[U-Boot] [PATCH 0/6] reset: add reset driver for SoCFPGA
Marek Vasut
marex at denx.de
Wed Apr 4 22:58:23 UTC 2018
On 04/05/2018 12:18 AM, Dinh Nguyen wrote:
> Hi,
>
> This patchset does the following for the SoCFPGA platform:
>
> - Adds a DM reset manager driver
> - Make the SoCFPGA platform use the DM I2C driver
> - Adds i2c aliases and enable i2c for de0_nano_soc platform
> - Adds a reset manager call to the i2c designware driver to look up
> any reset properties in the i2c dts node, and deassert the reset the
> IP if found.
> - Adds CONFIG_DM_RESET to all the SoCFPGA defconfigs
>
> For this patchset, I'm only enabling the i2c in the DTS for the Terasic
> DE-0 Atlas board. I'll look to enable the other boards in the near future.
>
> Dinh
>
> Dinh Nguyen (6):
> reset: socfpga: add reset driver for SoCFPGA platform
> configs: socfpga: convert i2c to dm
> arm: dts: socfpga: enables i2c0 in socfpga_de0_nano
> arm: dts: socfpga: add reset property
> i2c: designware: add reset ctrl to driver
> configs: socfpga: add DM_RESET
>
> arch/arm/dts/socfpga.dtsi | 12 +++
> arch/arm/dts/socfpga_cyclone5_de0_nano_soc.dts | 12 +++
> configs/socfpga_arria5_defconfig | 2 +
> configs/socfpga_cyclone5_defconfig | 2 +
> configs/socfpga_dbm_soc1_defconfig | 2 +
> configs/socfpga_de0_nano_soc_defconfig | 2 +
> configs/socfpga_de10_nano_defconfig | 2 +
> configs/socfpga_de1_soc_defconfig | 2 +
> configs/socfpga_is1_defconfig | 2 +
> configs/socfpga_mcvevk_defconfig | 2 +
> configs/socfpga_sockit_defconfig | 2 +
> configs/socfpga_socrates_defconfig | 2 +
> configs/socfpga_sr1500_defconfig | 2 +
> configs/socfpga_vining_fpga_defconfig | 1 +
> drivers/i2c/designware_i2c.c | 10 +++
> drivers/reset/Kconfig | 7 ++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-socfpga.c | 105 +++++++++++++++++++++++++
> include/configs/socfpga_common.h | 2 +
> 19 files changed, 172 insertions(+)
> create mode 100644 drivers/reset/reset-socfpga.c
>
Series looks OK to me , except for that one minor nit in 1/6.
I'd like AB/RB from Heiko, otherwise I'll just pull it in.
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list