[U-Boot] [PATCH v5 00/11] sunxi: update H3/H5/A64 EMAC DT nodes Andre Przywara
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Andre Przywara
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Andre Przywara
[U-Boot] [linux-sunxi] Re: [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux André Przywara
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK André Przywara
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK André Przywara
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux André Przywara
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux André Przywara
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux André Przywara
[U-Boot] [linux-sunxi] Re: [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot André Przywara
[U-Boot] FIT Image with same kernel but different load/entry point Clément Péron
[U-Boot] FIT Image with same kernel but different load/entry point Clément Péron
[U-Boot] FIT Image with same kernel but different load/entry point Clément Péron
[U-Boot] [PATCH] image: Display FIT signature for configs Clément Péron
[U-Boot] image: Display FIT signature for configs Clément Péron
[U-Boot] [PATCH] image: fit: Show signatures and hashes for configurations Clément Péron
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Jorge Ramirez-Ortiz
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Jorge Ramirez-Ortiz
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Jorge Ramirez-Ortiz
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Jorge Ramirez-Ortiz
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Jorge Ramirez-Ortiz
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Jorge Ramirez-Ortiz
[U-Boot] [PATCH v2 10/19] tpm: add TPM2_SelfTest command support Miquel Raynal
[U-Boot] [PATCH v2 03/19] tpm: add support for TPMv2 SPI modules Miquel Raynal
[U-Boot] [PATCH v2 11/19] tpm: add TPM2_Clear command support Miquel Raynal
[U-Boot] [PATCH v2 11/19] tpm: add TPM2_Clear command support Miquel Raynal
[U-Boot] [PATCH v2 09/19] tpm: add TPM2_Startup command support Miquel Raynal
[U-Boot] [PATCH v2 07/19] tpm: add possible traces to analyze buffers returned by the TPM Miquel Raynal
[U-Boot] [PATCH v2 10/19] tpm: add TPM2_SelfTest command support Miquel Raynal
[U-Boot] [PATCHv2] board: ge: bx50v3: enable backlight on demand Sebastian Reichel
[U-Boot] [PATCH] board: ge: bx50v3: add winbond SPI NOR support Sebastian Reichel
[U-Boot] [PATCH] ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfig Sebastian Reichel
[U-Boot] [PATCHv1 0/7] Merge B850v3, B650v3 and B450v3 targets Sebastian Reichel
[U-Boot] [PATCHv1 1/7] board: ge: bx50v3: rename detect_baseboard function Sebastian Reichel
[U-Boot] [PATCHv1 2/7] board: ge: bx50v3: unify two switch statements Sebastian Reichel
[U-Boot] [PATCHv1 3/7] board: ge: bx50v3: fix display support for b{46}50v3 Sebastian Reichel
[U-Boot] [PATCHv1 4/7] board: ge: bx50v3: detect the monitor type by reading VPD earlier Sebastian Reichel
[U-Boot] [PATCHv1 5/7] board: ge: bx50v3: use VPD instead of compile-time checks Sebastian Reichel
[U-Boot] [PATCHv1 6/7] board: ge: bx50v3: configure video arguments using VPD Sebastian Reichel
[U-Boot] [PATCHv1 7/7] board: ge: bx50v3: remove redundant targets Sebastian Reichel
[U-Boot] [PULL] Please pull from u-boot-rockchip Tom Rini
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Tom Rini
[U-Boot] Uboot send pull request Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] Please pull u-.boot-marvell/master Tom Rini
[U-Boot] [PATCH v2 1/2] ARC: HSDK: add platform-specific commands Tom Rini
[U-Boot] [PATCH] arm: stm32mp1: add PSCI support Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] [ANN] U-Boot v2018.05-rc1 released Tom Rini
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Tom Rini
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Tom Rini
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Tom Rini
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Tom Rini
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Tom Rini
[U-Boot] [PATCH] Makefile: Disable stack-usage check for ARC Tom Rini
[U-Boot] Please pull ARC changes for 2018.05 Tom Rini
[U-Boot] Please pull ARC changes for 2018.05 Tom Rini
[U-Boot] Pull request: u-boot-sunxi/master Tom Rini
[U-Boot] [PULL] efi patch queue 2018-04-06 Tom Rini
[U-Boot] [PULL] rpi patch queue 2018-04-06 Tom Rini
[U-Boot] [PATCH 1/2] imx31_phycore: Delete Tom Rini
[U-Boot] [PATCH 2/2] mx31ads: Delete Tom Rini
[U-Boot] [U-Boot,01/14] spi: atmel: Add ifdef for DM_GPIO code Tom Rini
[U-Boot] [U-Boot,02/14] at91: gurnard: Enable DM_SPI Tom Rini
[U-Boot] [U-Boot, 03/14] configs: gurnard: Move CONFIG_ATMEL_SPI to defconfigs Tom Rini
[U-Boot] [U-Boot,04/14] at91: taurus: Enable DM_SPI Tom Rini
[U-Boot] [U-Boot,05/14] at91: vinco: Enable DM Tom Rini
[U-Boot] [U-Boot,06/14] at91: vinco: Add FDT support Tom Rini
[U-Boot] [U-Boot,07/14] at91: vinco: Enable DM_SPI Tom Rini
[U-Boot] [U-Boot,08/14] at91: ma5d4evk: Enable DM Tom Rini
[U-Boot] [U-Boot,09/14] at91: ma5d4evk: Add FDT support Tom Rini
[U-Boot] [U-Boot,10/14] at91: ma5d4evk: Enable DM_SPI Tom Rini
[U-Boot] [U-Boot, 11/14] at91: ma5d4evk: Enable SPL_DM and SPL_OF_CONTROL Tom Rini
[U-Boot] [U-Boot,12/14] spi: atmel: Drop non-dm code Tom Rini
[U-Boot] [U-Boot,13/14] spi: atmel: Drop atmel_spi.h Tom Rini
[U-Boot] [U-Boot, 14/14] spi: atmel: default y if DM_SPI && ARCH_AT91 Tom Rini
[U-Boot] [U-Boot, v4, 01/16] soft_i2c: cleanup - no mpc8xx support Tom Rini
[U-Boot] [U-Boot, v4, 02/16] powerpc: mpc8xx: harmonise initialisation of the immap local pointer Tom Rini
[U-Boot] [U-Boot, v4, 03/16] powerpc: mpc8xx: get rid of the multiple PVR_ values Tom Rini
[U-Boot] [U-Boot, v4, 04/16] powerpc: mpc8xx: make get_immr() independent of CONFIG_8xx Tom Rini
[U-Boot] [U-Boot, v4, 05/16] powerpc: mpc8xx: remove get_immr() argument Tom Rini
[U-Boot] [U-Boot, v4, 06/16] powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx Tom Rini
[U-Boot] [U-Boot,v4,07/16] powercp: mpc8xx: move commproc.h Tom Rini
[U-Boot] [U-Boot, v4, 08/16] powerpc: mpc8xx: redistribute data in CPM dpram Tom Rini
[U-Boot] [U-Boot, v4, 09/16] powerpc: mpc8xx: initialisation of initial RAM Tom Rini
[U-Boot] [U-Boot, v4, 10/16] board: MCR3000: replace mtd->priv by mtd_to_nand() Tom Rini
[U-Boot] [U-Boot,v4,11/16] board: MCR3000: cleanup config Tom Rini
[U-Boot] [U-Boot, v4, 12/16] common: env_embedded: allow fine placement of environment object Tom Rini
[U-Boot] [U-Boot, v4, 13/16] board: MCR3000: Use smaller flash sector for environment Tom Rini
[U-Boot] [U-Boot, v4, 14/16] powerpc: mpc8xx: refactorise reginfo Tom Rini
[U-Boot] [U-Boot, v4, 15/16] powerpc: mpc8xx: cleaning up watchdog Tom Rini
[U-Boot] [U-Boot, v4, 16/16] powerpc: mpc8xx: move watchdog into drivers/watchdog Tom Rini
[U-Boot] [U-Boot, 1/4] Add support for BeagleBoard.org PocketBeagle Tom Rini
[U-Boot] [U-Boot,3/4] Handle NETCONSOLE and SPL enabled Tom Rini
[U-Boot] [U-Boot, 4/4] am335x: am335x_evm_usbspl_defconfig: NETCONSOLE Tom Rini
[U-Boot] Migrate CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC Tom Rini
[U-Boot] drivers: serial: remove nonexisting initialisation functions Tom Rini
[U-Boot] [U-Boot, v3, 2/2] am43xx: Do not allow EMIF to control DDR_RESET in rtconly config Tom Rini
[U-Boot] [U-Boot, v4, 1/2] ARM: AM43xx: Add support for RTC only + DDR in self-refresh mode Tom Rini
[U-Boot] fs: btrfs: Remove unused debug code left from development Tom Rini
[U-Boot] input: Drop PS/2 keyboard support Tom Rini
[U-Boot] ARM: am33xx: Inhibit re-initialization of DDR during RTC-only Tom Rini
[U-Boot] omap3_logic: Fix FDT ADDR for ramdisk booting Tom Rini
[U-Boot] [U-Boot,12/14] spi: atmel: Drop non-dm code Tom Rini
[U-Boot] [U-Boot,13/14] spi: atmel: Drop atmel_spi.h Tom Rini
[U-Boot] [U-Boot, 1/1] regulator: pbias: don't evaluate variable before assignment Tom Rini
[U-Boot] [U-Boot, v3] tools/mxsimage: Support building with LibreSSL Tom Rini
[U-Boot] [U-Boot,1/2] stm32mp: cleanup cpu.c Tom Rini
[U-Boot] [U-Boot,2/2] stm32mp: add check of cpu identifier Tom Rini
[U-Boot] [U-Boot,v3] rtc: rewrite isl1208 to support DM Tom Rini
[U-Boot] [U-Boot, 1/4] spl: spl_mmc: provide one weak function spl_boot_partition Tom Rini
[U-Boot] [U-Boot,2/4] stm32mp1: add eMMC support for ED1 Tom Rini
[U-Boot] [U-Boot,3/4] stm32mp1: get boot mode from BootRom Tom Rini
[U-Boot] [U-Boot, 4/4] stm32mp1: select boot device and partition Tom Rini
[U-Boot] [U-Boot, v2] Allow providing default environment from file Tom Rini
[U-Boot] [U-Boot, 1/4] arm: timer: get frequency for arch timer armv7 in cp15 cntfrq Tom Rini
[U-Boot] [U-Boot, 3/4] clock: stm32mp1: add stgen clock source change support Tom Rini
[U-Boot] [U-Boot, 4/4] stm32mp1: change STGEN clock source to HSE Tom Rini
[U-Boot] [U-Boot,2/4] stm32mp: add syscon for STGEN Tom Rini
[U-Boot] stm32mp: handle SYSRESET Tom Rini
[U-Boot] bootvx: use program header for loading Tom Rini
[U-Boot] [U-Boot, v1, 1/5] rtc: ds1307: remove redundant code in rtc_reset Tom Rini
[U-Boot] [U-Boot, v1, 2/5] rtc: ds1374: remove redundant code in rtc_reset Tom Rini
[U-Boot] [U-Boot, v1, 3/5] rtc: mx27rtc: remove redundant code in rtc_reset Tom Rini
[U-Boot] [U-Boot, v1, 4/5] rtc: rs5c372: remove redundant code in rtc_reset Tom Rini
[U-Boot] [U-Boot, v1, 5/5] rtc: rx8025: remove redundant code in rtc_reset Tom Rini
[U-Boot] [U-Boot, 1/3] configs: k2g_hs_evm: Resync defconfig with non-HS defconfig Tom Rini
[U-Boot] [U-Boot, 2/3] configs: k2e_hs_evm: Resync defconfig with non-HS defconfig Tom Rini
[U-Boot] [U-Boot, 3/3] configs: k2hk_hs_evm: Resync defconfig with non-HS defconfig Tom Rini
[U-Boot] env: Properly check for BLK support Tom Rini
[U-Boot] [U-Boot, 1/3] board: ti: am43xx: Define embedded_dtb_select for runtime DTB selection in U-boot Tom Rini
[U-Boot] [U-Boot, 2/3] ARM: dts: Add new "generic" am4372 device tree file. Tom Rini
[U-Boot] [U-Boot, 3/3] configs: am43xx_evm_qspiboot_defconfig: Move to DM Tom Rini
[U-Boot] [U-Boot, 1/2] image: fit: Show firmware configuration property if present Tom Rini
[U-Boot] [U-Boot, 2/2] image: fit: Show information about OS type in firwmare case too Tom Rini
[U-Boot] watchdog: Fix Kconfig alignment for WDT_SANDBOX Tom Rini
[U-Boot] gpio: uclass: Fix debug string Tom Rini
[U-Boot] cmd: ximg: Respect cache line size for flushing Tom Rini
[U-Boot] cmd: Add command for calculating binary operations Tom Rini
[U-Boot] [PATCH] kconfig: add CONFIG_CC_COVERAGE Tom Rini
[U-Boot] FIT Image with same kernel but different load/entry point Tom Rini
[U-Boot] [PATCH] arm64: Add SMC and HVC commands Tom Rini
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Tom Rini
[U-Boot] [U-Boot, 1/7] treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig Tom Rini
[U-Boot] [U-Boot, 2/7] treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to Kconfig Tom Rini
[U-Boot] [U-Boot, 3/7] treewide: Migrate CONFIG_LAST_STAGE_INIT to Kconfig Tom Rini
[U-Boot] [U-Boot, 4/7] treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Tom Rini
[U-Boot] [U-Boot, 5/7] treewide: Migrate CONFIG_TSEC_ENET to Kconfig Tom Rini
[U-Boot] [U-Boot, 6/7] treewide: Migrate CONFIG_FSL_ESDHC to Kconfig Tom Rini
[U-Boot] [U-Boot, 7/7] treewide: Convert CONFIG_HOSTNAME to a string option Tom Rini
[U-Boot] [PATCH] kconfig: add CONFIG_CC_COVERAGE Tom Rini
[U-Boot] [PATCH v2] arm64: Add SMC and HVC commands Tom Rini
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 2/5] ti: am335x: Fix bootargs when building without NET Tom Rini
[U-Boot] [U-Boot, v2, 3/5] usb: gadget: USB_ETHER requires network support Tom Rini
[U-Boot] [U-Boot, v2, 4/5] ti: am335x: Fix build when networking is disabled Tom Rini
[U-Boot] [U-Boot, v2, 5/5] net: Move enetaddr env access code to env config instead of net config Tom Rini
[U-Boot] [U-Boot, v2, 1/2] Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 2/2] Cleanup CONFIG_VERSION_VARIABLE migration Tom Rini
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Tom Rini
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Tom Rini
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Tom Rini
[U-Boot] [PULL] efi patch queue 2018-04-09 Tom Rini
[U-Boot] [PATCH v2] kconfig: add CONFIG_CC_COVERAGE Tom Rini
[U-Boot] [GIT PULL] Xilinx patches for v2018.05-rc2 Tom Rini
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Tom Rini
[U-Boot] [GIT PULL] Xilinx patches for v2018.05-rc2 Tom Rini
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig Tom Rini
[U-Boot] [PATCH] configs: Fixup some CPSW-related items Tom Rini
[U-Boot] [U-Boot, v3, 3/3] dm: led: add testcase for "default-state" property Tom Rini
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section Tom Rini
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Tom Rini
[U-Boot] sysreset: syscon: convert to use live dt Tom Rini
[U-Boot] [U-Boot, u-boot] reset: Add Amlogic Meson Reset Controller Tom Rini
[U-Boot] serial: meson: Update compatible with new Linux bindings Tom Rini
[U-Boot] armv7m: disable icache before linux booting Tom Rini
[U-Boot] mkimage: do not fail if there is no print_header function Tom Rini
[U-Boot] log: Correct missing free() on error in log_add_filter() Tom Rini
[U-Boot] log: Add units to code-size stats in README.log Tom Rini
[U-Boot] [U-Boot, v2, u-boot, 1/2] reset: Add get/assert/deassert/release for bulk of reset signals Tom Rini
[U-Boot] [U-Boot, v2, u-boot, 2/2] reset: add sandbox test for bulk API Tom Rini
[U-Boot] [U-Boot, v2, u-boot, 1/2] clk: Add get/enable/disable/release for a bulk of clocks Tom Rini
[U-Boot] [U-Boot, v2, u-boot, 2/2] clk: add sandbox test for bulk API Tom Rini
[U-Boot] [U-Boot, 1/1] MAINTAINERS: ARM STM STM32MP: correct file paths Tom Rini
[U-Boot] [U-Boot, 1/1] get_maintainer.pl: update from Linux kernel v4.16 Tom Rini
[U-Boot] [U-Boot, 1/1] fw_printenv: Fix crash due to incorrect size for malloc'ed string. Tom Rini
