[U-Boot] [PATCH] ARM: uniphier: select a correct mmc device before flashing images

[Masahiro Yamada]

2018-04-20 18:38 GMT+09:00 Masahiro Yamada <yamada.masahiro at socionext.com>:
> Some boards support an SD card and an eMMC device at the same time.
> Since both belong to 'mmc', they are identified by a device number.
> When the device number of the eMMC is 1 instead 0, "mmc dev" command
> must be performed to switch the target device before flashing images.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> ---


Applied to u-boot-uniphier.





-- 
Best Regards
Masahiro Yamada