[U-Boot] [PATCH v2 5/6] ARM: mvebu: a38x: restore support for setting timing
Chris Packham
judge.packham at gmail.com
Mon Apr 9 10:12:56 UTC 2018
This restores support for configuring the timing mode based on the
ddr_topology. This was originally implemented in commit 90bcc3d38d2b
("driver/ddr: Add support for setting timing in hws_topology_map") but
was removed as part of the upstream sync.
Signed-off-by: Chris Packham <judge.packham at gmail.com>
---
Changes in v2: New
board/CZ.NIC/turris_omnia/turris_omnia.c | 6 ++++--
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 3 ++-
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 3 ++-
board/gdsys/a38x/controlcenterdc.c | 3 ++-
board/solidrun/clearfog/clearfog.c | 3 ++-
drivers/ddr/marvell/a38x/ddr3_training.c | 8 ++++++++
drivers/ddr/marvell/a38x/ddr_topology_def.h | 3 +++
drivers/ddr/marvell/a38x/mv_ddr_plat.c | 5 -----
drivers/ddr/marvell/a38x/mv_ddr_topology.h | 6 ++++++
9 files changed, 29 insertions(+), 11 deletions(-)
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index 9477a802acde..3535e30e3ed9 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -214,7 +214,8 @@ static struct mv_ddr_topology_map board_topology_map_1g = {
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
- MV_DDR_TEMP_NORMAL} }, /* temperature */
+ MV_DDR_TEMP_NORMAL, /* temperature */
+ MV_DDR_TIM_2T} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
@@ -235,7 +236,8 @@ static struct mv_ddr_topology_map board_topology_map_2g = {
MV_DDR_DIE_CAP_8GBIT, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
- MV_DDR_TEMP_NORMAL} }, /* temperature */
+ MV_DDR_TEMP_NORMAL, /* temperature */
+ MV_DDR_TIM_2T} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
diff --git a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
index 2a092cb80418..aeb617172163 100644
--- a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
+++ b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
@@ -70,7 +70,8 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_DIE_CAP_2GBIT, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
- MV_DDR_TEMP_LOW} }, /* temperature */
+ MV_DDR_TEMP_LOW, /* temperature */
+ MV_DDR_TIM_DEFAULT} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
index e3b6f2d8a7e6..073b5388080a 100644
--- a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
+++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
@@ -91,7 +91,8 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
- MV_DDR_TEMP_LOW} }, /* temperature */
+ MV_DDR_TEMP_LOW, /* temperature */
+ MV_DDR_TIM_DEFAULT} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
diff --git a/board/gdsys/a38x/controlcenterdc.c b/board/gdsys/a38x/controlcenterdc.c
index 1b3b881c3996..0ad6825f3057 100644
--- a/board/gdsys/a38x/controlcenterdc.c
+++ b/board/gdsys/a38x/controlcenterdc.c
@@ -54,7 +54,8 @@ static struct mv_ddr_topology_map ddr_topology_map = {
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
DDR_FREQ_533, /* frequency */
0, 0, /* cas_wl cas_l */
- MV_DDR_TEMP_LOW} }, /* temperature */
+ MV_DDR_TEMP_LOW, /* temperature */
+ MV_DDR_TIM_DEFAULT} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
index 75eb59ae3ee3..901a558a90ac 100644
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -84,7 +84,8 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
- MV_DDR_TEMP_LOW} }, /* temperature */
+ MV_DDR_TEMP_LOW, /* temperature */
+ MV_DDR_TIM_DEFAULT} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
{ {0} }, /* raw spd data */
diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c
index 0b414aba1fda..f65ff4db4ceb 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training.c
@@ -366,6 +366,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_
u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE);
struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
enum hws_ddr_freq freq = tm->interface_params[0].memory_freq;
+ enum mv_ddr_timing timing;
DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE,
("Init_controller, do_mrs_phy=%d, is_ctrl64_bit=%d\n",
@@ -604,8 +605,12 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_
DUNIT_CTRL_HIGH_REG,
(init_cntr_prm->msys_init << 7), (1 << 7)));
+ timing = tm->interface_params[if_id].timing;
+
if (mode_2t != 0xff) {
t2t = mode_2t;
+ } else if (timing != MV_DDR_TIM_DEFAULT) {
+ t2t = (timing == MV_DDR_TIM_2T) ? 1 : 0;
} else {
/* calculate number of CS (per interface) */
CHECK_STATUS(calc_cs_num
@@ -1269,6 +1274,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type,
u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE);
struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
unsigned int tclk;
+ enum mv_ddr_timing timing = tm->interface_params[if_id].timing;
DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE,
("dev %d access %d IF %d freq %d\n", dev_num,
@@ -1411,6 +1417,8 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type,
/* Calculate 2T mode */
if (mode_2t != 0xff) {
t2t = mode_2t;
+ } else if (timing != MV_DDR_TIM_DEFAULT) {
+ t2t = (timing == MV_DDR_TIM_2T) ? 1 : 0;
} else {
/* Calculate number of CS per interface */
CHECK_STATUS(calc_cs_num(dev_num, if_id, &cs_num));
diff --git a/drivers/ddr/marvell/a38x/ddr_topology_def.h b/drivers/ddr/marvell/a38x/ddr_topology_def.h
index 8fd0361dfbd4..b7f09fc53a75 100644
--- a/drivers/ddr/marvell/a38x/ddr_topology_def.h
+++ b/drivers/ddr/marvell/a38x/ddr_topology_def.h
@@ -65,6 +65,9 @@ struct if_params {
/* operation temperature */
enum mv_ddr_temperature interface_temp;
+
+ /* 2T vs 1T mode (by default computed from number of CSs) */
+ enum mv_ddr_timing timing;
};
struct mv_ddr_topology_map {
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
index 058e262a61ad..1ab72e36189e 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c
+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
@@ -675,11 +675,6 @@ static int mv_ddr_sw_db_init(u32 dev_num, u32 board_id)
dfs_low_freq = DFS_LOW_FREQ_VALUE;
calibration_update_control = 1;
-#ifdef CONFIG_ARMADA_38X
- /* For a38x only, change to 2T mode to resolve low freq instability */
- mode_2t = 1;
-#endif
-
ddr3_tip_a38x_get_medium_freq(dev_num, &medium_freq);
return MV_OK;
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_topology.h b/drivers/ddr/marvell/a38x/mv_ddr_topology.h
index 9fd5019ff235..3d801d4f382a 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_topology.h
+++ b/drivers/ddr/marvell/a38x/mv_ddr_topology.h
@@ -37,6 +37,12 @@ enum mv_ddr_temperature {
MV_DDR_TEMP_HIGH
};
+enum mv_ddr_timing {
+ MV_DDR_TIM_DEFAULT,
+ MV_DDR_TIM_1T,
+ MV_DDR_TIM_2T
+};
+
enum mv_ddr_timing_data {
MV_DDR_TCK_AVG_MIN, /* sdram min cycle time (t ck avg min) */
MV_DDR_TAA_MIN, /* min cas latency time (t aa min) */
--
2.16.2
More information about the U-Boot
mailing list