[U-Boot] [PATCH v2 u-boot] ARM: meson: rename GXBB to GX
Neil Armstrong
narmstrong at baylibre.com
Wed Apr 11 15:13:45 UTC 2018
Taking into account the Amlogic Family name starts with GX, including
the GXBB, GXL and GXM SoCs.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
Changes since v1:
- Resent as single patch since cpuinfo needs further work
- Aligned the defines in gx.h
arch/arm/include/asm/arch-meson/gx.h | 70 +++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-meson/gxbb.h | 70 -------------------------------
arch/arm/mach-meson/board.c | 28 ++++++-------
arch/arm/mach-meson/eth.c | 24 +++++------
arch/arm/mach-meson/sm.c | 2 +-
board/amlogic/khadas-vim/khadas-vim.c | 2 +-
board/amlogic/libretech-cc/libretech-cc.c | 6 +--
board/amlogic/odroid-c2/odroid-c2.c | 10 ++---
board/amlogic/p212/p212.c | 2 +-
include/configs/khadas-vim.h | 2 +-
include/configs/libretech-cc.h | 2 +-
include/configs/meson-gx-common.h | 47 +++++++++++++++++++++
include/configs/meson-gxbb-common.h | 47 ---------------------
include/configs/odroid-c2.h | 2 +-
include/configs/p212.h | 2 +-
15 files changed, 158 insertions(+), 158 deletions(-)
create mode 100644 arch/arm/include/asm/arch-meson/gx.h
delete mode 100644 arch/arm/include/asm/arch-meson/gxbb.h
create mode 100644 include/configs/meson-gx-common.h
delete mode 100644 include/configs/meson-gxbb-common.h
diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h
new file mode 100644
index 0000000..2b311cd
--- /dev/null
+++ b/arch/arm/include/asm/arch-meson/gx.h
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2016 - Beniamino Galvani <b.galvani at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GX_H__
+#define __GX_H__
+
+#define GX_FIRMWARE_MEM_SIZE 0x1000000
+
+#define GX_AOBUS_BASE 0xc8100000
+#define GX_PERIPHS_BASE 0xc8834400
+#define GX_HIU_BASE 0xc883c000
+#define GX_ETH_BASE 0xc9410000
+
+/* Always-On Peripherals registers */
+#define GX_AO_ADDR(off) (GX_AOBUS_BASE + ((off) << 2))
+
+#define GX_AO_SEC_GP_CFG0 GX_AO_ADDR(0x90)
+#define GX_AO_SEC_GP_CFG3 GX_AO_ADDR(0x93)
+#define GX_AO_SEC_GP_CFG4 GX_AO_ADDR(0x94)
+#define GX_AO_SEC_GP_CFG5 GX_AO_ADDR(0x95)
+
+#define GX_AO_MEM_SIZE_MASK 0xFFFF0000
+#define GX_AO_MEM_SIZE_SHIFT 16
+#define GX_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000
+#define GX_AO_BL31_RSVMEM_SIZE_SHIFT 16
+#define GX_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
+
+/* Peripherals registers */
+#define GX_PERIPHS_ADDR(off) (GX_PERIPHS_BASE + ((off) << 2))
+
+/* GPIO registers 0 to 6 */
+#define _GX_GPIO_OFF(n) ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
+#define GX_GPIO_EN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 0)
+#define GX_GPIO_IN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
+#define GX_GPIO_OUT(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
+
+#define GX_ETH_REG_0 GX_PERIPHS_ADDR(0x50)
+#define GX_ETH_REG_1 GX_PERIPHS_ADDR(0x51)
+#define GX_ETH_REG_2 GX_PERIPHS_ADDR(0x56)
+#define GX_ETH_REG_3 GX_PERIPHS_ADDR(0x57)
+
+#define GX_ETH_REG_0_PHY_INTF BIT(0)
+#define GX_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
+#define GX_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
+#define GX_ETH_REG_0_PHY_CLK_EN BIT(10)
+#define GX_ETH_REG_0_INVERT_RMII_CLK BIT(11)
+#define GX_ETH_REG_0_CLK_EN BIT(12)
+
+/* HIU registers */
+#define GX_HIU_ADDR(off) (GX_HIU_BASE + ((off) << 2))