[U-Boot] [U-Boot, 1/1] checkpatch.pl: update from Linux kernel v4.16 Tom Rini
[U-Boot] Pull request: u-boot-ubi/master Tom Rini
[U-Boot] [PATCH] arm: mach-omap2: Enlarge SYS_MALLOC_F_LEN Tom Rini
[U-Boot] spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig Tom Rini
[U-Boot] tpl: spi: Add CONFIG_TPL_SPI_LOAD to Kconfig Tom Rini
[U-Boot] tpl: ymodem: Add CONFIG_TPL_YMODEM_SUPPORT to Kconfig Tom Rini
[U-Boot] serial: Fix Makefile during SPL and TPL build Tom Rini
[U-Boot] ARM: Fix Makefile during SPL and TPL build Tom Rini
[U-Boot] spl: ram: Convert to CONFIG_IS_ENABLED Tom Rini
[U-Boot] spl: ram: Add TPL Kconfig symbols Tom Rini
[U-Boot] [PATCH] fit: skip signature verification if board request Tom Rini
[U-Boot] [PATCH] configs: am335x_boneblack: add example debug uart configuration Tom Rini
[U-Boot] Re-introducing support for OLD hardware Tom Rini
[U-Boot] [PATCH] arm: mach-omap2: Enlarge SYS_MALLOC_F_LEN Tom Rini
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section Tom Rini
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Tom Rini
[U-Boot] [PATCH] bootm: Align cache flush begin address Tom Rini
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] [U-Boot,v1,1/2] dwc_ahci: Fix breakage Tom Rini
[U-Boot] [U-Boot, v1, 2/2] configs: dra7xx_evm/dra7xx_hs_evm: Enable AHCI and PIPE3 Tom Rini
[U-Boot] [U-Boot,v2] kconfig: add CONFIG_CC_COVERAGE Tom Rini
[U-Boot] [U-Boot, v2] vxworks: fixed cpu enable using PSCI on armv8 Tom Rini
[U-Boot] configs: Fixup some CPSW-related items Tom Rini
[U-Boot] [U-Boot, 1/1] vexpress: fix syntax error in armv7_boot_nonsec_default() Tom Rini
[U-Boot] Make cmd_get_data_size() a dependency of setexpr Tom Rini
[U-Boot] [U-Boot, v2, u-boot, 1/2] reset: Add get/assert/deassert/release for bulk of reset signals Tom Rini
[U-Boot] [RFC] rules for SPDX-License-Identifier Tom Rini
[U-Boot] net: sh_eth: Add remaining Gen2 DT compatible Tom Rini
[U-Boot] [PATCHv2] Convert CONFIG_SPI to Kconfig Tom Rini
[U-Boot] [PULL] Please pull u-boot-imx Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] Please pull u-boot-cfi-flash/master Tom Rini
[U-Boot] Please pull u-boot-x86 (take 2) Tom Rini
[U-Boot] part: Disable CONFIG_SPL_ISO_PARTITION by default Tom Rini
[U-Boot] [U-Boot, v2] Kconfig: Enlarge default SYS_MALLOC_F_LEN for AM33XX Tom Rini
[U-Boot] [U-Boot, v2] env: Relocate env drivers if manual reloc is required Tom Rini
[U-Boot] [U-Boot, 1/1] env: mmc/fat/ext4: undefined reference to `mmc_initialize' Tom Rini
[U-Boot] doc: Update git-mailrc entry for lukma (lukma at denx.de) Tom Rini
[U-Boot] serial: Remove duplicated line in Makefile Tom Rini
[U-Boot] [ANN] U-Boot v2018.05-rc2 released Tom Rini
[U-Boot] [PATCH] ARC: remove unused DECLARE_GLOBAL_DATA_PTR from init_helpers.c Tom Rini
[U-Boot] [U-Boot, v2] Kconfig: Enlarge default SYS_MALLOC_F_LEN for AM33XX Tom Rini
[U-Boot] [PATCH] xilinx: Sync defconfigs based on latest NET Kconfig changes Tom Rini
[U-Boot] Please pull u-boot-marvell/master Tom Rini
[U-Boot] [PATCH 3/6] tegra: psci: save context id in cpu_on command Tom Rini
[U-Boot] [PATCH] Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR Tom Rini
[U-Boot] Please pull ARC fixes for RC3 Tom Rini
[U-Boot] [PULL] u-boot-socfpga/master Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] [GIT PULL] u-boot-uniphier/master Tom Rini
[U-Boot] [RFC PATCH v1 0/1] Migrate IMAGE_FORMAT_LEGACY to Kconfig Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] [RFC PATCH v1 0/1] Migrate IMAGE_FORMAT_LEGACY to Kconfig Tom Rini
[U-Boot] [PATCH] video-uclass: Fix logical-not-parentheses warning Tom Rini
[U-Boot] [PATCH] Makefile: Update clang warning disables from Linux Tom Rini
[U-Boot] [PATCH v2] Migrate IMAGE_FORMAT_LEGACY to Kconfig Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] [PATCH] clang: Update documentation Tom Rini
[U-Boot] [PATCH] HACK: Some further clang support for ARM Tom Rini
[U-Boot] [PATCH] configs: Drop CONFIG_NET_MULTI Tom Rini
[U-Boot] [U-Boot, 1/1] mmc: avoid division by zero in meson_mmc_config_clock Tom Rini
[U-Boot] [GIT PULL] Xilinx fixes for v2018.05-rc3 Tom Rini
[U-Boot] NDS32 toolchain? Tom Rini
[U-Boot] [GIT PULL] u-boot-uniphier/master Tom Rini
[U-Boot] mmc: Staticize sd_select_bus_width Tom Rini
[U-Boot] [PULL for 2018.05] efi patch queue 2018-04-23 for 2018.05 Tom Rini
[U-Boot] [GIT PULL] u-boot-uniphier/master Tom Rini
[U-Boot] NDS32 toolchain? Tom Rini
[U-Boot] [RFC PATCH 0/5] arm: Introduce v7R support Tom Rini
[U-Boot] [RFC PATCH 2/5] arm: v7R: Add initial support Tom Rini
[U-Boot] [RFC PATCH 3/5] arm: Kconfig: Add entry for MMU Tom Rini
[U-Boot] [RFC PATCH 4/5] arm: v7R: Add support for MPU Tom Rini
[U-Boot] [RFC PATCH 5/5] arm: v7R: Add support for enabling caches Tom Rini
[U-Boot] [RFC PATCH 4/5] arm: v7R: Add support for MPU Tom Rini
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Tom Rini
[U-Boot] Please pull u-boot-video/master Tom Rini
[U-Boot] NDS32 toolchain? Tom Rini
[U-Boot] [PATCH 3/7] arm: v7: Kconfig: Add entry for MMU Tom Rini
[U-Boot] [PATCH 4/7] arm: v7: Kconfig: Introduce SYS_ARM_CACHE_CP15 Tom Rini
[U-Boot] [PATCH 5/7] arm: v7R: Add initial support Tom Rini
[U-Boot] [PATCH 6/7] arm: v7R: Add support for MPU Tom Rini
[U-Boot] [PATCH 2/7] arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A Tom Rini
[U-Boot] [PATCH 7/7] arm: v7R: Add support for enabling caches Tom Rini
[U-Boot] [PATCH 1/2] configs: TI: Enable FIT Library overlay support Tom Rini
[U-Boot] [PATCH 2/2] env: ti: android: boot with FIT Image Tom Rini
[U-Boot] [PATCH 1/3] arm: dra76: fastboot: extend cpu type for getvar command Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05 Tom Rini
[U-Boot] [PULL] Please pull u-boot-rockchip Tom Rini
[U-Boot] [PATCH v2 6/7] arm: v7R: Add support for MPU Tom Rini
[U-Boot] [PATCH v2 7/7] arm: v7R: Add support for enabling caches Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] [PULL] u-boot-socfpga/master Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] [U-Boot,PATCHv2] Convert CONFIG_SPI to Kconfig Tom Rini
[U-Boot] Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR Tom Rini
[U-Boot] Makefile: Update clang warning disables from Linux Tom Rini
[U-Boot] clang: Update documentation Tom Rini
[U-Boot] configs: Drop CONFIG_NET_MULTI Tom Rini
[U-Boot] [U-Boot, 1/2] ARM: s32v234evb: Set CONFIG_DM & CONFIG_DM_SERIAL in Kconfig Tom Rini
[U-Boot] [U-Boot, 2/2] serial: Migrate CONFIG_FSL_LINFLEXUART to Kconfig Tom Rini
[U-Boot] kbuild: use -fmacro-prefix-map to make __FILE__ a relative path Tom Rini
[U-Boot] [U-Boot,1/1] log: CONFIG_LOG should select CONFIG_DM Tom Rini
[U-Boot] [U-Boot,1/1] cmd: CONFIG_CMD_LOG select CONFIG_LOG Tom Rini
[U-Boot] [U-Boot,v2] Migrate IMAGE_FORMAT_LEGACY to Kconfig Tom Rini
[U-Boot] lib/rsa: Kconfig: Remove superfluous 'depends on RSA' Tom Rini
[U-Boot] [U-Boot,1/1] powerpc: fix typo in kgdb.c Tom Rini
[U-Boot] [U-Boot, v2] distro: use imply to enable DISTRO_DEFAULTS as SoC default Tom Rini
[U-Boot] distro: select CMD_ENV_EXISTS Tom Rini
[U-Boot] image: Display FIT signature for configs Tom Rini
[U-Boot] [U-Boot, 1/2] ARM: qemu-arm: Dynamically determine timer frequency Tom Rini
[U-Boot] [U-Boot,2/2] arm: move SYS_ARCH_TIMER to KConfig Tom Rini
[U-Boot] [U-Boot, v2, 1/8] Cleanup CONFIG_SPL_SERIAL_SUPPORT migration Tom Rini
[U-Boot] [U-Boot, v2, 2/8] spl: ti: Avoid preloader_console_init if !CONFIG_SPL_SERIAL_SUPPORT Tom Rini
[U-Boot] [U-Boot, v2, 3/8] spl: Add dependency on serial to Ymodem Tom Rini
[U-Boot] [U-Boot, v2, 4/8] spl: ti: Avoid serial calls when serial support is disabled Tom Rini
[U-Boot] [U-Boot, v2, 5/8] spl: Split sprintf, strto* from SPL serial in Kconfig Tom Rini
[U-Boot] [U-Boot,v2,6/8] spl: Disable printf if not required Tom Rini
[U-Boot] [U-Boot, v2, 7/8] Consolidate __assert_failed into one implementation Tom Rini
[U-Boot] [U-Boot, v2, 8/8] spl: disk: usb: Add dependencies to sprintf/strto* Tom Rini
[U-Boot] [U-Boot,v1,1/2] serial: serial_stm32: Enable overrun Tom Rini
[U-Boot] [U-Boot, v1, 2/2] serial: serial_stm32: Rename status register flags Tom Rini
[U-Boot] [U-Boot, 1/2] tools: mkenvimage: Fix read() stdin error handling Tom Rini
[U-Boot] [U-Boot, 2/2] tools: mkenvimage: Fix possible segfault on stdin input Tom Rini
[U-Boot] tools: mkimage: Check for datafile when type is script Tom Rini
[U-Boot] test: dm: regmap: fix license header Tom Rini
[U-Boot] Pull request: u-boot-sunxi/master Tom Rini
[U-Boot] [PATCH v3 1/7] bootcount: spl: Enable bootcount support in SPL Tom Rini
[U-Boot] [PATCH v3 2/7] bootcount: Add include guards into bootcount.h file Tom Rini
[U-Boot] [PATCH v3 4/7] bootcount: Rewrite autoboot to use wrapper functions from bootcount.h Tom Rini
[U-Boot] [PATCH v3 5/7] bootcount: spl: Extend SPL to support bootcount incrementation Tom Rini
[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP Tom Rini
[U-Boot] [RFH] Das U-Boot logo help Tom Rini
[U-Boot] [PULL] Please pull u-boot-imx Tom Rini
[U-Boot] Pull request: u-boot-sunxi/master Tom Rini
[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP Tom Rini
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Maxime Ripard
[U-Boot] [PATCH v3 00/20] Bring NAND support to Nintendo NES Classic Maxime Ripard
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Maxime Ripard
[U-Boot] [PATCH v5 09/11] sunxi: disable direct MMC environment Maxime Ripard
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Maxime Ripard
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Maxime Ripard
[U-Boot] [PATCH] sunxi: improve SATAPWR and MACPWR Maxime Ripard
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Maxime Ripard
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Maxime Ripard
[U-Boot] [PATCH 1/1] sunxi: R40: add support for gigabit ethernet Maxime Ripard
[U-Boot] [PATCH v1 8/8] spl: disk: usb: Add dependencies to sprintf/strto* Maxime Ripard
[U-Boot] [PATCH v2 1/5] sunxi: R40: add gigabit ethernet clocks Maxime Ripard
[U-Boot] [PATCH v2 2/5] sunxi: R40: add gigabit ethernet reset Maxime Ripard
[U-Boot] [PATCH v2 3/5] sunxi: R40: add gigabit ethernet gpio pinmux Maxime Ripard
[U-Boot] [PATCH v2 4/5] sunxi: R40: add gigabit ethernet devicetree node Maxime Ripard
[U-Boot] [PATCH v2 5/5] configs: Bananapi_M2_Ultra: enable gigabit on the Bananapi M2U Maxime Ripard
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Maxime Ripard
[U-Boot] [PATCH v5 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata Maxime Ripard
[U-Boot] [PATCH v5 06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Maxime Ripard
[U-Boot] [PATCH v5 07/34] sunxi: clock: Fix OHCI clock gating for H3/H5 Maxime Ripard
[U-Boot] [PATCH] sunxi: Add support for Libre Computer Board ALL-H3-CC H5 ver. Maxime Ripard
[U-Boot] [PATCH 1/5] sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver. Maxime Ripard
[U-Boot] [PATCH 5/5] sunxi: Sort dts Makefile entries for H3 Maxime Ripard
[U-Boot] [PATCH 4/5] sunxi: Add Libre Computer Board ALL-H3-CC H5 ver. Maxime Ripard
[U-Boot] [PATCH v3 4/5] sunxi: R40: add gigabit ethernet devicetree node Maxime Ripard
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Maxime Ripard
[U-Boot] [PATCH 2/3] sunxi: sun8i: Add Allwinner V40 support Maxime Ripard
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Peter Robinson
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Peter Robinson
[U-Boot] FIT Image with same kernel but different load/entry point Peter Robinson
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Peter Robinson
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Peter Robinson
[U-Boot] [PATCH] db410c: set clk node to be probed before relocation Peter Robinson
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Peter Robinson
[U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues Peter Robinson
[U-Boot] [PATCH 0/2] Add fix for Pine64 gigabit throughput issues Peter Robinson
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Peter Robinson
[U-Boot] [PATCH] sunxi: A64/H5 devices: enable usb keyboard support Peter Robinson
[U-Boot] Issues with Rockchips make_fit_atf.py on master Peter Robinson
[U-Boot] [PATCH 1/2] arm: rockchip: make_fit_atf: remove unneeded imports Peter Robinson
[U-Boot] [PATCH 2/2] config: evb-rk3399: enable make uboot.itb Peter Robinson
[U-Boot] Marvell Armada-38x DDR training code Stefan Roese
[U-Boot] [PATCH] net: mvneta: support setting hardware address Stefan Roese
[U-Boot] [PATCH] mmc: mv_sdhci: zero out sdhci_host structure Stefan Roese
[U-Boot] [PATCH] mmc: mv_sdhci: zero out sdhci_host structure Stefan Roese
[U-Boot] [PATCH] mtd: cfi_flash: Make live-tree compatible Stefan Roese
[U-Boot] Please pull u-boot-cfi-flash/master Stefan Roese
[U-Boot] [PATCH v2] mmc: mv_sdhci: zero out sdhci_host structure Stefan Roese
[U-Boot] [PATCH v2] mmc: mv_sdhci: zero out sdhci_host structure Stefan Roese
[U-Boot] Please pull u-boot-marvell/master Stefan Roese
[U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion Stefan Roese
[U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion Stefan Roese
[U-Boot] [PATCH v3 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking Stefan Roese
[U-Boot] [PATCH v3 4/7] bootcount: Rewrite autoboot to use wrapper functions from bootcount.h Stefan Roese
[U-Boot] [PATCH v3 5/7] bootcount: spl: Extend SPL to support bootcount incrementation Stefan Roese
[U-Boot] u-boot.dtb is not generated when enabling verified boot Davis Roman
[U-Boot] u-boot.dtb is not generated when enabling verified boot Davis Roman
[U-Boot] How to modify devicetree blob inside fit image via the u-boot shell using the fdt command Davis Roman
[U-Boot] u-boot.dtb is not generated when enabling verified boot Davis Roman
[U-Boot] u-boot.dtb is not generated when enabling verified boot Davis Roman
[U-Boot] u-boot.dtb is not generated when enabling verified boot Davis Roman
[U-Boot] u-boot.dtb is not generated when enabling verified boot Davis Roman
