[U-Boot] [PATCH] watchdog: cadence: Show used timeout value

[Michal Simek]

Debug message was showing timeout value which was passed to start
function but there is a checking if this value can be setup.
The patch is moving this debug printf function below checking.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/watchdog/cdns_wdt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/cdns_wdt.c b/drivers/watchdog/cdns_wdt.c
index c43f7e8096ca..25cb34c493d2 100644
--- a/drivers/watchdog/cdns_wdt.c
+++ b/drivers/watchdog/cdns_wdt.c
@@ -143,13 +143,13 @@ static int cdns_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
 		return -1;
 	}
 
-	debug("%s: CLK_FREQ %ld, timeout %lld\n", __func__, clk_f, timeout);
-
 	if ((timeout < CDNS_WDT_MIN_TIMEOUT) ||
 	    (timeout > CDNS_WDT_MAX_TIMEOUT)) {
 		timeout = priv->timeout;
 	}
 
+	debug("%s: CLK_FREQ %ld, timeout %lld\n", __func__, clk_f, timeout);
+
 	if (clk_f <= CDNS_WDT_CLK_75MHZ) {
 		prescaler = CDNS_WDT_PRESCALE_512;
 		ctrl_clksel = CDNS_WDT_PRESCALE_SELECT_512;
-- 
2.17.0