+
+#define GX_MEM_PD_REG_0 GX_HIU_ADDR(0x40)
+
+/* Ethernet memory power domain */
+#define GX_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
+
+/* Clock gates */
+#define GX_GCLK_MPEG_0 GX_HIU_ADDR(0x50)
+#define GX_GCLK_MPEG_1 GX_HIU_ADDR(0x51)
+#define GX_GCLK_MPEG_2 GX_HIU_ADDR(0x52)
+#define GX_GCLK_MPEG_OTHER GX_HIU_ADDR(0x53)
+#define GX_GCLK_MPEG_AO GX_HIU_ADDR(0x54)
+
+#define GX_GCLK_MPEG_0_I2C BIT(9)
+#define GX_GCLK_MPEG_1_ETH BIT(3)
+
+#endif /* __GX_H__ */
diff --git a/arch/arm/include/asm/arch-meson/gxbb.h b/arch/arm/include/asm/arch-meson/gxbb.h
deleted file mode 100644
index ef63dea..0000000
--- a/arch/arm/include/asm/arch-meson/gxbb.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2016 - Beniamino Galvani <b.galvani at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __GXBB_H__
-#define __GXBB_H__
-
-#define GXBB_FIRMWARE_MEM_SIZE 0x1000000
-
-#define GXBB_AOBUS_BASE 0xc8100000
-#define GXBB_PERIPHS_BASE 0xc8834400
-#define GXBB_HIU_BASE 0xc883c000
-#define GXBB_ETH_BASE 0xc9410000
-
-/* Always-On Peripherals registers */
-#define GXBB_AO_ADDR(off) (GXBB_AOBUS_BASE + ((off) << 2))
-
-#define GXBB_AO_SEC_GP_CFG0 GXBB_AO_ADDR(0x90)
-#define GXBB_AO_SEC_GP_CFG3 GXBB_AO_ADDR(0x93)
-#define GXBB_AO_SEC_GP_CFG4 GXBB_AO_ADDR(0x94)
-#define GXBB_AO_SEC_GP_CFG5 GXBB_AO_ADDR(0x95)
-
-#define GXBB_AO_MEM_SIZE_MASK 0xFFFF0000
-#define GXBB_AO_MEM_SIZE_SHIFT 16
-#define GXBB_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000
-#define GXBB_AO_BL31_RSVMEM_SIZE_SHIFT 16
-#define GXBB_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
-
-/* Peripherals registers */
-#define GXBB_PERIPHS_ADDR(off) (GXBB_PERIPHS_BASE + ((off) << 2))
-
-/* GPIO registers 0 to 6 */
-#define _GXBB_GPIO_OFF(n) ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
-#define GXBB_GPIO_EN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 0)
-#define GXBB_GPIO_IN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 1)
-#define GXBB_GPIO_OUT(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 2)
-
-#define GXBB_ETH_REG_0 GXBB_PERIPHS_ADDR(0x50)
-#define GXBB_ETH_REG_1 GXBB_PERIPHS_ADDR(0x51)
-#define GXBB_ETH_REG_2 GXBB_PERIPHS_ADDR(0x56)
-#define GXBB_ETH_REG_3 GXBB_PERIPHS_ADDR(0x57)
-
-#define GXBB_ETH_REG_0_PHY_INTF BIT(0)
-#define GXBB_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
-#define GXBB_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
-#define GXBB_ETH_REG_0_PHY_CLK_EN BIT(10)
-#define GXBB_ETH_REG_0_INVERT_RMII_CLK BIT(11)
-#define GXBB_ETH_REG_0_CLK_EN BIT(12)
-
-/* HIU registers */
-#define GXBB_HIU_ADDR(off) (GXBB_HIU_BASE + ((off) << 2))
-
-#define GXBB_MEM_PD_REG_0 GXBB_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define GXBB_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
-
-/* Clock gates */
-#define GXBB_GCLK_MPEG_0 GXBB_HIU_ADDR(0x50)
-#define GXBB_GCLK_MPEG_1 GXBB_HIU_ADDR(0x51)
-#define GXBB_GCLK_MPEG_2 GXBB_HIU_ADDR(0x52)
-#define GXBB_GCLK_MPEG_OTHER GXBB_HIU_ADDR(0x53)
-#define GXBB_GCLK_MPEG_AO GXBB_HIU_ADDR(0x54)
-
-#define GXBB_GCLK_MPEG_0_I2C BIT(9)
-#define GXBB_GCLK_MPEG_1_ETH BIT(3)
-
-#endif /* __GXBB_H__ */
diff --git a/arch/arm/mach-meson/board.c b/arch/arm/mach-meson/board.c
index b6d3a17..0693d9d 100644
--- a/arch/arm/mach-meson/board.c
+++ b/arch/arm/mach-meson/board.c
@@ -7,7 +7,7 @@
#include <common.h>