[U-Boot] How to modify devicetree blob inside fit image via the u-boot shell using the fdt command Davis Roman
[U-Boot] [PATCH] lib/rsa: Kconfig: Remove superfluous 'depends on RSA' Eugeniu Rosca
[U-Boot] [PATCH 1/5] ARM: mxs: make lowlevel_init() weak Mans Rullgard
[U-Boot] [PATCH 2/5] ARM: arm926ejs: fix lowlevel_init call Mans Rullgard
[U-Boot] [PATCH 3/5] ARM: spl: include arm/thumb glue sections Mans Rullgard
[U-Boot] [PATCH 4/5] ARM: mxs: move spl data Mans Rullgard
[U-Boot] [PATCH 5/5] ARM: mxs: support full SPL framework Mans Rullgard
[U-Boot] [PATCH] ARM: mxs: let boards override entire dram parameter table Mans Rullgard
[U-Boot] [PATCH v2 1/2] arm: make arm926ejs startup code thumb compatible Måns Rullgård
[U-Boot] [PATCH v2 2/2] arm: Make arch specific memcpy thumb-safe. Måns Rullgård
[U-Boot] [PATCH v2 2/2] arm: Make arch specific memcpy thumb-safe. Måns Rullgård
[U-Boot] [RFH] Das U-Boot logo help Måns Rullgård
[U-Boot] [[RESEND] PATCH v3 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE Hannes Schmelzer
[U-Boot] [[RESEND] PATCH v3 2/2] mmc: zynq_sdhci: use correct quirk if CONFIG_ZYNQ_HISPD_BROKEN is defined Hannes Schmelzer
[U-Boot] RSA Signed images/configs issue John Schmoller
[U-Boot] [PATCH 5/6] i2c: designware: add reset ctrl to driver Heiko Schocher
[U-Boot] [PATCH] ubifs: Change value of mutex_is_locked() Heiko Schocher
[U-Boot] Pull request: u-boot-ubi/master Heiko Schocher
[U-Boot] [PATCH 1/3] i2c: ihs_i2c: Use new fpgamap interface Heiko Schocher
[U-Boot] [PATCH 2/3] i2c: fsl: Use dev_read_addr Heiko Schocher
[U-Boot] [PATCH 3/3] i2c: fsl: Add option to get clock from DT Heiko Schocher
[U-Boot] [PATCH v2 1/2] dm: i2c: dts: Add gpios and pinctrl device tree properties Heiko Schocher
[U-Boot] [PATCH v2 2/2] dm: i2c: implement gpio-based I2C deblock Heiko Schocher
[U-Boot] Fwd: Re: Please pull from u-boot-i2c Heiko Schocher
[U-Boot] [PATCH] arm,imx6: fix PAD_CTL_SPEED_LOW constant Heiko Schocher
[U-Boot] Fwd: drivers: spi: SPI NOR write fails since commit 6c94bd12c4ad Heiko Schocher
[U-Boot] [PATCH] arm,imx6: fix PAD_CTL_SPEED_LOW constant Heiko Schocher
[U-Boot] [PATCH 1/1] efi_loader: completely initialize network Heinrich Schuchardt
[U-Boot] [PATCH v2 0/3] efi_loader: armv7: enable unaligned access Heinrich Schuchardt
[U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access Heinrich Schuchardt
[U-Boot] [PATCH v2 2/3] arm: armv7: allow unaligned memory access Heinrich Schuchardt
[U-Boot] [PATCH v2 3/3] efi_selftest: test unaligned memory access Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: completely initialize network Heinrich Schuchardt
[U-Boot] [PATCH v2 0/6] efi_loader: fixes for loaded image protocol Heinrich Schuchardt
[U-Boot] [PATCH v2 1/6] efi_loader: use efi_uintn_t for LoadImage Heinrich Schuchardt
[U-Boot] [PATCH v2 2/6] efi_loader: save image relocation address and size Heinrich Schuchardt
[U-Boot] [PATCH v2 3/6] efi_loader: ImageSize must be multiple of SectionAlignment Heinrich Schuchardt
[U-Boot] [PATCH v2 4/6] efi_loader: correct types for EFI_LOADED_IMAGE_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH v2 5/6] efi_loader: new functions to print loaded image information Heinrich Schuchardt
[U-Boot] [PATCH v2 6/6] arm: print information about loaded UEFI images Heinrich Schuchardt
[U-Boot] [PATCH 0/2] efi_loader: EFI_FILE_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH 1/2] efi_loader: use correct types in EFI_FILE_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH 2/2] efi_loader: implement EFI_FILE_SYSTEM_INFO Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: correctly determine the boot partition Heinrich Schuchardt
[U-Boot] [PATCH 1/1] MAINTAINERS: ARM STM STM32MP: correct file paths Heinrich Schuchardt
[U-Boot] [PATCH 1/1] get_maintainer.pl: update from Linux kernel v4.16 Heinrich Schuchardt
[U-Boot] [PATCH v2 2/3] arm: armv7: allow unaligned memory access Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: completely initialize network Heinrich Schuchardt
[U-Boot] [PATCH 1/1] checkpatch.pl: update from Linux kernel v4.16 Heinrich Schuchardt
[U-Boot] [PATCH v3 0/5] efi_loader: EFI_FILE_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH v3 1/5] efi_loader: use const for GUIDs in the EFI_FILE_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH v3 2/5] efi_loader: ascii2unicode(): add trailing \0 Heinrich Schuchardt
[U-Boot] [PATCH v3 3/5] efi_loader: implement EFI_FILE_SYSTEM_INFO Heinrich Schuchardt
[U-Boot] [PATCH v3 4/5] efi_selftest: partition label for test image Heinrich Schuchardt
[U-Boot] [PATCH v3 5/5] efi_selftest: test getinfo(EFI_FILE_SYSTEM_INFO) Heinrich Schuchardt
[U-Boot] [PATCH v3 0/2] efi_loader: fixes for loaded image protocol Heinrich Schuchardt
[U-Boot] [PATCH v3 1/2] efi_loader: new functions to print loaded image information Heinrich Schuchardt
[U-Boot] [PATCH v3 2/2] arm: print information about loaded UEFI images Heinrich Schuchardt
[U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access Heinrich Schuchardt
[U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access Heinrich Schuchardt
[U-Boot] [PATCH] efi_loader: Check machine type in the image header Heinrich Schuchardt
[U-Boot] [PATCH v4 0/2] efi_loader: print information about loaded UEFI images Heinrich Schuchardt
[U-Boot] [PATCH v4 1/2] efi_loader: new functions to print loaded image information Heinrich Schuchardt
[U-Boot] [PATCH v4 2/2] arm: print information about loaded UEFI images Heinrich Schuchardt
[U-Boot] [PATCH v2] efi_loader: Check machine type in the image header Heinrich Schuchardt
[U-Boot] [RFC] efi_loader: support for CONFIG_ARMV7_NONSEC Heinrich Schuchardt
[U-Boot] [PATCH v2] efi_loader: Check machine type in the image header Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: correctly set the machine type in the PE header Heinrich Schuchardt
[U-Boot] [PATCH] efi_loader: Respect DT reserved regions Heinrich Schuchardt
[U-Boot] [PATCH 1/1] log: fix typo LOGL_EFI - Please, pick for v2018.05-rc2 Heinrich Schuchardt
[U-Boot] [PATCH 1/1] mmc: avoid division by zero in meson_mmc_config_clock - Please, consider for v2018.05-rc2 Heinrich Schuchardt
[U-Boot] [PATCH 1/1] vexpress: fix syntax error in armv7_boot_nonsec_default() Heinrich Schuchardt
[U-Boot] [PATCH 1/1][for v2018.05] efi_loader: no support for ARMV7_NONSEC=y Heinrich Schuchardt
[U-Boot] [PATCH 1/1] rockchip: rk3288: provide ${fdtfile} Heinrich Schuchardt
[U-Boot] [PATCH 1/1] rockchip: rk3288: provide ${fdtfile} Heinrich Schuchardt
[U-Boot] [RFC] rules for SPDX-License-Identifier Heinrich Schuchardt
[U-Boot] [PATCH 1/1] env: mmc/fat/ext4: undefined reference to `mmc_initialize' Heinrich Schuchardt
[U-Boot] [RFC] rules for SPDX-License-Identifier Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 0/8] efi_loader: fixes for EFI_DEVICE_PATH_UTILITIES_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 1/8] efi_selftest: do not execute test if setup failed Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 2/8] efi_selftest: fix typo in efi_selftest_devicepath.c Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 3/8] efi_loader: implement CreateDeviceNode Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 4/8] efi_loader: fix AppendDevicePath Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 5/8] efi_loader: correctly determine length of empty device path Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 6/8] efi_loader: correcty determine total device path length Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 7/8] efi_loader: complete EFI_DEVICE_PATH_UTILITIES_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH for 2018.05 8/8] efi_selftest: test EFI_DEVICE_PATH_UTILITIES_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH v2 0/8] efi_loader: fixes for EFI_DEVICE_PATH_UTILITIES_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH v2 1/8] efi_selftest: do not execute test if setup failed Heinrich Schuchardt
[U-Boot] [PATCH v2 2/8] efi_selftest: fix typo in efi_selftest_devicepath.c Heinrich Schuchardt
[U-Boot] [PATCH v2 3/8] efi_loader: implement CreateDeviceNode Heinrich Schuchardt
[U-Boot] [PATCH v2 4/8] efi_loader: fix AppendDevicePath Heinrich Schuchardt
[U-Boot] [PATCH v2 5/8] efi_loader: correctly determine length of empty device path Heinrich Schuchardt
[U-Boot] [PATCH v2 6/8] efi_loader: correcty determine total device path length Heinrich Schuchardt
[U-Boot] [PATCH v2 7/8] efi_loader: complete EFI_DEVICE_PATH_UTILITIES_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH v2 8/8] efi_selftest: test EFI_DEVICE_PATH_UTILITIES_PROTOCOL Heinrich Schuchardt
[U-Boot] [PATCH 6/8] distro: Extend with RISC-V defines Heinrich Schuchardt
[U-Boot] [PATCH 3/8] efi_loader: selftest: Do not build relocation tests for risc-v Heinrich Schuchardt
[U-Boot] [PATCH 8/8] efi_loader: Enable RISC-V support Heinrich Schuchardt
[U-Boot] [PATCH 3/8] efi_loader: selftest: Do not build relocation tests for risc-v Heinrich Schuchardt
[U-Boot] [PATCH v2 6/8] distro: Extend with RISC-V defines Heinrich Schuchardt
[U-Boot] [PATCH v2 6/8] distro: Extend with RISC-V defines Heinrich Schuchardt
[U-Boot] [PATCH 1/1] log: CONFIG_LOG should select CONFIG_DM Heinrich Schuchardt
[U-Boot] [PATCH 1/1] cmd: CONFIG_CMD_LOG select CONFIG_LOG Heinrich Schuchardt
[U-Boot] [PATCH v3 6/8] distro: Extend with RISC-V defines Heinrich Schuchardt
[U-Boot] [PATCH v3 5/8] efi_loader: Use EFI_CACHELINE_SIZE in the image loader too Heinrich Schuchardt
[U-Boot] [PATCH v3 2/8] riscv: Enable function sections Heinrich Schuchardt
[U-Boot] [PATCH 1/1] powerpc: fix typo in kgdb.c Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: remove unnecessary include Heinrich Schuchardt
[U-Boot] [PATCH 1/1] arm: armv7: enable unaligned access Heinrich Schuchardt
[U-Boot] [PATCH 0/2] efi_loader: updating the cursor position Heinrich Schuchardt
[U-Boot] [PATCH 1/2] efi_loader: updating the cursor position Heinrich Schuchardt
[U-Boot] [PATCH 2/2] efi_selftest: updating the cursor position Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: always check parameters in efi_cout_query_mode() Heinrich Schuchardt
[U-Boot] [PATCH 1/1] video: if EFI_LOADER is enabled, enable CFB_CONSOLE_ANSI Heinrich Schuchardt
[U-Boot] [PATCH 1/1] video: if EFI_LOADER is enabled, enable CFB_CONSOLE_ANSI Heinrich Schuchardt
[U-Boot] [PATCH v2 1/1] efi_loader: if EFI_LOADER is enabled, enable CFB_CONSOLE_ANSI Heinrich Schuchardt
[U-Boot] [PATCH 1/1] include: update log2 header from the Linux kernel Heinrich Schuchardt
[U-Boot] Fwd: [PATCH 1/1] include: update log2 header from the Linux kernel Heinrich Schuchardt
[U-Boot] Logo for U-Boot Heinrich Schuchardt
[U-Boot] [PATCH] fit: skip signature verification if board request Quentin Schulz
[U-Boot] [PATCH v2 01/17] dm: core: add functions to get memory-mapped I/O addreses Daniel Schwierzeck
[U-Boot] [PATCH v3] dm: core: add functions to get memory-mapped I/O addresses Daniel Schwierzeck
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 See, Chin Liang
[U-Boot] [PATCH 2/5] image: socfpga: Add SFP image version 1 definition See, Chin Liang
[U-Boot] [PATCH 3/5] tools: socfpga: Stop using global struct socfpga_image See, Chin Liang
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 See, Chin Liang
[U-Boot] [PATCH 5/5] spl: socfpga: Generate Arria10 SFP header V1 See, Chin Liang
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 See, Chin Liang
[U-Boot] [PATCH v1 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch See, Chin Liang
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC See, Chin Liang
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 See, Chin Liang
[U-Boot] send message on serial ports Ran Shalit
[U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support Andy Shevchenko
[U-Boot] [PATCH] x86: Use microcode update from device tree for all processors Andy Shevchenko
[U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support Andy Shevchenko
[U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support Andy Shevchenko
[U-Boot] [PATCH v4] timer: Add High Precision Event Timers (HPET) support Andy Shevchenko
[U-Boot] [PATCH v5 2/2] timer: Add High Precision Event Timers (HPET) support Andy Shevchenko
[U-Boot] [PATCH v5 1/2] x86: Add 64-bit memory-mapped I/O functions Andy Shevchenko
[U-Boot] [PATCH v6] x86: Add 64-bit memory-mapped I/O functions Andy Shevchenko
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Andy Shevchenko
[U-Boot] [PATCH v6 1/2] x86: Add TSC-specific timer functions Andy Shevchenko
[U-Boot] [linux-sunxi] Re: [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Siarhei Siamashka
[U-Boot] [PATCH 2/2] image: fit: Show information about OS type in firwmare case too Michal Simek
[U-Boot] [PATCH 1/6] arm64: zynqmp: Add support for zcu100 aka 96ultra board Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Remove power domain description Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Get 200MHz clock early for MMC Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Remove pinctrl settings Michal Simek
[U-Boot] [PATCH v2 0/6] arm64: zynqmp: Add new platforms to u-boot Michal Simek
[U-Boot] [PATCH v2 1/6] arm64: zynqmp: Add support for zcu100 aka 96ultra board Michal Simek
[U-Boot] [PATCH v2 2/6] arm64: zynqmp: Add support for zc1751 dc3 Michal Simek
[U-Boot] [PATCH v2 3/6] arm64: zynqmp: Add support for zc12xx boards Michal Simek
[U-Boot] [PATCH v2 4/6] arm64: zynqmp: Add support for zcu104 customer board Michal Simek
[U-Boot] [PATCH v2 5/6] arm64: zynqmp: Add support for Xilinx zcu106-revA Michal Simek
[U-Boot] [PATCH v2 6/6] arm64: zynqmp: Add support for Xilinx zcu111-revA Michal Simek
[U-Boot] [RFC PATCH 1/2] fpga: xilinx: zynq: Add support to decrypt images Michal Simek
[U-Boot] [RFC PATCH 2/2] zynq: Add support for loading secure images Michal Simek
[U-Boot] [PATCH v1 0/2] Fix DM_SCSI on DRA7 platforms Michal Simek
