[U-Boot] [PATCH 10/10] rockchip: rk3399: add board_debug_uart_init()

[Kever Yang]

Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file for all rockchip SoCs later.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 arch/arm/mach-rockchip/rk3399-board-spl.c | 31 +------------------------------
 arch/arm/mach-rockchip/rk3399/rk3399.c    | 29 +++++++++++++++++++++++++++++
 2 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c
index d35990e..f88944f 100644
--- a/arch/arm/mach-rockchip/rk3399-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
@@ -80,34 +80,6 @@ void secure_timer_init(void)
 	writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
 }
 
-void board_debug_uart_init(void)
-{
-#define GRF_BASE	0xff770000
-	struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
-
-#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
-	/* Enable early UART0 on the RK3399 */
-	rk_clrsetreg(&grf->gpio2c_iomux,
-		     GRF_GPIO2C0_SEL_MASK,
-		     GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
-	rk_clrsetreg(&grf->gpio2c_iomux,
-		     GRF_GPIO2C1_SEL_MASK,
-		     GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
-#else
-	/* Enable early UART2 channel C on the RK3399 */
-	rk_clrsetreg(&grf->gpio4c_iomux,
-		     GRF_GPIO4C3_SEL_MASK,
-		     GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
-	rk_clrsetreg(&grf->gpio4c_iomux,
-		     GRF_GPIO4C4_SEL_MASK,
-		     GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
-	/* Set channel C as UART2 input */
-	rk_clrsetreg(&grf->soc_con7,
-		     GRF_UART_DBG_SEL_MASK,
-		     GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
-#endif
-}
-
 void board_init_f(ulong dummy)
 {
 	struct udevice *pinctrl;
@@ -116,8 +88,7 @@ void board_init_f(ulong dummy)
 	struct rk3399_grf_regs *grf;
 	int ret;
 
-#define EARLY_UART
-#ifdef EARLY_UART
+#ifdef CONFIG_DEBUG_UART
 	/*
 	 * Debug UART can be used from here if required:
 	 *
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index 6a276b9..7d64b72 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -58,3 +58,32 @@ int arch_cpu_init(void)
 
 	return 0;
 }
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
+
+#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
+	/* Enable early UART0 on the RK3399 */
+	rk_clrsetreg(&grf->gpio2c_iomux,
+		     GRF_GPIO2C0_SEL_MASK,
+		     GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio2c_iomux,
+		     GRF_GPIO2C1_SEL_MASK,
+		     GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
+#else
+	/* Enable early UART2 channel C on the RK3399 */
+	rk_clrsetreg(&grf->gpio4c_iomux,
+		     GRF_GPIO4C3_SEL_MASK,
+		     GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio4c_iomux,
+		     GRF_GPIO4C4_SEL_MASK,
+		     GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
+	/* Set channel C as UART2 input */
+	rk_clrsetreg(&grf->soc_con7,
+		     GRF_UART_DBG_SEL_MASK,
+		     GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
+#endif
+}
+#endif
-- 
1.9.1