#include <linux/libfdt.h>
#include <linux/err.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
#include <asm/arch/sm.h>
#include <asm/armv8/mmu.h>
#include <asm/unaligned.h>
@@ -40,8 +40,8 @@ int dram_init(void)
phys_size_t get_effective_memsize(void)
{
/* Size is reported in MiB, convert it in bytes */
- return ((readl(GXBB_AO_SEC_GP_CFG0) & GXBB_AO_MEM_SIZE_MASK)
- >> GXBB_AO_MEM_SIZE_SHIFT) * SZ_1M;
+ return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
+ >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
}
static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
@@ -72,27 +72,27 @@ void meson_gx_init_reserved_memory(void *fdt)
* - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
*/
- reg = readl(GXBB_AO_SEC_GP_CFG3);
+ reg = readl(GX_AO_SEC_GP_CFG3);
- bl31_size = ((reg & GXBB_AO_BL31_RSVMEM_SIZE_MASK)
- >> GXBB_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
- bl32_size = (reg & GXBB_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+ bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
+ >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+ bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
- bl31_start = readl(GXBB_AO_SEC_GP_CFG5);
- bl32_start = readl(GXBB_AO_SEC_GP_CFG4);
+ bl31_start = readl(GX_AO_SEC_GP_CFG5);
+ bl32_start = readl(GX_AO_SEC_GP_CFG4);
/*
- * Early Meson GXBB Firmware revisions did not provide the reserved
+ * Early Meson GX Firmware revisions did not provide the reserved
* memory zones in the registers, keep fixed memory zone handling.
*/
- if (IS_ENABLED(CONFIG_MESON_GXBB) &&
+ if (IS_ENABLED(CONFIG_MESON_GX) &&
!reg && !bl31_start && !bl32_start) {
bl31_start = 0x10000000;
bl31_size = 0x200000;
}
/* Add first 16MiB reserved zone */
- meson_board_add_reserved_memory(fdt, 0, GXBB_FIRMWARE_MEM_SIZE);
+ meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
/* Add BL31 reserved zone */
if (bl31_start && bl31_size)
@@ -108,7 +108,7 @@ void reset_cpu(ulong addr)
psci_system_reset();
}
-static struct mm_region gxbb_mem_map[] = {
+static struct mm_region gx_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
@@ -128,4 +128,4 @@ static struct mm_region gxbb_mem_map[] = {
}
};
-struct mm_region *mem_map = gxbb_mem_map;
+struct mm_region *mem_map = gx_mem_map;
diff --git a/arch/arm/mach-meson/eth.c b/arch/arm/mach-meson/eth.c
index 8c6577b..8050bfa 100644
--- a/arch/arm/mach-meson/eth.c
+++ b/arch/arm/mach-meson/eth.c
@@ -8,7 +8,7 @@
#include <common.h>
#include <dm.h>
#include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
#include <asm/arch/eth.h>
#include <phy.h>
@@ -23,23 +23,23 @@ void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* Set RGMII mode */
- setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
- GXBB_ETH_REG_0_TX_PHASE(1) |
- GXBB_ETH_REG_0_TX_RATIO(4) |
- GXBB_ETH_REG_0_PHY_CLK_EN |
- GXBB_ETH_REG_0_CLK_EN);
+ setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
+ GX_ETH_REG_0_TX_PHASE(1) |
+ GX_ETH_REG_0_TX_RATIO(4) |
+ GX_ETH_REG_0_PHY_CLK_EN |
+ GX_ETH_REG_0_CLK_EN);
break;
case PHY_INTERFACE_MODE_RMII:
/* Set RMII mode */
- out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
- GXBB_ETH_REG_0_CLK_EN);
+ out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
+ GX_ETH_REG_0_CLK_EN);
/* Use GXL RMII Internal PHY */
if (IS_ENABLED(CONFIG_MESON_GXL) &&
(flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) {
