[U-Boot] [PATCH v3] db410c: set clk node to be probed before relocation

[Ramon Fried]

The clock node is used by the serial driver and it's needed
before relocation.
This patch ensures that the msm-serial driver can actually
use the clock node.

Signed-off-by: Ramon Fried <ramon.fried at linaro.org>
---
v2: Moved the u-boot,dm-pre-reloc attribute to the -uboot.dtsi file
v3: Moved the forgotten u-boot,dm-pre-reloc also to -uboot.dtsi file

 arch/arm/dts/dragonboard410c-uboot.dtsi | 12 ++++++++++++
 arch/arm/dts/dragonboard410c.dts        |  1 -
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi
index c3475c4227..1de1419edc 100644
--- a/arch/arm/dts/dragonboard410c-uboot.dtsi
+++ b/arch/arm/dts/dragonboard410c-uboot.dtsi
@@ -10,6 +10,18 @@
 	config {
 		u-boot,mmc-env-partition = "boot";
 	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+
+	qcom,gcc at 1800000 {
+		u-boot,dm-pre-reloc;
+	};
+
+	serial at 78b0000 {
+		u-boot,dm-pre-reloc;
+		};
+	};
 };
 
 
diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
index 5ccfe7f8c8..aa9b0a138b 100644
--- a/arch/arm/dts/dragonboard410c.dts
+++ b/arch/arm/dts/dragonboard410c.dts
@@ -49,7 +49,6 @@
 		serial at 78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4";
 			reg = <0x78b0000 0x200>;
-			u-boot,dm-pre-reloc;
 			clock = <&clkc 4>;
 		};
 
-- 
2.14.1