[U-Boot] [RFC PATCH] scsi: ceva: Convert driver to use UCLASS_AHCI instead of SCSI Michal Simek
[U-Boot] [PATCH v1 0/2] Fix DM_SCSI on DRA7 platforms Michal Simek
[U-Boot] [GIT PULL] Xilinx patches for v2018.05-rc2 Michal Simek
[U-Boot] [GIT PULL] Xilinx patches for v2018.05-rc2 Michal Simek
[U-Boot] [GIT PULL] Xilinx patches for v2018.05-rc2 Michal Simek
[U-Boot] [PATCH] arm: zynq: Enable setup board name for different boards Michal Simek
[U-Boot] [PATCH] arm: zynq: Wire automatic ddr detection for Zynq and ZynqMP case Michal Simek
[U-Boot] [PATCH] arm: zynq: Make ENV_SIZE and ENV_OFFSET optional via board file Michal Simek
[U-Boot] [PATCH] net: zynq_gem: Use max-speed property from dt Michal Simek
[U-Boot] [PATCH] env: Relocate env drivers if manual reloc is required Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Add new defconfig for zc1275 revB Michal Simek
[U-Boot] [PATCH] microblaze: Dont enable UBI support by default Michal Simek
[U-Boot] [PATCH] arm: zynq: Disable NFS and MII on zc770 xm011 Michal Simek
[U-Boot] [PATCH] arm: zynq: Sync zc770 xm011 defconfigs Michal Simek
[U-Boot] [PATCH v2] env: Relocate env drivers if manual reloc is required Michal Simek
[U-Boot] [PATCH] env: Relocate env drivers if manual reloc is required Michal Simek
[U-Boot] [PATCH v3 3/3] tools: zynqmpimage: Add bif support Michal Simek
[U-Boot] [PATCH v3 1/3] tools: zynqmpimage: Add partition read support Michal Simek
[U-Boot] [PATCH] arm: zynq: Disable NFS and MII on zc770 xm011 Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Sync CONFIG_SPL_ISO_PARTITION selection Michal Simek
[U-Boot] [PATCH] xilinx: Sync defconfigs based on latest NET Kconfig changes Michal Simek
[U-Boot] [PATCH] timer: Add Cadence TTC timer counter support Michal Simek
[U-Boot] [PATCH] xilinx: Sync defconfigs based on latest NET Kconfig changes Michal Simek
[U-Boot] [PATCH] serial: Remove header depedency on arm header structure Michal Simek
[U-Boot] [RFC PATCH] arm: zynqmp: Add ZynqMP minimal R5 support Michal Simek
[U-Boot] [PATCH] arm: zynq: Enable debug_uart_init in spl when enabled Michal Simek
[U-Boot] [PATCH 1/2] arm: zynq: Rework FPGA initialization Michal Simek
[U-Boot] [PATCH 2/2] arm: zynq: Remove checkboard and enable DISPLAY_CPUINFO Michal Simek
[U-Boot] [PATCH 1/2] nand: zynq: Fix driver initialization Michal Simek
[U-Boot] [PATCH 2/2] nand: zynq: Cleanup initialization Michal Simek
[U-Boot] [PATCH 1/2] nand: zynq: Add support for 16-bit buswidth Michal Simek
[U-Boot] [PATCH 2/2] nand: zynq: Send address cycles as per onfi parameter page Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Reset FPD Watchdog on zcu100 Michal Simek
[U-Boot] [PATCH] watchdog: cadence: Remove useless ioremap Michal Simek
[U-Boot] [PATCH] cmd: clk: Check return value from soc_clk_dump Michal Simek
[U-Boot] [PATCH] watchdog: cadence: Show used timeout value Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Wire watchdog internals Michal Simek
[U-Boot] [RFC PATCH] arm: zynqmp: Add ZynqMP minimal R5 support Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Setup MMU map for DDR at run time Michal Simek
[U-Boot] [PATCH 1/2] nand: zynq: Fix driver initialization Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Enable cadence WDT for zcu100 Michal Simek
[U-Boot] [PATCH 1/2] arm: Add minimal support for Cortex-R5 Michal Simek
[U-Boot] [PATCH 2/2] arm: zynqmp: Add ZynqMP minimal R5 support Michal Simek
[U-Boot] [RFC PATCH] arm: zynqmp: Add ZynqMP minimal R5 support Michal Simek
[U-Boot] [PATCH 1/2] arm: Add minimal support for Cortex-R5 Michal Simek
[U-Boot] [GIT PULL] Xilinx fixes for v2018.05-rc3 Michal Simek
[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP Michal Simek
[U-Boot] [UBOOT PATCH v3 7/7] zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board Michal Simek
[U-Boot] [UBOOT PATCH v3 6/7] mmc: zynq_sdhci: Add support for SD3.0 Michal Simek
[U-Boot] [PATCH 1/2] arm: Add minimal support for Cortex-R5 Michal Simek
[U-Boot] [PATCH 1/2] arm: Add minimal support for Cortex-R5 Michal Simek
[U-Boot] [RFC PATCH 0/5] arm: Introduce v7R support Michal Simek
[U-Boot] [RFC PATCH 0/5] arm: Introduce v7R support Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Show model information instead of custom IDENT_STRING Michal Simek
[U-Boot] [PATCH v2] zynqmp: Add generic target Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Simplify boot_target variable composition Michal Simek
[U-Boot] [RFC PATCH 1/2] arm64: zynqmp: Setup the first boot_target at run time Michal Simek
[U-Boot] [RFC PATCH 2/2] arm64: zynqmp: Try to create bootcm_mmcX at run time Michal Simek
[U-Boot] [PATCH 0/7] arm: Introduce v7R support Michal Simek
[U-Boot] [RFC PATCH 1/2] arm64: zynqmp: Setup the first boot_target at run time Michal Simek
[U-Boot] [RFC PATCH 2/2] arm64: zynqmp: Try to create bootcm_mmcX at run time Michal Simek
[U-Boot] [RFC PATCH 1/2] arm64: zynqmp: Setup the first boot_target at run time Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Setup MMU map for DDR at run time Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Setup MMU map for DDR at run time Michal Simek
[U-Boot] [PATCH] tools: zynqmpbif: Add support for load=after Michal Simek
[U-Boot] [PATCH] tools: zynqmpbif: Add support for load=after Michal Simek
[U-Boot] [PATCH v2 1/2] misc: uclass: Add enable/disable function Michal Simek
[U-Boot] [PATCH v2] arm64: zynqmp: Setup MMU map for DDR at run time Michal Simek
[U-Boot] [PATCH v2] arm: zynqmp: Add ZynqMP minimal R5 support Michal Simek
[U-Boot] [PATCH v4 3/4] MAINTAINERS: Declare tools/zynq*.{c, h} as Xilinx maintained Michal Simek
[U-Boot] [PATCH v4 0/4] tools: zynqmpimage: Support partitions Michal Simek
[U-Boot] [PATCH v2] arm: zynqmp: Add ZynqMP minimal R5 support Michal Simek
[U-Boot] [PATCH v2] arm64: zynqmp: Setup MMU map for DDR at run time Michal Simek
[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP Michal Simek
[U-Boot] [PATCH v2] arm: zynqmp: Add ZynqMP minimal R5 support Michal Simek
[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP Michal Simek
[U-Boot] [PATCH] configs: am335x_boneblack: add example debug uart configuration Sjoerd Simons
[U-Boot] [PATCH] arm: mach-omap2: Enlarge SYS_MALLOC_F_LEN Sjoerd Simons
[U-Boot] [PATCH] arm: mach-omap2: Enlarge SYS_MALLOC_F_LEN Sjoerd Simons
[U-Boot] [PATCH v2] Kconfig: Enlarge default SYS_MALLOC_F_LEN for AM33XX Sjoerd Simons
[U-Boot] [PATCH 00/19] spi: mpc8xxx: DM conversion Mario Six
[U-Boot] [PATCH 01/19] spi: mpc8xxx: Use short type names Mario Six
[U-Boot] [PATCH 02/19] spi: mpc8xxx: Fix comments Mario Six
[U-Boot] [PATCH 03/19] spi: mpc8xxx: Rename camel-case variables Mario Six
[U-Boot] [PATCH 04/19] spi: mpc8xxx: Fix space after cast Mario Six
[U-Boot] [PATCH 05/19] spi: mpc8xxx: Fix function names in strings Mario Six
[U-Boot] [PATCH 06/19] spi: mpc8xxx: Replace defines with enums Mario Six
[U-Boot] [PATCH 07/19] spi: mpc8xxx: Use IO accessors Mario Six
[U-Boot] [PATCH 08/19] spi: mpc8xxx: Simplify if Mario Six
[U-Boot] [PATCH 09/19] spi: mpc8xxx: Get rid of is_read Mario Six
[U-Boot] [PATCH 10/19] spi: mpc8xxx: Simplify logic a bit Mario Six
[U-Boot] [PATCH 11/19] spi: mpc8xxx: Reduce scope of loop variables Mario Six
[U-Boot] [PATCH 12/19] spi: mpc8xxx: Make code more readable Mario Six
[U-Boot] [PATCH 13/19] spi: mpc8xxx: Rename variable Mario Six
[U-Boot] [PATCH 14/19] spi: mpc8xxx: Document LEN setting better Mario Six
[U-Boot] [PATCH 15/19] spi: mpc8xxx: Re-order transfer setup Mario Six
[U-Boot] [PATCH 16/19] spi: mpc8xxx: Fix if check Mario Six
[U-Boot] [PATCH 17/19] spi: mpc8xxx: Use get_timer Mario Six
[U-Boot] [PATCH 18/19] spi: mpc8xxx: Prepare DM conversion Mario Six
[U-Boot] [PATCH 19/19] spi: mpc8xxx: Add DM support Mario Six
[U-Boot] [PATCH 3/3] cmd: Add osd commands Mario Six
[U-Boot] [PATCH 2/3] core: Add functions to set properties in live-tree Mario Six
[U-Boot] [PATCH 1/3] core: Add function to get device for ofnode Mario Six
[U-Boot] [PATCH 1/3] drivers: Add OSD uclass Mario Six
[U-Boot] [PATCH 3/3] core: Add dev_{disable,enable}_by_path Mario Six
[U-Boot] [PATCH 2/3] video_osd: Add ihs_video_out driver Mario Six
[U-Boot] [PATCH 1/2] drivers: Add devinfo uclass Mario Six
[U-Boot] [PATCH 1/3] drivers: Add FPGA register map uclass Mario Six
[U-Boot] [PATCH 6/7] video_display: Add power_on function Mario Six
[U-Boot] [PATCH 2/2] devinfo: Add gazerbeam info driver Mario Six
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Mario Six
[U-Boot] [PATCH 1/7] drivers: Add AXI uclass and ihs_axi driver Mario Six
[U-Boot] [PATCH 1/2] misc: uclass: Add enable/disable functions Mario Six
[U-Boot] [PATCH 2/7] axi: Add AXI sandbox driver and simple emulator Mario Six
[U-Boot] [PATCH 1/8] core: Add uclass_{first, next}_device_compat Mario Six
[U-Boot] [PATCH 7/7] video_display: Add Xilinx LogiCore DP TX Mario Six
[U-Boot] [PATCH 1/3] core: Add function to get device for ofnode Mario Six
[U-Boot] [PATCH 6/7] video_display: Add power_on function Mario Six
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Mario Six
[U-Boot] [PATCH 7/7] video_display: Add Xilinx LogiCore DP TX Mario Six
[U-Boot] [PATCH 1/8] core: Add uclass_{first, next}_device_compat Mario Six
[U-Boot] [PATCH 2/3] core: Add functions to set properties in live-tree Mario Six
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Mario Six
[U-Boot] [PATCH 19/19] spi: mpc8xxx: Add DM support Mario Six
[U-Boot] [PATCH 19/19] spi: mpc8xxx: Add DM support Mario Six
[U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion Mario Six
[U-Boot] [PATCH v2 01/18] spi: mpc8xxx: Use short type names Mario Six
[U-Boot] [PATCH v2 02/18] spi: mpc8xxx: Fix comments Mario Six
[U-Boot] [PATCH v2 03/18] spi: mpc8xxx: Rename camel-case variables Mario Six
[U-Boot] [PATCH v2 04/18] spi: mpc8xxx: Fix space after cast Mario Six
[U-Boot] [PATCH v2 05/18] spi: mpc8xxx: Fix function names in strings Mario Six
[U-Boot] [PATCH v2 06/18] spi: mpc8xxx: Replace defines with enums Mario Six
[U-Boot] [PATCH v2 07/18] spi: mpc8xxx: Use IO accessors Mario Six
[U-Boot] [PATCH v2 08/18] spi: mpc8xxx: Simplify if Mario Six
[U-Boot] [PATCH v2 09/18] spi: mpc8xxx: Get rid of is_read Mario Six
[U-Boot] [PATCH v2 10/18] spi: mpc8xxx: Simplify logic a bit Mario Six
[U-Boot] [PATCH v2 11/18] spi: mpc8xxx: Reduce scope of loop variables Mario Six
[U-Boot] [PATCH v2 12/18] spi: mpc8xxx: Make code more readable Mario Six
[U-Boot] [PATCH v2 13/18] spi: mpc8xxx: Rename variable Mario Six
[U-Boot] [PATCH v2 14/18] spi: mpc8xxx: Document LEN setting better Mario Six
[U-Boot] [PATCH v2 15/18] spi: mpc8xxx: Re-order transfer setup Mario Six
[U-Boot] [PATCH v2 16/18] spi: mpc8xxx: Fix if check Mario Six
[U-Boot] [PATCH v2 17/18] spi: mpc8xxx: Use get_timer Mario Six
[U-Boot] [PATCH v2 18/18] spi: mpc8xxx: Convert to DM Mario Six
[U-Boot] [PATCH v2 18/18] spi: mpc8xxx: Convert to DM Mario Six
[U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion Mario Six
[U-Boot] [PATCH v2 18/18] spi: mpc8xxx: Convert to DM Mario Six
[U-Boot] [PATCH 1/3] core: Add function to get device for ofnode Mario Six
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Mario Six
[U-Boot] [PATCH] arm: controlcenterdc: Add spi-flash compatible strings Mario Six
[U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion Mario Six
[U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function Mario Six
[U-Boot] [PATCH v2 1/3] drivers: Add board uclass Mario Six
[U-Boot] [PATCH v2 2/3] devinfo: Add gazerbeam board driver Mario Six
[U-Boot] [PATCH v2 3/3] test: Add tests for board uclass Mario Six
[U-Boot] [PATCH v2 1/4] core: Add functions to set properties in live-tree Mario Six
[U-Boot] [PATCH v2 2/4] test: Add tests for DT-manipulation functions Mario Six
[U-Boot] [PATCH v2 3/4] core: Add dev_{disable,enable}_by_path Mario Six
[U-Boot] [PATCH v2 4/4] test: Add tests for dev_{enable, disable}_by_path Mario Six
[U-Boot] [PATCH v2 1/5] regmap: Add size parameter Mario Six
[U-Boot] [PATCH v2 2/5] regmap: Support reading from specific range Mario Six
[U-Boot] [PATCH v2 3/5] regmap: Define regmap_{get,set} Mario Six
[U-Boot] [PATCH v2 4/5] misc: Add gdsys_soc driver Mario Six
[U-Boot] [PATCH v2 5/5] misc: Add IHS FPGA driver Mario Six
[U-Boot] [PATCH v2 1/2] ihs_mdio: Encapsulate register access Mario Six
[U-Boot] [PATCH v2 2/2] ihs_mdio: Make DM-compatible Mario Six
[U-Boot] [PATCH v2 1/2] misc: uclass: Add enable/disable function Mario Six
[U-Boot] [PATCH v2 2/2] misc: Add gdsys_ioep driver Mario Six
[U-Boot] [PATCH v2 01/10] ram: Add driver for MPC83xx Mario Six
[U-Boot] [PATCH v2 02/10] sysreset: Add get_status method Mario Six
[U-Boot] [PATCH v2 03/10] board_f: Add reset status printing Mario Six
[U-Boot] [PATCH] treewide: Move CONFIG_PHY_MARVELL to Kconfig Mario Six
[U-Boot] [PATCH v2 04/10] mpc83xx: Add sysreset driver Mario Six
[U-Boot] [PATCH v2 05/10] clk: Add MPC83xx clock driver Mario Six
[U-Boot] [PATCH v2 06/10] timer: Add MPC83xx timer driver Mario Six
[U-Boot] [PATCH v2 07/10] common: board_f: Sort includes Mario Six
[U-Boot] [PATCH v2 1/2] net: Initialize as many ethernet devices as possible Mario Six
[U-Boot] [PATCH v2 2/2] tsec: Fix reading phy registers from DT Mario Six
[U-Boot] [PATCH v2] clk: Add ICS8N3QV01 driver Mario Six
[U-Boot] [PATCH v2] reset: Add generic GPIO reset driver Mario Six
[U-Boot] [PATCH v2] gdsys: drivers: Add gdsys_rxaui_ctrl driver Mario Six
[U-Boot] [PATCH v2 1/3] pci: Don't use pci_indirect when DM is active Mario Six
[U-Boot] [PATCH v2 2/3] mpc83xx/pci: Register IMMR region Mario Six
[U-Boot] [PATCH v2 3/3] pci: Add MPC83xx PCIe driver Mario Six
[U-Boot] RPi and iPXE with serial console Mark Snelling
[U-Boot] [PATCH] arm: bitops: fix find_next_zero_bit() for case size < 32 Grygorii Strashko
[U-Boot] [U-Boot, 18/36] rockchip: rk3188: remove rockchip timer as sys timer Heiko Stuebner
[U-Boot] [PATCH] driver: net: fsl-mc: updated copyright info York Sun