- writel(0x10110181, GXBB_ETH_REG_2);
- writel(0xe40908ff, GXBB_ETH_REG_3);
+ writel(0x10110181, GX_ETH_REG_2);
+ writel(0xe40908ff, GX_ETH_REG_3);
}
break;
@@ -50,6 +50,6 @@ void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
}
/* Enable power and clock gate */
- setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
- clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+ setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
+ clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
}
diff --git a/arch/arm/mach-meson/sm.c b/arch/arm/mach-meson/sm.c
index 1b35a22..b374031 100644
--- a/arch/arm/mach-meson/sm.c
+++ b/arch/arm/mach-meson/sm.c
@@ -7,7 +7,7 @@
*/
#include <common.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
#include <linux/kernel.h>
#define FN_GET_SHARE_MEM_INPUT_BASE 0x82000020
diff --git a/board/amlogic/khadas-vim/khadas-vim.c b/board/amlogic/khadas-vim/khadas-vim.c
index 83b1b6e..c23ddab 100644
--- a/board/amlogic/khadas-vim/khadas-vim.c
+++ b/board/amlogic/khadas-vim/khadas-vim.c
@@ -9,7 +9,7 @@
#include <dm.h>
#include <environment.h>
#include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
#include <asm/arch/mem.h>
#include <asm/arch/sm.h>
#include <asm/arch/eth.h>
diff --git a/board/amlogic/libretech-cc/libretech-cc.c b/board/amlogic/libretech-cc/libretech-cc.c
index 5795340..36fda46 100644
--- a/board/amlogic/libretech-cc/libretech-cc.c
+++ b/board/amlogic/libretech-cc/libretech-cc.c
@@ -9,7 +9,7 @@
#include <dm.h>
#include <environment.h>
#include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
#include <asm/arch/sm.h>
#include <asm/arch/eth.h>
#include <asm/arch/mem.h>
@@ -34,8 +34,8 @@ int misc_init_r(void)
MESON_GXL_USE_INTERNAL_RMII_PHY);
/* Enable power and clock gate */
- setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
- clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+ setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
+ clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c
index 8645f22..0ec0771 100644
--- a/board/amlogic/odroid-c2/odroid-c2.c
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@ -8,7 +8,7 @@
#include <dm.h>
#include <environment.h>
#include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
#include <asm/arch/sm.h>
#include <asm/arch/eth.h>
#include <asm/arch/mem.h>
@@ -32,13 +32,13 @@ int misc_init_r(void)
meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
/* Enable power and clock gate */
- setbits_le32(GXBB_GCLK_MPEG_0, GXBB_GCLK_MPEG_0_I2C);
+ setbits_le32(GX_GCLK_MPEG_0, GX_GCLK_MPEG_0_I2C);
/* Reset PHY on GPIOZ_14 */
- clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
- clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+ clrbits_le32(GX_GPIO_EN(3), BIT(14));
+ clrbits_le32(GX_GPIO_OUT(3), BIT(14));
mdelay(10);
- setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+ setbits_le32(GX_GPIO_OUT(3), BIT(14));
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c
index 7c0abbc..10f6b23 100644
--- a/board/amlogic/p212/p212.c
+++ b/board/amlogic/p212/p212.c
@@ -9,7 +9,7 @@
#include <dm.h>
#include <environment.h>
#include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
#include <asm/arch/sm.h>
#include <asm/arch/eth.h>
#include <asm/arch/mem.h>
diff --git a/include/configs/khadas-vim.h b/include/configs/khadas-vim.h
index f44b388..8f14208 100644