[U-Boot] [PATCH][v2] mtd: nand: fsl_ifc: Fix nand waitfunc return value York Sun
[U-Boot] fsl-ifc-nand : Corrected the programming of chip select York Sun
[U-Boot] [PATCH][v2] mtd: nand: fsl_ifc: Fix nand waitfunc return value York Sun
[U-Boot] [PATCH] arm: Add support for Trenz TE0820 (zynqmp) Vladimir Svoboda
[U-Boot] [PATCH 1/2] imx6ul: opos6ul: add SPL_DM support Sébastien Szymanski
[U-Boot] [PATCH 2/2] imx6ul: opos6ul: in Serial Downloader boot mode use ymodem Sébastien Szymanski
[U-Boot] [PATCH v2 1/2] imx6ul: opos6ul: add SPL_DM support Sébastien Szymanski
[U-Boot] [PATCH v2 2/2] imx6ul: opos6ul: in Serial Downloader boot mode use ymodem Sébastien Szymanski
[U-Boot] [PATCH v2 2/2] imx6ul: opos6ul: in Serial Downloader boot mode use ymodem Sébastien Szymanski
[U-Boot] [PATCH v1 06/16] arm: socfpga: misc: Move eth reset to common misc driver Ley Foon Tan
[U-Boot] [PATCH v1 00/16] Add Intel Stratix 10 SoC support Ley Foon Tan
[U-Boot] [PATCH v1 01/16] arm: socfpga: stratix10: Add base address map for Statix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 02/16] arm: socfpga: stratix10: Add clock manager driver for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 03/16] arm: socfpga: stratix10: Add reset manager driver for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 04/16] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch Ley Foon Tan
[U-Boot] [PATCH v1 06/16] arm: socfpga: misc: Move eth reset to common misc driver Ley Foon Tan
[U-Boot] [PATCH v1 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 09/16] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 10/16] arm: dts: Add dts for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 11/16] arm: socfpga: Restructure the SPL file Ley Foon Tan
[U-Boot] [PATCH v1 12/16] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 14/16] ddr: altera: stratix10: Add DDR support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 15/16] board: altera: stratix10: Add socdk board support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 16/16] arm: socfpga: stratix10: Enable Stratix10 SoC build Ley Foon Tan
[U-Boot] [PATCH v1 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch Ley Foon Tan
[U-Boot] [PATCH] pci: intel: Add Intel FPGA PCIe controller driver Ley Foon Tan
[U-Boot] [PATCH v1 01/16] arm: socfpga: stratix10: Add base address map for Statix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch Ley Foon Tan
[U-Boot] [PATCH v1 06/16] arm: socfpga: misc: Move eth reset to common misc driver Ley Foon Tan
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 10/16] arm: dts: Add dts for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Ley Foon Tan
[U-Boot] [RFC] spl: dw_mmc_socfpga: udevice structure is NULL in SPL Ley Foon Tan
[U-Boot] [PATCH v1 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 12/16] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH v1 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC Ley Foon Tan
[U-Boot] [PATCH 0/3] drivers: Add reset ctrl to drivers Ley Foon Tan
[U-Boot] [PATCH 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver Ley Foon Tan
[U-Boot] [PATCH 2/3] serial: ns16550: Add reset ctrl to driver Ley Foon Tan
[U-Boot] [PATCH 3/3] net: designware: Add reset ctrl to driver Ley Foon Tan
[U-Boot] [PATCH 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver Ley Foon Tan
[U-Boot] [PATCH 3/3] net: designware: Add reset ctrl to driver Ley Foon Tan
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Jagan Teki
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux Jagan Teki
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Jagan Teki
[U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux Jagan Teki
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Jagan Teki
[U-Boot] [PATCH v5 00/11] sunxi: update H3/H5/A64 EMAC DT nodes Jagan Teki
[U-Boot] [PATCH v5 00/11] sunxi: update H3/H5/A64 EMAC DT nodes Jagan Teki
[U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
[U-Boot] [PATCH v2 1/2] SPI Flash: add support of sst26wf* flash series Jagan Teki
[U-Boot] [PATCH v2 1/2] SPI Flash: add support of sst26wf* flash series Jagan Teki
[U-Boot] [PATCH v2 1/2] SPI Flash: add support of sst26wf* flash series Jagan Teki
[U-Boot] [PATCH v2 1/2] SPI Flash: add support of sst26wf* flash series Jagan Teki
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Jagan Teki
[U-Boot] [PATCH v4 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops Jagan Teki
[U-Boot] [PATCH v4 0/4] ARM: i.MX6: Add u-boot dtsi files Jagan Teki
[U-Boot] [PATCH v4 1/4] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl Jagan Teki
[U-Boot] [PATCH v4 2/4] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi Jagan Teki
[U-Boot] [PATCH v4 3/4] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl Jagan Teki
[U-Boot] [PATCH v4 4/4] ARM: i.MX6: dts: Build dtb based on SOC type Jagan Teki
[U-Boot] [PATCH v2 0/7] i.MX6DL: Add BTicino Mamoj board support Jagan Teki
[U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support Jagan Teki
[U-Boot] [PATCH v2 2/7] i.MX6DL: mamoj: Add I2C support Jagan Teki
[U-Boot] [PATCH v2 3/7] i.MX6DL: mamoj: Add PFUZE100 support Jagan Teki
[U-Boot] [PATCH v2 4/7] configs: imx6dl_mamoj: Enable fastboot and ums Jagan Teki
[U-Boot] [PATCH v2 5/7] configs: imx6dl-mamoj: Add DFU support Jagan Teki
[U-Boot] [PATCH v2 6/7] configs: imx6dl-mamoj: Add Falcon mode support Jagan Teki
[U-Boot] [PATCH v2 7/7] configs: imx6dl-mamoj: Enable HAB Jagan Teki
[U-Boot] [PATCH v4 0/4] ARM: i.MX6: Add u-boot dtsi files Jagan Teki
[U-Boot] [PATCH v5 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064 Jagan Teki
[U-Boot] [PATCH] sf: Add Spansion s25fl208k entry Jagan Teki
[U-Boot] [PATCH 19/19] spi: mpc8xxx: Add DM support Jagan Teki
[U-Boot] [PATCH v2 0/7] i.MX6DL: Add BTicino Mamoj board support Jagan Teki
[U-Boot] [PATCH] drivers: spi: migrate cf_spi to DM Jagan Teki
[U-Boot] [PATCH 19/19] spi: mpc8xxx: Add DM support Jagan Teki
[U-Boot] [PATCH v5 00/34] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
[U-Boot] [PATCH v5 01/34] usb: sunxi: Simplify ccm reg base code Jagan Teki
[U-Boot] [PATCH v5 02/34] musb: sunxi: Add proper macros instead of numericals Jagan Teki
[U-Boot] [PATCH v5 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata Jagan Teki
[U-Boot] [PATCH v5 04/34] musb: sunxi: Add fifo config Jagan Teki
[U-Boot] [PATCH v5 05/34] sunxi: clock: Fix clock gating for H3/H5/A64 Jagan Teki
[U-Boot] [PATCH v5 06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Jagan Teki
[U-Boot] [PATCH v5 07/34] sunxi: clock: Fix OHCI clock gating for H3/H5 Jagan Teki
[U-Boot] [PATCH v5 08/34] musb: sunxi: Add support for H3/H5A64 Jagan Teki
[U-Boot] [PATCH v5 09/34] phy: Add Allwinner A64 USB PHY driver Jagan Teki
[U-Boot] [PATCH v5 10/34] phy: sun4i-usb: Add id_detect and vbus_detect ops Jagan Teki
[U-Boot] [PATCH v5 11/34] phy: sun4i-usb: Add H3/H5 PHY config Jagan Teki
[U-Boot] [PATCH v5 12/34] phy: sun4i-usb: Add V3S PHY config Jagan Teki
[U-Boot] [PATCH v5 13/34] phy: sun4i-usb: Add A83T USB PHY config Jagan Teki
[U-Boot] [PATCH v5 14/34] phy: sun4i-usb: Add A10/A13/A20 PHY config Jagan Teki
[U-Boot] [PATCH v5 15/34] phy: sun4i-usb: Add A31 PHY config Jagan Teki
[U-Boot] [PATCH v5 16/34] phy: sun4i-usb: Add A33 USB PHY config Jagan Teki
[U-Boot] [PATCH v5 17/34] phy: sun4i-usb: Add A23 USB PHY config Jagan Teki
[U-Boot] [PATCH v5 18/34] device-tree-bindings: phy: Sync sun4i-usb-phy bindings Jagan Teki
[U-Boot] [PATCH v5 19/34] board: sunxi: Use generic-phy for board_usb_cable_connected Jagan Teki
[U-Boot] [PATCH v5 20/34] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect Jagan Teki
[U-Boot] [PATCH v5 21/34] usb: sunxi: Switch to use generic-phy Jagan Teki
[U-Boot] [PATCH v5 22/34] sunxi: Drop legacy usb_phy.c Jagan Teki
[U-Boot] [PATCH v5 23/34] sunxi: h3: Sync OTG and HCI nodes from Linux DT Jagan Teki
[U-Boot] [PATCH v5 24/34] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux Jagan Teki
[U-Boot] [PATCH v5 25/34] configs: bananapi-m64: Enable USB OTG peripheral mode Jagan Teki
[U-Boot] [PATCH v5 26/34] ARM: dts: sun8i: a83t: Sync usbphy node from Linux Jagan Teki
[U-Boot] [PATCH v5 27/34] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux Jagan Teki
[U-Boot] [PATCH v5 28/34] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux Jagan Teki
[U-Boot] [PATCH v5 29/34] configs: bananapi-m2-plus: Enable USB OTG peripheral mode Jagan Teki
[U-Boot] [PATCH v5 30/34] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic Jagan Teki
[U-Boot] [PATCH v5 31/34] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux Jagan Teki
[U-Boot] [PATCH v5 32/34] configs: orangepi-pc2: Enable USB OTG peripheral mode Jagan Teki
[U-Boot] [PATCH v5 33/34] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux Jagan Teki
[U-Boot] [PATCH v5 34/34] configs: orangepi-prime: Enable USB OTG peripheral mode Jagan Teki
[U-Boot] [PATCH] DW SPI: invert wait condition in dw_spi_xfer Jagan Teki
[U-Boot] [PATCH 1/1] sunxi: mmc: Fix phase delays Jagan Teki
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Jagan Teki
[U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver Jagan Teki
[U-Boot] [PATCH v3 2/5] net: sun8i-emac: support R40 GMAC Jagan Teki
[U-Boot] Pull request: u-boot-spi/master Jagan Teki
[U-Boot] [PATCH 1/3] ARM: dts: sun8i: Sync r40 dtsi from Linux Jagan Teki
[U-Boot] [PATCH 2/3] sunxi: sun8i: Add Allwinner V40 support Jagan Teki
[U-Boot] [PATCH 3/3] board: sunxi: sun8i-v4: Add Bananapi M2 Berry support Jagan Teki
[U-Boot] [PATCH 2/3] sunxi: sun8i: Add Allwinner V40 support Jagan Teki
[U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion Jagan Teki
[U-Boot] [PATCH v2 18/18] spi: mpc8xxx: Convert to DM Jagan Teki
[U-Boot] [PATCH v2 18/18] spi: mpc8xxx: Convert to DM Jagan Teki
[U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion Jagan Teki
[U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion Jagan Teki
[U-Boot] [PATCH v2 1/3] spi: omap3_spi: Full dm conversion Jagan Teki
[U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support Jagan Teki
[U-Boot] [PATCH v6 04/34] musb: sunxi: Add fifo config Jagan Teki
[U-Boot] [PATCH v6 06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Jagan Teki
[U-Boot] [PATCH v6] musb: sunxi: Use BIT instead of numerical shift Jagan Teki
[U-Boot] [PATCH v6 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata Jagan Teki
[U-Boot] [PATCH v6 07/34] sunxi: clock: Fix OHCI clock gating for H3/H5 Jagan Teki
[U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support Jagan Teki
[U-Boot] [PATCH v2 2/3] spi: davinci: Full dm conversion Jagan Teki
[U-Boot] [PATCHi v3 2/3] spi: davinci: Full dm conversion Jagan Teki
[U-Boot] [PATCH v1 1/3] spi: sh_qspi: DM conversion Jagan Teki
[U-Boot] [PATCH v1 2/3] spi: sh_spi: DM conversion Jagan Teki
[U-Boot] [PATCH v1 3/3] spi: mxs_spi: DM conversion Jagan Teki
[U-Boot] [PATCH v2 1/2] ARM: dts: sun8i: Sync r40 dtsi from Linux Jagan Teki
[U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v4: Add Bananapi M2 Berry support Jagan Teki
[U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
[U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion Jagan Teki
[U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
[U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion Joakim Tjernlund
[U-Boot] [U-Boot, 18/36] rockchip: rk3188: remove rockchip timer as sys timer Dr. Philipp Tomsich
[U-Boot] [PATCH 1/2] image: fit: Show firmware configuration property if present Dr. Philipp Tomsich
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Dr. Philipp Tomsich
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Dr. Philipp Tomsich
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Dr. Philipp Tomsich
[U-Boot] [RFC PATCH] net: phy: Don't limit phy addresses by default Dr. Philipp Tomsich
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Dr. Philipp Tomsich
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Dr. Philipp Tomsich
[U-Boot] [PATCH v2 2/3] rockchip: rk3128: add ofdata_to_platdata() method for driver Dr. Philipp Tomsich
[U-Boot] [PATCH v2 3/3] rockchip: rv1108: add ofdata_to_platdata() method for driver Dr. Philipp Tomsich
[U-Boot] [U-Boot,2/3] rockchip: rk3188: add timer3 node Dr. Philipp Tomsich
[U-Boot] [PATCH] sysreset: rockchip: use dev_read_addr_ptr get cru base Dr. Philipp Tomsich
[U-Boot] [U-Boot,2/3] rockchip: rk3188: add timer3 node Dr. Philipp Tomsich
[U-Boot] [PULL] Please pull u-boot-rockchip Dr. Philipp Tomsich
[U-Boot] [U-Boot,2/3] rockchip: rk3188: add timer3 node Dr. Philipp Tomsich
[U-Boot] [PATCH v3 1/2] arm: preserve lr correctly in arm926ejs startup code Dr. Philipp Tomsich
[U-Boot] [PATCH v2 1/3] drivers: Add board uclass Dr. Philipp Tomsich
[U-Boot] [PATCH 3/5] api: Flush cache when closing api Dr. Philipp Tomsich
[U-Boot] [U-Boot, 01/36] rockchip: rk3288: move configure_l2ctlr back to rk3288 Philipp Tomsich
[U-Boot] [U-Boot, 02/36] rockchip: add common MACRO to enable sys arch timer Philipp Tomsich
[U-Boot] [U-Boot, 03/36] rockchip: enable SYS_NS16550 for all SoCs by default Philipp Tomsich
[U-Boot] [U-Boot, 04/36] rockchip: defconfig: remove CONFIG_SYS_NS16550 Philipp Tomsich
[U-Boot] [U-Boot,05/36] rockchip: add STIMER_BASE for all SoCs Philipp Tomsich
[U-Boot] [U-Boot, 06/36] rockchip: add IRAM_START_ADDR for all SoCs Philipp Tomsich
[U-Boot] [U-Boot, 08/36] rockchip: rk322x: remove use rockchip timer as sys timer Philipp Tomsich
[U-Boot] [U-Boot, 09/36] rockchip: rk322x: sdram: use common udelay instead of rockchip_udelay Philipp Tomsich
[U-Boot] [U-Boot,32/36] rockchip: remove rk_timer Philipp Tomsich
[U-Boot] [U-Boot, 11/36] rockchip: defconfig enable sysreset for rk3229 spl Philipp Tomsich
[U-Boot] [U-Boot, 12/36] rockchip: rk3036: sdram: use udelay instead of rockchip_udelay Philipp Tomsich
[U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC Philipp Tomsich
[U-Boot] [U-Boot, 07/36] rockchip: rk3328: add BOOT_MODE_REG for rk3328 Philipp Tomsich
[U-Boot] [U-Boot, 10/36] rockchip: rk322x: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot,13/36] rockchip: rk3036: remove sys timer Philipp Tomsich
[U-Boot] [U-Boot, 14/36] rockchip: rk3036: prepare to use commong board file Philipp Tomsich
[U-Boot] [U-Boot, 15/36] rockchip: declare sdram_init() in common header Philipp Tomsich
[U-Boot] [U-Boot, 16/36] rockchip: sdram-common: add api to pass dram info to trust os Philipp Tomsich
[U-Boot] [U-Boot, 17/36] rockchip: sdram_common: add common dram_init_banksize Philipp Tomsich
[U-Boot] [U-Boot, 18/36] rockchip: rk3188: remove rockchip timer as sys timer Philipp Tomsich
[U-Boot] [U-Boot, 19/36] rockchip: rk3188: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 20/36] rockchip: rk3128: remove rockchip timer as systimer Philipp Tomsich
[U-Boot] [U-Boot, 21/36] rockchip: rk3128: prepare use common board file Philipp Tomsich
[U-Boot] [U-Boot, 22/36] rockchip: dts: rk3288: update spl-boot-order Philipp Tomsich
[U-Boot] [U-Boot, 23/36] rockchip: rk3288: remove rockchip timer for sys timer Philipp Tomsich
[U-Boot] [U-Boot, 24/36] armv8: add timer_get_boot_us() for generic timer Philipp Tomsich
[U-Boot] [U-Boot, 25/36] rockchip: rk3288: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 26/36] rockchip: rk1108: remove rockchip timer for sys timer Philipp Tomsich
[U-Boot] [U-Boot, 27/36] rockchip: rv1108: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 28/36] rockchip: rk3328: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 29/36] rockchip: rk3368: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 30/36] rockchip: lion-rk3368: remove rockchip timer Philipp Tomsich
[U-Boot] [U-Boot, 31/36] rockchip: rk3399: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 33/36] rockchip: dts: rk3399-firefly: enable uart2 in spl Philipp Tomsich
[U-Boot] [U-Boot, 34/36] rockchip: spl-boot-order: do not enable with OF_PLATDATA Philipp Tomsich
[U-Boot] [U-Boot, 35/36] rockchip: declear boot_devices in bootrom.h Philipp Tomsich
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Philipp Tomsich
[U-Boot] [U-Boot, 09/36] rockchip: rk322x: sdram: use common udelay instead of rockchip_udelay Philipp Tomsich
[U-Boot] [U-Boot,32/36] rockchip: remove rk_timer Philipp Tomsich
[U-Boot] [U-Boot, 11/36] rockchip: defconfig enable sysreset for rk3229 spl Philipp Tomsich
[U-Boot] [U-Boot,13/36] rockchip: rk3036: remove sys timer Philipp Tomsich
[U-Boot] [U-Boot, 22/36] rockchip: dts: rk3288: update spl-boot-order Philipp Tomsich
[U-Boot] [U-Boot, 34/36] rockchip: spl-boot-order: do not enable with OF_PLATDATA Philipp Tomsich
[U-Boot] [U-Boot, 01/36] rockchip: rk3288: move configure_l2ctlr back to rk3288 Philipp Tomsich
[U-Boot] [U-Boot, 02/36] rockchip: add common MACRO to enable sys arch timer Philipp Tomsich
[U-Boot] [U-Boot, 03/36] rockchip: enable SYS_NS16550 for all SoCs by default Philipp Tomsich
[U-Boot] [U-Boot, 04/36] rockchip: defconfig: remove CONFIG_SYS_NS16550 Philipp Tomsich
[U-Boot] [U-Boot,05/36] rockchip: add STIMER_BASE for all SoCs Philipp Tomsich
[U-Boot] [U-Boot, 06/36] rockchip: add IRAM_START_ADDR for all SoCs Philipp Tomsich
[U-Boot] [U-Boot, 07/36] rockchip: rk3328: add BOOT_MODE_REG for rk3328 Philipp Tomsich
[U-Boot] [U-Boot, 08/36] rockchip: rk322x: remove use rockchip timer as sys timer Philipp Tomsich
[U-Boot] [U-Boot, 10/36] rockchip: rk322x: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 35/36] rockchip: declear boot_devices in bootrom.h Philipp Tomsich
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Philipp Tomsich
[U-Boot] [U-Boot, 30/36] rockchip: lion-rk3368: remove rockchip timer Philipp Tomsich
[U-Boot] [U-Boot, 29/36] rockchip: rk3368: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 33/36] rockchip: dts: rk3399-firefly: enable uart2 in spl Philipp Tomsich
[U-Boot] [U-Boot, 16/36] rockchip: sdram-common: add api to pass dram info to trust os Philipp Tomsich
[U-Boot] [U-Boot, 12/36] rockchip: rk3036: sdram: use udelay instead of rockchip_udelay Philipp Tomsich
[U-Boot] [U-Boot, 14/36] rockchip: rk3036: prepare to use commong board file Philipp Tomsich
[U-Boot] [U-Boot, 15/36] rockchip: declare sdram_init() in common header Philipp Tomsich
[U-Boot] [U-Boot, 17/36] rockchip: sdram_common: add common dram_init_banksize Philipp Tomsich
[U-Boot] [U-Boot, 18/36] rockchip: rk3188: remove rockchip timer as sys timer Philipp Tomsich
[U-Boot] [U-Boot, 21/36] rockchip: rk3128: prepare use common board file Philipp Tomsich
[U-Boot] [U-Boot, 24/36] armv8: add timer_get_boot_us() for generic timer Philipp Tomsich
[U-Boot] [U-Boot, 31/36] rockchip: rk3399: prepare to use common board file Philipp Tomsich
[U-Boot] [U-Boot, 2/2] config: evb-rk3399: enable make uboot.itb Philipp Tomsich
[U-Boot] [U-Boot, 1/2] arm: rockchip: make_fit_atf: remove unneeded imports Philipp Tomsich
[U-Boot] [U-Boot,1/1] rockchip: rk3288: provide ${fdtfile} Philipp Tomsich
[U-Boot] [U-Boot, v1] rockchip: defconfig: puma-rk3399: enable RTC Philipp Tomsich
[U-Boot] [U-Boot, 1/3] rockchip: rk3188: add -u-boot.dtsi for rock-rk3188 Philipp Tomsich
[U-Boot] [U-Boot,2/3] rockchip: rk3188: add timer3 node Philipp Tomsich
[U-Boot] [U-Boot, 3/3] rockchip: rk3188: use DM timer instead of rk_timer Philipp Tomsich
[U-Boot] [U-Boot, v2, 1/3] rockchip: rk3036: add ofdata_to_platdata() method for driver Philipp Tomsich
[U-Boot] [U-Boot, 2/2] config: evb-rk3399: enable make uboot.itb Philipp Tomsich
[U-Boot] [U-Boot, 1/2] arm: rockchip: make_fit_atf: remove unneeded imports Philipp Tomsich
[U-Boot] [U-Boot,1/1] rockchip: rk3288: provide ${fdtfile} Philipp Tomsich
[U-Boot] [U-Boot, v1] rockchip: defconfig: puma-rk3399: enable RTC Philipp Tomsich
[U-Boot] [U-Boot, 1/3] rockchip: rk3188: add -u-boot.dtsi for rock-rk3188 Philipp Tomsich
[U-Boot] [U-Boot, 3/3] rockchip: rk3188: use DM timer instead of rk_timer Philipp Tomsich
[U-Boot] [U-Boot, v2, 1/3] rockchip: rk3036: add ofdata_to_platdata() method for driver Philipp Tomsich
[U-Boot] rockchip: rk322x: update TPL_TEXT_BASE Philipp Tomsich
[U-Boot] rockchip: rk322x: update MACRO for back-to-brom Philipp Tomsich
[U-Boot] Revert "rockchip: firefly: Add "usb start" to auto-start USB device" Philipp Tomsich
[U-Boot] [U-Boot, v2, 1/2] rockchip: enable SYS_NS16550 for all SoCs by default Philipp Tomsich
[U-Boot] [U-Boot, v2, 2/2] rockchip: defconfig: remove CONFIG_SYS_NS16550 Philipp Tomsich
[U-Boot] rockchip: rk322x: update TPL_TEXT_BASE Philipp Tomsich
[U-Boot] rockchip: rk322x: update MACRO for back-to-brom Philipp Tomsich
[U-Boot] Revert "rockchip: firefly: Add "usb start" to auto-start USB device" Philipp Tomsich
[U-Boot] [U-Boot, v2, 1/2] rockchip: enable SYS_NS16550 for all SoCs by default Philipp Tomsich
[U-Boot] [U-Boot, v2, 2/2] rockchip: defconfig: remove CONFIG_SYS_NS16550 Philipp Tomsich
[U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC Philipp Tomsich
[U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC Philipp Tomsich
[U-Boot] [U-Boot,1/1] rockchip: rk3288: provide ${fdtfile} Philipp Tomsich
[U-Boot] [U-Boot, v1] rockchip: defconfig: puma-rk3399: enable RTC Philipp Tomsich
[U-Boot] [U-Boot, 1/3] rockchip: rk3188: add -u-boot.dtsi for rock-rk3188 Philipp Tomsich
[U-Boot] [U-Boot,2/3] rockchip: rk3188: add timer3 node Philipp Tomsich
[U-Boot] [U-Boot, 3/3] rockchip: rk3188: use DM timer instead of rk_timer Philipp Tomsich
[U-Boot] [U-Boot, 1/2] arm: rockchip: make_fit_atf: remove unneeded imports Philipp Tomsich
[U-Boot] [U-Boot, 2/2] config: evb-rk3399: enable make uboot.itb Philipp Tomsich
[U-Boot] [U-Boot, v2, 1/3] rockchip: rk3036: add ofdata_to_platdata() method for driver Philipp Tomsich
[U-Boot] [U-Boot, v2, 2/3] rockchip: rk3128: add ofdata_to_platdata() method for driver Philipp Tomsich
[U-Boot] [U-Boot, v2, 3/3] rockchip: rv1108: add ofdata_to_platdata() method for driver Philipp Tomsich
[U-Boot] rockchip: rk322x: update TPL_TEXT_BASE Philipp Tomsich
[U-Boot] rockchip: rk322x: update MACRO for back-to-brom Philipp Tomsich
[U-Boot] Revert "rockchip: firefly: Add "usb start" to auto-start USB device" Philipp Tomsich
[U-Boot] [U-Boot, v2, 1/2] rockchip: enable SYS_NS16550 for all SoCs by default Philipp Tomsich
[U-Boot] [U-Boot, v2, 2/2] rockchip: defconfig: remove CONFIG_SYS_NS16550 Philipp Tomsich
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Michael Nazzareno Trimarchi
[U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver Michael Nazzareno Trimarchi
[U-Boot] [linux-sunxi] Re: [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux Chen-Yu Tsai
[U-Boot] [PATCH v5 03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata Chen-Yu Tsai
[U-Boot] [PATCH 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
[U-Boot] [PATCH 1/5] sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver. Chen-Yu Tsai
[U-Boot] [PATCH 2/5] sunxi: Split out common board design for ALL-H3-CC device tree Chen-Yu Tsai
[U-Boot] [PATCH 3/5] sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. Chen-Yu Tsai
[U-Boot] [PATCH 4/5] sunxi: Add Libre Computer Board ALL-H3-CC H5 ver. Chen-Yu Tsai
[U-Boot] [PATCH 5/5] sunxi: Sort dts Makefile entries for H3 Chen-Yu Tsai
[U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
[U-Boot] [PATCH v2 1/5] sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver. Chen-Yu Tsai
[U-Boot] [PATCH v2 2/5] sunxi: Split out common board design for ALL-H3-CC device tree Chen-Yu Tsai
[U-Boot] [PATCH v2 3/5] sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. Chen-Yu Tsai
[U-Boot] [PATCH v2 4/5] sunxi: Add Libre Computer Board ALL-H3-CC H5 ver. Chen-Yu Tsai
[U-Boot] [PATCH v2 5/5] sunxi: Sort dts Makefile entries for H3 Chen-Yu Tsai
[U-Boot] [PATCH 1/3] serial: Migrate CONFIG_ARC_SERIAL to Kconfig Tuomas Tynkkynen
[U-Boot] [PATCH 2/3] serial: Migrate CONFIG_MCFUART Tuomas Tynkkynen
[U-Boot] [PATCH 3/3] serial: Migrate CONFIG_ARM_DCC to Kconfig Tuomas Tynkkynen
[U-Boot] [PATCH 1/2] ARM: s32v234evb: Set CONFIG_DM & CONFIG_DM_SERIAL in Kconfig Tuomas Tynkkynen
[U-Boot] [PATCH 2/2] serial: Migrate CONFIG_FSL_LINFLEXUART to Kconfig Tuomas Tynkkynen
[U-Boot] [PATCH 1/2] ARM: qemu-arm: Dynamically determine timer frequency Tuomas Tynkkynen
[U-Boot] [PATCH 2/2] arm: move SYS_ARCH_TIMER to KConfig Tuomas Tynkkynen
[U-Boot] [RFC PATCH 03/13] arm: move SYS_ARCH_TIMER to KConfig Tuomas Tynkkynen
[U-Boot] [PATCH] rpi: Adjust fdt_addr_r to a sane address Tuomas Tynkkynen
[U-Boot] [PATCH] rpi: Adjust fdt_addr_r to a sane address Tuomas Tynkkynen
[U-Boot] [PATCH 1/2] rpi: Fix fdt_high & initrd_high for 64-bit builds Tuomas Tynkkynen
[U-Boot] [PATCH 2/2] rpi: Change load addresses to make more room for the kernel & DTB Tuomas Tynkkynen
[U-Boot] [PATCH] rpi: Adjust fdt_addr_r to a sane address Tuomas Tynkkynen
[U-Boot] [PATCH] powerpc: mpc85xx: Improve Work-around for Erratum A005125 Takuma Ueba
[U-Boot] [PATCH] powerpc: mpc85xx: Improve Work-around for Erratum A005125 Takuma Ueba
[U-Boot] [PATCH] powerpc: mpc85xx: Fix Work-around for Erratum A005125 Takuma Ueba
[U-Boot] [PATCH 0/5] Add KConfig option for cache maintenance availability Emmanuel Vadot
[U-Boot] [PATCH 1/5] arch: Add SYS_HAVE_DCACHE_MAINTENANCE and SYS_HAVE_ICACHE_MAINTENANCE Emmanuel Vadot
[U-Boot] [PATCH 2/5] arch: arm: Select SYS_HAVE_{D, I}CACHE_MAINTENANCE kconfig where appropriate Emmanuel Vadot
[U-Boot] [PATCH 3/5] api: Flush cache when closing api Emmanuel Vadot
[U-Boot] [PATCH 4/5] cmd: go: Flush cache before starting Emmanuel Vadot
[U-Boot] [PATCH 5/5] cmd: bootelf: Flush cache before starting Emmanuel Vadot
[U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK Marek Vasut
[U-Boot] [PATCH] reset: socfpga: add reset driver for SoCFPGA platform Marek Vasut
[U-Boot] [PATCH] reset: socfpga: add reset driver for SoCFPGA platform Marek Vasut
[U-Boot] [PATCHv2 1/6] reset: socfpga: add reset driver for SoCFPGA platform Marek Vasut
[U-Boot] [PATCH 0/6] reset: add reset driver for SoCFPGA Marek Vasut
[U-Boot] [PATCHv2 1/6] reset: socfpga: add reset driver for SoCFPGA platform Marek Vasut
[U-Boot] [PATCH] spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig Marek Vasut
[U-Boot] [PATCH] tpl: spi: Add CONFIG_TPL_SPI_LOAD to Kconfig Marek Vasut
[U-Boot] [PATCH] tpl: ymodem: Add CONFIG_TPL_YMODEM_SUPPORT to Kconfig Marek Vasut
[U-Boot] [PATCH] serial: Fix Makefile during SPL and TPL build Marek Vasut
[U-Boot] [PATCH] ARM: Fix Makefile during SPL and TPL build Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Split U-Boot and SPL sources on Porter Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Do not init caches in TPL before DRAM Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Add TPL support on R8A7791 M2 Porter Marek Vasut
[U-Boot] [PATCH] spl: ram: Convert to CONFIG_IS_ENABLED Marek Vasut
[U-Boot] [PATCH] spl: ram: Add TPL Kconfig symbols Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Add JTAG recovery support for M2 Porter Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Enable HUSH on M2 Porter Marek Vasut
[U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2 Marek Vasut
[U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2 Marek Vasut
[U-Boot] [PATCH 01/15] mmc: uniphier: Factor out FIFO accessors Marek Vasut
[U-Boot] [PATCH 02/15] mmc: uniphier: Drop useless check Marek Vasut
[U-Boot] [PATCH 03/15] mmc: uniphier: Add support for 16bit variant Marek Vasut
[U-Boot] [PATCH 04/15] mmc: uniphier: Allow passing quirks to the probe function Marek Vasut
[U-Boot] [PATCH 05/15] mmc: renesas-sdhi: Handle 16bit IP Marek Vasut
[U-Boot] [PATCH 06/15] mmc: matsushita-common: Use mmc_of_parse() Marek Vasut
[U-Boot] [PATCH 07/15] mmc: matsushita-common: Add Renesas RCar quirks Marek Vasut
[U-Boot] [PATCH 08/15] mmc: matsushita-common: Handle Renesas div-by-1 Marek Vasut
[U-Boot] [PATCH 09/15] mmc: matsushita-common: Handle DMA completion flag differences Marek Vasut