--- a/include/configs/khadas-vim.h
+++ b/include/configs/khadas-vim.h
@@ -14,6 +14,6 @@
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-khadas-vim.dtb\0"
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
#endif /* __CONFIG_H */
diff --git a/include/configs/libretech-cc.h b/include/configs/libretech-cc.h
index 08dfb30..897a697 100644
--- a/include/configs/libretech-cc.h
+++ b/include/configs/libretech-cc.h
@@ -14,6 +14,6 @@
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb\0"
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
#endif /* __CONFIG_H */
diff --git a/include/configs/meson-gx-common.h b/include/configs/meson-gx-common.h
new file mode 100644
index 0000000..1131643
--- /dev/null
+++ b/include/configs/meson-gx-common.h
@@ -0,0 +1,47 @@
+/*
+ * Configuration for Amlogic Meson GX SoCs
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MESON_GX_COMMON_CONFIG_H
+#define __MESON_GX_COMMON_CONFIG_H
+
+#define CONFIG_CPU_ARMV8
+#define CONFIG_REMAKE_ELF
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0xc4301000
+#define GICC_BASE 0xc4302000
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 2) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr_r=0x01000000\0" \
+ "scriptaddr=0x1f000000\0" \
+ "kernel_addr_r=0x01080000\0" \
+ "pxefile_addr_r=0x01080000\0" \
+ "ramdisk_addr_r=0x13000000\0" \
+ MESON_FDTFILE_SETTING \
+ BOOTENV
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */
+
+#endif /* __MESON_GX_COMMON_CONFIG_H */
diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h
deleted file mode 100644
index 5794bc0..0000000
--- a/include/configs/meson-gxbb-common.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Configuration for Amlogic Meson GXBB SoCs
- * (C) Copyright 2016 Beniamino Galvani <b.galvani at gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __MESON_GXBB_COMMON_CONFIG_H
-#define __MESON_GXBB_COMMON_CONFIG_H
-
-#define CONFIG_CPU_ARMV8
-#define CONFIG_REMAKE_ELF
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_SYS_MAXARGS 32
-#define CONFIG_SYS_MALLOC_LEN (32 << 20)
-#define CONFIG_SYS_CBSIZE 1024
-
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
-
-/* Generic Interrupt Controller Definitions */
-#define GICD_BASE 0xc4301000
-#define GICC_BASE 0xc4302000
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 2) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_addr_r=0x01000000\0" \
- "scriptaddr=0x1f000000\0" \
- "kernel_addr_r=0x01080000\0" \
- "pxefile_addr_r=0x01080000\0" \
- "ramdisk_addr_r=0x13000000\0" \
- MESON_FDTFILE_SETTING \
- BOOTENV
-
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */
-
-#endif /* __MESON_GXBB_COMMON_CONFIG_H */
diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h
index ff30a8a..d9914af 100644
--- a/include/configs/odroid-c2.h
+++ b/include/configs/odroid-c2.h
@@ -14,6 +14,6 @@
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-odroidc2.dtb\0"
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
#endif /* __CONFIG_H */
diff --git a/include/configs/p212.h b/include/configs/p212.h
index a087d86..a950da3 100644
--- a/include/configs/p212.h
+++ b/include/configs/p212.h
@@ -16,6 +16,6 @@
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-p212.dtb\0"
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
#endif /* __CONFIG_H */
--
2.7.4
More information about the U-Boot
mailing list