[U-Boot] [PATCH 10/15] mmc: matsushita-common: Handle bus width 0 Marek Vasut
[U-Boot] [PATCH 11/15] mmc: matsushita-common: Always check controller version Marek Vasut
[U-Boot] [PATCH 12/15] mmc: matsushita-common: Properly handle pin voltage configuration Marek Vasut
[U-Boot] [PATCH 13/15] mmc: matsushita-common: Export register access functions Marek Vasut
[U-Boot] [PATCH 14/15] mmc: renesas-sdhi: Add Renesas SDR104/HS200 tuning support Marek Vasut
[U-Boot] [PATCH 15/15] ARM: rmobile: Enable HS200 mode on RCar Gen3 Marek Vasut
[U-Boot] [PATCH 1/5] mmc: matsushita-common: Special case only select registers in 16bit Marek Vasut
[U-Boot] [PATCH 2/5] mmc: matsushita-common: Correctly set mode in 16bit Marek Vasut
[U-Boot] [PATCH 3/5] mmc: matsushita-common: Wait for command completion Marek Vasut
[U-Boot] [PATCH 4/5] mmc: matsushita-common: Add missing else Marek Vasut
[U-Boot] [PATCH 5/5] mmc: renesas-sdhi: Wait after reconfiguring pins Marek Vasut
[U-Boot] [PATCH] mtd: rpc: Add Renesas RPC Hyperflash driver Marek Vasut
[U-Boot] [PATCH] mtd: spi: Add Renesas RPC SPI-flash driver Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Fix the memory map on Gen3 Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Set maximum kernel size to 64 MiB on Gen3 Marek Vasut
[U-Boot] [PATCH 1/4] spi: sh_qspi: Replace data types with short ones Marek Vasut
[U-Boot] [PATCH 2/4] spi: sh_qspi: Drop SPBDCR wait Marek Vasut
[U-Boot] [PATCH 3/4] spi: sh_qspi: Replace ad hoc waiting with wait_for_bit Marek Vasut
[U-Boot] [PATCH 4/4] spi: sh_qspi: Make use of the 32byte FIFO Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] [PATCH v2 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Marek Vasut
[U-Boot] [PATCH v2 u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration Marek Vasut
[U-Boot] [PATCH v3 u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Set maximum kernel size to 64 MiB on Gen3 Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] [PATCH] usb: dwc3-of-simple: fix error check of clk_get_bulk when disabled Marek Vasut
[U-Boot] [PATCH v4 01/11] usb: dwc3-of-simple: Fix dependencies Marek Vasut
[U-Boot] [PATCH v4 02/11] usb: dwc3-of-simple: Add support for DRA7/AM57 platforms. Marek Vasut
[U-Boot] [PATCH v4 00/11] Add support for DM_USB for TI's DRA7 EVMs and AM57 EVMs platforms Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit Marek Vasut
[U-Boot] [PATCH] configs: socfpga: disable EFI and ISO partition types Marek Vasut
[U-Boot] [PATCH] clk: renesas: Minor clean up of the R8A7790 clock driver Marek Vasut
[U-Boot] [PATCH] net: sh_eth: Add remaining Gen2 DT compatible Marek Vasut
[U-Boot] [PATCH] serial: sh: Add SCIFA0 address entry Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Enable SCIFA0 early on H2 Stout Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Fix LBSC programming offset on M2 Porter Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Update H2 Stout Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Shrink the TPL Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Convert TPL to SPL Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Zap CONFIG_MMC_RENESAS_TUNING Marek Vasut
[U-Boot] [PATCH] mmc: tmio: Rename Matsushita to TMIO Marek Vasut
[U-Boot] [PATCH V2] ARM: rmobile: Zap CONFIG_MMC_RENESAS_TUNING Marek Vasut
[U-Boot] [RFC][PATCH] cmd: fdt: Fix fdt address information after the movement Marek Vasut
[U-Boot] [U-Boot, v2, u-boot, 1/2] reset: Add get/assert/deassert/release for bulk of reset signals Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PATCH] mmc: Staticize sd_select_bus_width Marek Vasut
[U-Boot] [PATCH] mmc: Improve tinification Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] net: sh_eth: Add remaining Gen2 DT compatible Marek Vasut
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 Marek Vasut
[U-Boot] [PATCH 2/5] image: socfpga: Add SFP image version 1 definition Marek Vasut
[U-Boot] [PATCH 3/5] tools: socfpga: Stop using global struct socfpga_image Marek Vasut
[U-Boot] [PATCH 4/5] tools: socfpga: Add SFP image V1 support Marek Vasut
[U-Boot] [PATCH 5/5] spl: socfpga: Generate Arria10 SFP header V1 Marek Vasut
[U-Boot] net: sh_eth: Add remaining Gen2 DT compatible Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Add Renesas RPC HF/QSPI DT nodes Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Enable RPC QSPI on R8A77970 V3M Eagle Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Enable fitImage support on Gen3 Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Add rudimentary SDHI2 node on R8A77970 V3M Eagle Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Enable SDHI2 on R8A77970 V3M Eagle Marek Vasut
[U-Boot] [PATCH V2] ARM: rmobile: Add rudimentary SDHI2 node on R8A77970 V3M Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Add rudimentary SDHI2 node on R8A77970 V3M Eagle Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Disable SDHI on R8A77970 V3M Eagle Marek Vasut
[U-Boot] [PATCH 1/3] common: Let board decide if env should be loaded Marek Vasut
[U-Boot] [PATCH 2/3] ARM: rmobile: Ignore U-Boot env when started via JTAG on Porter Marek Vasut
[U-Boot] [PATCH 3/3] ARM: rmobile: Ignore U-Boot env when started via JTAG on Stout Marek Vasut
[U-Boot] [PATCH 1/2] ARM: rmobile: Ignore U-Boot env when started via JTAG on Stout Marek Vasut
[U-Boot] [PATCH 2/2] ARM: rmobile: Ignore U-Boot env when started via JTAG on Porter Marek Vasut
[U-Boot] [PATCH 1/3] common: Let board decide if env should be loaded Marek Vasut
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 Marek Vasut
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 Marek Vasut
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Update M2 Koelsch Marek Vasut
[U-Boot] u-boot-usb/master build failure on dra7xx_evm Marek Vasut
[U-Boot] [PULL] u-boot-socfpga/master Marek Vasut
[U-Boot] u-boot-usb/master build failure on dra7xx_evm Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PATCH v1] arm: mxs: make startup code thumb compatible Marek Vasut
[U-Boot] [PATCH v1 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch Marek Vasut
[U-Boot] [PATCH v1 06/16] arm: socfpga: misc: Move eth reset to common misc driver Marek Vasut
[U-Boot] [PATCH v1 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 09/16] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 10/16] arm: dts: Add dts for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 12/16] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 14/16] ddr: altera: stratix10: Add DDR support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 01/16] arm: socfpga: stratix10: Add base address map for Statix10 SoC Marek Vasut
[U-Boot] [PATCH v1 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch Marek Vasut
[U-Boot] [PATCH v1 06/16] arm: socfpga: misc: Move eth reset to common misc driver Marek Vasut
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1] arm: mxs: make startup code thumb compatible Marek Vasut
[U-Boot] [PATCH 1/5] ARM: socfpga: Add boot trampoline for Arria10 Marek Vasut
[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver Marek Vasut
[U-Boot] [PATCH v1 2/3] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH v1 3/3] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration Marek Vasut
[U-Boot] [PATCH v1 01/16] arm: socfpga: stratix10: Add base address map for Statix10 SoC Marek Vasut
[U-Boot] [PATCH v1 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PATCH v2 1/2] arm: make arm926ejs startup code thumb compatible Marek Vasut
[U-Boot] [PATCH] clk: renesas: Minor clean up of the R8A7792 clock driver Marek Vasut
[U-Boot] [PATCH] clk: renesas: Minor clean up of the R8A7794 clock driver Marek Vasut
[U-Boot] [PATCH 1/3] mmc: sh_mmcif: Add DM and DT probing support Marek Vasut
[U-Boot] [PATCH 2/3] mmc: sh_mmcif: Add Kconfig entry Marek Vasut
[U-Boot] [PATCH 3/3] mmc: sh_mmcif: Migrate configs to CONFIG_SH_MMCIF Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Update E2 Silk Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 13/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Enable HS200 support on M3N Salvator-X Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Update H2 Lager Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Update M2-N Gose Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Update E2 Alt Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Fix PMIC address on E2 Silk Marek Vasut
[U-Boot] dm: mmc: socfpga: call dwmci_probe() Marek Vasut
[U-Boot] [PATCH] usb: host: dwc3: fix phys init Marek Vasut
[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver Marek Vasut
[U-Boot] [PATCH v1 2/3] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH] usb: gadget: composite: fix NULL pointer when a non standard request is received Marek Vasut
[U-Boot] [RESEND][PATCH v1] phy: add support for STM32 usb phy controller Marek Vasut
[U-Boot] [PATCH] usb: f_mass_storage: Fix compile on x86 Marek Vasut
[U-Boot] [PATCH] usb: f_mass_storage: Fix compile on x86 Marek Vasut
[U-Boot] [PATCH v3 1/2] arm: preserve lr correctly in arm926ejs startup code Marek Vasut
[U-Boot] [PATCH v2] usb: f_mass_storage: Fix compile on x86 Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PULL] u-boot-socfpga/master Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH v1 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC Marek Vasut
[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver Marek Vasut
[U-Boot] [PATCH v1 2/3] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH v1 12/16] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC Marek Vasut
[U-Boot] [RESEND][PATCH v1] phy: add support for STM32 usb phy controller Marek Vasut
[U-Boot] [PATCH 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver Marek Vasut
[U-Boot] [PATCH 2/3] serial: ns16550: Add reset ctrl to driver Marek Vasut
[U-Boot] [PATCH v1 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC Marek Vasut
[U-Boot] dm: mmc: socfpga: call dwmci_probe() Marek Vasut
[U-Boot] [PATCH v2] phy: add support for STM32 usb phy controller Marek Vasut
[U-Boot] [PATCH v2] phy: add support for STM32 usb phy controller Marek Vasut
[U-Boot] [GIT] Pull request: u-boot-dfu (30.04.2018) Marek Vasut
[U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8 Vasyl Vavrychuk
[U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8 Vasyl Vavrychuk
[U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8 Vasyl Vavrychuk
[U-Boot] [PATCH v2] vxworks: fixed cpu enable using PSCI on armv8 Vasyl Vavrychuk
[U-Boot] [PATCH v2] Allow providing default environment from file Rasmus Villemoes
[U-Boot] [PATCH v2 1/2] Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Petr Vorel
[U-Boot] [PATCH v2 2/2] Cleanup CONFIG_VERSION_VARIABLE migration Petr Vorel
[U-Boot] [PATCH v2 1/2] Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Petr Vorel
[U-Boot] [PATCH 1/2] arm: Add minimal support for Cortex-R5 Lokesh Vutla
[U-Boot] [PATCH 1/2] arm: Add minimal support for Cortex-R5 Lokesh Vutla
[U-Boot] [PATCH 1/2] arm: Add minimal support for Cortex-R5 Lokesh Vutla
[U-Boot] [RFC PATCH 0/5] arm: Introduce v7R support Lokesh Vutla
[U-Boot] [RFC PATCH 1/5] arm: v7: Update VBAR only if available Lokesh Vutla
[U-Boot] [RFC PATCH 2/5] arm: v7R: Add initial support Lokesh Vutla
[U-Boot] [RFC PATCH 3/5] arm: Kconfig: Add entry for MMU Lokesh Vutla
[U-Boot] [RFC PATCH 4/5] arm: v7R: Add support for MPU Lokesh Vutla
[U-Boot] [RFC PATCH 5/5] arm: v7R: Add support for enabling caches Lokesh Vutla
[U-Boot] [RFC PATCH 2/5] arm: v7R: Add initial support Lokesh Vutla
[U-Boot] [RFC PATCH 3/5] arm: Kconfig: Add entry for MMU Lokesh Vutla
[U-Boot] [RFC PATCH 4/5] arm: v7R: Add support for MPU Lokesh Vutla
[U-Boot] [RFC PATCH 5/5] arm: v7R: Add support for enabling caches Lokesh Vutla
[U-Boot] [RFC PATCH 0/5] arm: Introduce v7R support Lokesh Vutla
[U-Boot] [RFC PATCH 4/5] arm: v7R: Add support for MPU Lokesh Vutla
[U-Boot] [PATCH 0/7] arm: Introduce v7R support Lokesh Vutla
[U-Boot] [PATCH 1/7] arm: v7: Update VBAR only if available Lokesh Vutla
[U-Boot] [PATCH 2/7] arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A Lokesh Vutla
[U-Boot] [PATCH 3/7] arm: v7: Kconfig: Add entry for MMU Lokesh Vutla
[U-Boot] [PATCH 4/7] arm: v7: Kconfig: Introduce SYS_ARM_CACHE_CP15 Lokesh Vutla
[U-Boot] [PATCH 5/7] arm: v7R: Add initial support Lokesh Vutla
[U-Boot] [PATCH 6/7] arm: v7R: Add support for MPU Lokesh Vutla
[U-Boot] [PATCH 7/7] arm: v7R: Add support for enabling caches Lokesh Vutla
[U-Boot] [PATCH 7/7] arm: v7R: Add support for enabling caches Lokesh Vutla
[U-Boot] [PATCH 6/7] arm: v7R: Add support for MPU Lokesh Vutla
[U-Boot] [PATCH v2 0/7] arm: Introduce v7R support Lokesh Vutla
[U-Boot] [PATCH v2 1/7] arm: v7: Update VBAR only if available Lokesh Vutla
[U-Boot] [PATCH v2 2/7] arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A Lokesh Vutla
[U-Boot] [PATCH v2 3/7] arm: v7: Kconfig: Add entry for MMU Lokesh Vutla
[U-Boot] [PATCH v2 4/7] arm: v7: Kconfig: Introduce SYS_ARM_CACHE_CP15 Lokesh Vutla
[U-Boot] [PATCH v2 5/7] arm: v7R: Add initial support Lokesh Vutla
[U-Boot] [PATCH v2 6/7] arm: v7R: Add support for MPU Lokesh Vutla
[U-Boot] [PATCH v2 7/7] arm: v7R: Add support for enabling caches Lokesh Vutla
[U-Boot] [PATCH 3/6] tegra: psci: save context id in cpu_on command Stephen Warren
[U-Boot] [PATCH v2 1/3] arm: psci: save context id for cpu_on PSCI command Stephen Warren
[U-Boot] [PATCHv1 14/14] reset: remove request and free functions Stephen Warren
[U-Boot] [PATCH 3/6] tegra: psci: save context id in cpu_on command Stephen Warren
[U-Boot] [PATCH v2] tools: buildman: Don't use the working dir as build dir Lothar Waßmann
[U-Boot] mainline u-boot on radxarock (rockchip rk3188) from SDcard Trevor Woerner
[U-Boot] mainline u-boot on radxarock (rockchip rk3188) from SDcard Trevor Woerner
[U-Boot] [PATCH] README.sandbox: small typos Trevor Woerner
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Scott Wood
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Scott Wood
[U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank Scott Wood
[U-Boot] [PULL] u-boot-sh/master Masahiro Yamada
[U-Boot] [PATCH] ARM: dts: uniphier: sync DT with Linux 4.17-rc1 Masahiro Yamada
[U-Boot] [PATCH] kbuild: use -fmacro-prefix-map to make __FILE__ a relative path Masahiro Yamada
[U-Boot] [PATCH 03/12] libfdt: Safer access to strings section Masahiro Yamada
[U-Boot] [PATCH 0/4] Add Linux-compatible syscon_to_regmap API Masahiro Yamada
[U-Boot] [PATCH 1/4] regmap: clean up regmap allocation Masahiro Yamada
[U-Boot] [PATCH 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Masahiro Yamada
[U-Boot] [PATCH 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice Masahiro Yamada
[U-Boot] [PATCH 4/4] syscon: add Linux-compatible syscon API Masahiro Yamada
[U-Boot] [PATCH] clk: uniphier: add ethernet clock control support Masahiro Yamada
[U-Boot] [PATCH] reset: uniphier: add ethernet reset control support Masahiro Yamada
[U-Boot] [PATCH] ARM: dts: uniphier: sync DT with Linux 4.17-rc1 Masahiro Yamada
[U-Boot] [GIT PULL] u-boot-uniphier/master Masahiro Yamada
[U-Boot] [PATCH v2 0/4] Add Linux-compatible syscon_to_regmap API Masahiro Yamada
[U-Boot] [PATCH v2 1/4] regmap: clean up regmap allocation Masahiro Yamada
[U-Boot] [PATCH v2 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Masahiro Yamada
[U-Boot] [PATCH v2 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice Masahiro Yamada
[U-Boot] [PATCH v2 4/4] syscon: add Linux-compatible syscon API Masahiro Yamada
[U-Boot] [PATCH] distro: use imply to default to DISTRO_DEFAULTS Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: increase CONFIG_SYS_MONITOR_LEN Masahiro Yamada
[U-Boot] [PATCH v2 1/3] arm: psci: save context id for cpu_on PSCI command Masahiro Yamada
[U-Boot] [PATCH 4/6] uniphier: psci: save context id in cpu_on command Masahiro Yamada
[U-Boot] [PATCH 0/4] ARM: uniphier: decrease the SPL image size to fix uniphier_v7_defconfig Masahiro Yamada
[U-Boot] [PATCH 1/4] mmc: tmio: move clk_enable() to each driver's probe function Masahiro Yamada
[U-Boot] [PATCH 2/4] mmc: uniphier-sd: skip clock set-up for SPL Masahiro Yamada
[U-Boot] [PATCH 3/4] ARM: dts: uniphier: drop u-boot, dm-pre-reloc from SD/eMMC clock node Masahiro Yamada
[U-Boot] [PATCH 4/4] clk: uniphier: disable SPL_CLK Masahiro Yamada
[U-Boot] [PATCH 1/4] mmc: tmio: move clk_enable() to each driver's probe function Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: select a correct mmc device before flashing images Masahiro Yamada
[U-Boot] [PATCH] test: regmap: test Linux-compatible syscon_node_to_regmap() Masahiro Yamada
[U-Boot] [PATCH v2 1/4] regmap: clean up regmap allocation Masahiro Yamada
[U-Boot] [PATCH 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Masahiro Yamada
[U-Boot] [PATCH 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice Masahiro Yamada
[U-Boot] [PATCH 4/4] syscon: add Linux-compatible syscon API Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: move SPL stack address Masahiro Yamada
[U-Boot] [PATCH 0/4] ARM: uniphier: decrease the SPL image size to fix uniphier_v7_defconfig Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: select a correct mmc device before flashing images Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: move SPL stack address Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: increase CONFIG_SYS_MONITOR_LEN Masahiro Yamada
[U-Boot] [GIT PULL] u-boot-uniphier/master Masahiro Yamada
[U-Boot] [GIT PULL] u-boot-uniphier/master Masahiro Yamada
[U-Boot] DWC3 USB driver regression Masahiro Yamada
[U-Boot] DWC3 USB driver regression Masahiro Yamada
[U-Boot] [PATCH v2] distro: use imply to enable DISTRO_DEFAULTS as SoC default Masahiro Yamada
[U-Boot] [PATCH] usb: host: dwc3: fix phys init Masahiro Yamada
[U-Boot] [PATCH] distro: select CMD_ENV_EXISTS Masahiro Yamada
[U-Boot] [Question] How to create a file in a directory Masahiro Yamada
[U-Boot] [PATCH] test: ofnode: test ofnode_device_is_compatible() Masahiro Yamada
[U-Boot] [PATCH v2 2/4] dm: ofnode: add ofnode_device_is_compatible() helper Masahiro Yamada
[U-Boot] [PATCH] test: dm: regmap: fix license header Masahiro Yamada
[U-Boot] [U-Boot, 01/36] rockchip: rk3288: move configure_l2ctlr back to rk3288 Kever Yang
[U-Boot] [U-Boot, 02/36] rockchip: add common MACRO to enable sys arch timer Kever Yang
[U-Boot] [U-Boot,05/36] rockchip: add STIMER_BASE for all SoCs Kever Yang
[U-Boot] [U-Boot, 06/36] rockchip: add IRAM_START_ADDR for all SoCs Kever Yang
[U-Boot] [U-Boot, 16/36] rockchip: sdram-common: add api to pass dram info to trust os Kever Yang
[U-Boot] [U-Boot, 17/36] rockchip: sdram_common: add common dram_init_banksize Kever Yang
[U-Boot] [U-Boot, 30/36] rockchip: lion-rk3368: remove rockchip timer Kever Yang
[U-Boot] [U-Boot, 31/36] rockchip: rk3399: prepare to use common board file Kever Yang
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Kever Yang
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Kever Yang
[U-Boot] [U-Boot, 36/36] rockchip: add common board file for rockchip platform Kever Yang
[U-Boot] [PATCH 1/1] rockchip: rk3288: provide ${fdtfile} Kever Yang
[U-Boot] [PATCH 1/1] rockchip: rk3288: provide ${fdtfile} Kever Yang
[U-Boot] [PATCH 1/3] rockchip: rk3188: add -u-boot.dtsi for rock-rk3188 Kever Yang
[U-Boot] [PATCH 2/3] rockchip: rk3188: add timer3 node Kever Yang
[U-Boot] [PATCH 3/3] rockchip: rk3188: use DM timer instead of rk_timer Kever Yang
[U-Boot] [PATCH] rockchip: rk322x: update TPL_TEXT_BASE Kever Yang
[U-Boot] [PATCH] rockchip: rk322x: update MACRO for back-to-brom Kever Yang
[U-Boot] [PATCH 1/3] rockchip: rk3036: add ofdata_to_platdata() callback for driver Kever Yang
[U-Boot] [PATCH 2/3] rockchip: rk3128: add ofdata_to_platdata() callback for driver Kever Yang
[U-Boot] [PATCH 3/3] rockchip: rv1108: add ofdata_to_platdata() callback for driver Kever Yang
[U-Boot] [PATCH] pinctrl: do not set_state for device without valid ofnode Kever Yang
[U-Boot] [PATCH] Revert "rockchip: firefly: Add "usb start" to auto-start USB device" Kever Yang
[U-Boot] [PATCH 0/8] rockchip: conver to use ARM arch timer for armv7 SoCs Kever Yang
[U-Boot] [PATCH 1/8] rockchip: add STIMER_BASE for Rockchip SoCs Kever Yang
[U-Boot] [PATCH 2/8] rockchip: rk322x: sdram: use udelay instead of rockchip_udelay Kever Yang
[U-Boot] [PATCH 3/8] rockchip: rk322x: use ARM arch timer instead of rk_timer Kever Yang
[U-Boot] [PATCH 4/8] rockchip: rk3036: sdram: use udelay instead of rockchip_udelay Kever Yang
[U-Boot] [PATCH 5/8] rockchip: rk3036: use ARM arch timer instead of rk_timer Kever Yang
[U-Boot] [PATCH 6/8] rockchip: rk3288: use ARM arch timer instead of rk_timer Kever Yang
[U-Boot] [PATCH 7/8] rockchip: rk3128: use ARM arch timer instead of rk_timer Kever Yang
[U-Boot] [PATCH 8/8] rockchip: remove unused rk_timer.c Kever Yang
[U-Boot] [PATCH v2 1/2] rockchip: enable SYS_NS16550 for all SoCs by default Kever Yang
[U-Boot] [PATCH v2 2/2] rockchip: defconfig: remove CONFIG_SYS_NS16550 Kever Yang
[U-Boot] [PATCH 1/2] rockchip: rk3128: use ROCKCHIP_BOOT_MODE_REG to update reboot flag Kever Yang
[U-Boot] [PATCH 2/2] rockchip: rk322x: use ROCKCHIP_BOOT_MODE_REG to update reboot flag Kever Yang
[U-Boot] [PATCH 00/10] rockchip: enable board_debug_uart_init for all soc Kever Yang
[U-Boot] [PATCH 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default Kever Yang
[U-Boot] [PATCH 02/10] rockchip; kylin-rk3036: enabl DEBUG UART Kever Yang
[U-Boot] [PATCH 03/10] rockchip: rk3036: add board_debug_uart_init() Kever Yang
[U-Boot] [PATCH 04/10] rockchip: rk3188: add board_debug_uart_init() Kever Yang
[U-Boot] [PATCH 05/10] rockchip: rk322x: move board_debug_uart_init() to rk322x.c Kever Yang
[U-Boot] [PATCH 06/10] rockchip: rk3288: use grf structure to access soc_con2 Kever Yang
[U-Boot] [PATCH 07/10] rockchip: rk3288: add board_debug_uart_init() Kever Yang
[U-Boot] [PATCH 08/10] rockchip: rk3368: move board_debug_uart_init() to rk3368.c Kever Yang
[U-Boot] [PATCH 09/10] rockchip: rk3399: use grf structure to access reg Kever Yang
[U-Boot] [PATCH 10/10] rockchip: rk3399: add board_debug_uart_init() Kever Yang
[U-Boot] [PATCH v2 1/3] rockchip: rk3036: add ofdata_to_platdata() method for driver Kever Yang
[U-Boot] [PATCH v2 2/3] rockchip: rk3128: add ofdata_to_platdata() method for driver Kever Yang
[U-Boot] [PATCH v2 3/3] rockchip: rv1108: add ofdata_to_platdata() method for driver Kever Yang
[U-Boot] [U-Boot,2/3] rockchip: rk3188: add timer3 node Kever Yang
[U-Boot] [PATCH 0/8] Initial integration of AVB2.0 Kever Yang
[U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support Kever Yang
[U-Boot] [PATCH 2/2] config: evb-rk3399: enable make uboot.itb Kever Yang
[U-Boot] Issues with Rockchips make_fit_atf.py on master Kever Yang
[U-Boot] [PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Kever Yang
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Icenowy Zheng
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Icenowy Zheng
[U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot Icenowy Zheng
[U-Boot] [PATCH v5 0/6] fix apalis-tk1 pcie gigabit ethernet operation Marcel Ziswiler
[U-Boot] [PATCH v5 1/6] configs: apalis-tk1: fix boot failure using ext4 rootfs Marcel Ziswiler
[U-Boot] [PATCH v5 2/6] apalis-tk1: add missing as3722 gpio0 configuration Marcel Ziswiler
[U-Boot] [PATCH v5 3/6] power: as3722: fix ldo_get/set_enable for ldo index bigger than 7 Marcel Ziswiler
[U-Boot] [PATCH v5 4/6] pci: tegra: introduce weak tegra_pcie_board_port_reset() function Marcel Ziswiler
[U-Boot] [PATCH v5 5/6] power: as3722: add as3722_ldo_set_voltage signature to header file Marcel Ziswiler
[U-Boot] [PATCH v5 6/6] apalis-tk1: fix pcie reset for reliable gigabit ethernet operation Marcel Ziswiler
[U-Boot] [PATCH v3 0/3] fix apalis_t30 optional pcie operation Marcel Ziswiler
[U-Boot] [PATCH v3 1/3] apalis_t30: describe pcie ports Marcel Ziswiler
[U-Boot] [PATCH v3 2/3] apalis_t30: fix pcie port 0 and 1 pin muxing Marcel Ziswiler
[U-Boot] [PATCH v3 3/3] apalis_t30: fix optional pcie port reset for reliable pcie operation Marcel Ziswiler
[U-Boot] NDS32 toolchain? rick at andestech.com
[U-Boot] [PATCH v3 7/8] riscv: nx25: Enable distro boot rick at andestech.com
[U-Boot] NDS32 toolchain? rick at andestech.com
[U-Boot] [PATCH v2 0/3] This series adds support for gpio-leds "default-state" property. The linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v2 1/3] dm: led: Support "default-state" property linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v2 2/3] dm: led: auto probe() LEDs with "default-state" linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v2 3/3] dm: led: add testcase for "default-state" property linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v3 0/3] This series adds support for gpio-leds "default-state" property. The linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v3 1/3] dm: led: Support "default-state" property linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v3 2/3] dm: led: auto probe() LEDs with "default-state" linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v3 3/3] dm: led: add testcase for "default-state" property linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v4 0/3] This series adds support for gpio-leds "default-state" property. The linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v4 1/3] dm: led: Support "default-state" property linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v4 2/3] dm: led: auto probe() LEDs with "default-state" linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH v4 3/3] dm: led: add testcase for "default-state" property linux-kernel-dev at beckhoff.com
[U-Boot] [PATCH 0/3] Enable mmc to write sparse images jassisinghbrar at gmail.com
[U-Boot] [PATCH 1/3] fastboot: sparse: remove redundant argument to write_sparse_image jassisinghbrar at gmail.com
[U-Boot] [PATCH 2/3] fastboot: sparse: make write_sparse_image useable for non-fastboot jassisinghbrar at gmail.com
[U-Boot] [PATCH 3/3] mmc: support writing sparse images jassisinghbrar at gmail.com
[U-Boot] boot Hangs when Initrd size increases in FIT image gnix
[U-Boot] Uboot Hangs when Initrd size increased in FIT image gnix
[U-Boot] nand write isn't working with u-boot Mr. goldenstreet
[U-Boot] [PATCH v1 0/3] Stratix10 FPGA reconfiguration support chee.hong.ang at intel.com
[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver chee.hong.ang at intel.com
[U-Boot] [PATCH v1 2/3] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table chee.hong.ang at intel.com
[U-Boot] [PATCH v1 3/3] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration chee.hong.ang at intel.com
[U-Boot] Uboot Hangs when Initrd size increses josh phelps
[U-Boot] chiliSOM: USB bug sdrb
[U-Boot] chiliSOM: USB bug sdrb
[U-Boot] chiliSOM: USB bug sdrb
[U-Boot] chiliSOM: USB bug sdrb
[U-Boot] chiliSOM: USB bug sdrb
[U-Boot] [PATCH v10 0/3] Why netboot: DH at synoia.com
[U-Boot] [PATCH v10 1/3] Adding TCP and wget into u-boot DH at synoia.com
[U-Boot] [PATCH v10 2/3] Adding TCP DH at synoia.com
[U-Boot] [PATCH v10 3/3] Adding wget DH at synoia.com
[U-Boot] [PATCH v1] arm: mxs: make startup code thumb compatible klaus.goger at theobroma-systems.com
[U-Boot] [PATCH v2 1/2] arm: make arm926ejs startup code thumb compatible klaus.goger at theobroma-systems.com
[U-Boot] u-boot 2018 SPI SPL Mehmet Ali İPİN
[U-Boot] u-boot 2018 SPI SPL Mehmet Ali İPİN
[U-Boot] u-boot 2018 SPI SPL Mehmet Ali İPİN
[U-Boot] u-boot 2018 SPI SPL Mehmet Ali İPİN
[U-Boot] u-boot 2018 SPI SPL Mehmet Ali İPİN
[U-Boot] u-boot 2018 SPI SPL Mehmet Ali İPİN
[U-Boot] u-boot 2018 SPI SPL Mehmet Ali İPİN
[U-Boot] [PATCH v2 3/8] riscv: Add EFI application infrastructure 陳建志

Last message date: Mon Apr 30 23:44:50 UTC 2018
Archived on: Tue May 1 00:26:40 UTC 2018

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).