[U-Boot] [PATCH v2 u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers
Neil Armstrong
narmstrong at baylibre.com
Wed Apr 11 14:29:07 UTC 2018
The Amlogic Meson GXL and GXM (simple variant) embeds up to 3 USB2 PHYs
and an USB3 PHY. This patch adds drivers for these for the standard generic
PHY interface and supports the power-on/off calls and set the Host mode by
default.
They are based on the excellent work from Martin Blumenstingl merged in linux.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/phy/Kconfig | 8 ++
drivers/phy/Makefile | 1 +
drivers/phy/meson-gxl-usb2.c | 238 +++++++++++++++++++++++++++++++++++++++++++
drivers/phy/meson-gxl-usb3.c | 201 ++++++++++++++++++++++++++++++++++++
4 files changed, 448 insertions(+)
create mode 100644 drivers/phy/meson-gxl-usb2.c
create mode 100644 drivers/phy/meson-gxl-usb3.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 3b9a09c..99a6d95 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -85,4 +85,12 @@ config STI_USB_PHY
used by USB2 and USB3 Host controllers available on
STiH407 SoC families.
+config MESON_GXL_USB_PHY
+ bool "Amlogic Meson GXL USB PHYs"
+ depends on PHY && ARCH_MESON && MESON_GXL
+ imply REGMAP
+ help
+ This is the generic phy driver for the Amlogic Meson GXL
+ USB2 and USB3 PHYS.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 668040b..6c1610e 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
+obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o meson-gxl-usb3.o
diff --git a/drivers/phy/meson-gxl-usb2.c b/drivers/phy/meson-gxl-usb2.c
new file mode 100644
index 0000000..15c9c89
--- /dev/null
+++ b/drivers/phy/meson-gxl-usb2.c
@@ -0,0 +1,238 @@
+/*
+ * Meson GXL and GXM USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstron at baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <bitfield.h>
+#include <dm.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <power/regulator.h>
+#include <clk.h>
+
+#include <linux/bitops.h>
+#include <linux/compat.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* bits [31:27] are read-only */
+#define U2P_R0 0x0
+ #define U2P_R0_BYPASS_SEL BIT(0)
+ #define U2P_R0_BYPASS_DM_EN BIT(1)
+ #define U2P_R0_BYPASS_DP_EN BIT(2)
+ #define U2P_R0_TXBITSTUFF_ENH BIT(3)
+ #define U2P_R0_TXBITSTUFF_EN BIT(4)
+ #define U2P_R0_DM_PULLDOWN BIT(5)
+ #define U2P_R0_DP_PULLDOWN BIT(6)
+ #define U2P_R0_DP_VBUS_VLD_EXT_SEL BIT(7)
+ #define U2P_R0_DP_VBUS_VLD_EXT BIT(8)
+ #define U2P_R0_ADP_PRB_EN BIT(9)
+ #define U2P_R0_ADP_DISCHARGE BIT(10)
+ #define U2P_R0_ADP_CHARGE BIT(11)
+ #define U2P_R0_DRV_VBUS BIT(12)
+ #define U2P_R0_ID_PULLUP BIT(13)
+ #define U2P_R0_LOOPBACK_EN_B BIT(14)
+ #define U2P_R0_OTG_DISABLE BIT(15)
+ #define U2P_R0_COMMON_ONN BIT(16)
+ #define U2P_R0_FSEL_MASK GENMASK(19, 17)
+ #define U2P_R0_REF_CLK_SEL_MASK GENMASK(21, 20)
+ #define U2P_R0_POWER_ON_RESET BIT(22)
+ #define U2P_R0_V_ATE_TEST_EN_B_MASK GENMASK(24, 23)
+ #define U2P_R0_ID_SET_ID_DQ BIT(25)
+ #define U2P_R0_ATE_RESET BIT(26)
+ #define U2P_R0_FSV_MINUS BIT(27)
+ #define U2P_R0_FSV_PLUS BIT(28)
+ #define U2P_R0_BYPASS_DM_DATA BIT(29)
+ #define U2P_R0_BYPASS_DP_DATA BIT(30)
+
+#define U2P_R1 0x4
+ #define U2P_R1_BURN_IN_TEST BIT(0)
+ #define U2P_R1_ACA_ENABLE BIT(1)
+ #define U2P_R1_DCD_ENABLE BIT(2)
+ #define U2P_R1_VDAT_SRC_EN_B BIT(3)
+ #define U2P_R1_VDAT_DET_EN_B BIT(4)
+ #define U2P_R1_CHARGES_SEL BIT(5)
+ #define U2P_R1_TX_PREEMP_PULSE_TUNE BIT(6)
+ #define U2P_R1_TX_PREEMP_AMP_TUNE_MASK GENMASK(8, 7)
+ #define U2P_R1_TX_RES_TUNE_MASK GENMASK(10, 9)
+ #define U2P_R1_TX_RISE_TUNE_MASK GENMASK(12, 11)
+ #define U2P_R1_TX_VREF_TUNE_MASK GENMASK(16, 13)
+ #define U2P_R1_TX_FSLS_TUNE_MASK GENMASK(20, 17)
+ #define U2P_R1_TX_HSXV_TUNE_MASK GENMASK(22, 21)
+ #define U2P_R1_OTG_TUNE_MASK GENMASK(25, 23)
+ #define U2P_R1_SQRX_TUNE_MASK GENMASK(28, 26)
+ #define U2P_R1_COMP_DIS_TUNE_MASK GENMASK(31, 29)
+
+/* bits [31:14] are read-only */
+#define U2P_R2 0x8
+ #define U2P_R2_TESTDATA_IN_MASK GENMASK(7, 0)
+ #define U2P_R2_TESTADDR_MASK GENMASK(11, 8)
+ #define U2P_R2_TESTDATA_OUT_SEL BIT(12)
+ #define U2P_R2_TESTCLK BIT(13)
+ #define U2P_R2_TESTDATA_OUT_MASK GENMASK(17, 14)
+ #define U2P_R2_ACA_PIN_RANGE_C BIT(18)
+ #define U2P_R2_ACA_PIN_RANGE_B BIT(19)
+ #define U2P_R2_ACA_PIN_RANGE_A BIT(20)
+ #define U2P_R2_ACA_PIN_GND BIT(21)
+ #define U2P_R2_ACA_PIN_FLOAT BIT(22)
+ #define U2P_R2_CHARGE_DETECT BIT(23)
+ #define U2P_R2_DEVICE_SESSION_VALID BIT(24)
+ #define U2P_R2_ADP_PROBE BIT(25)
+ #define U2P_R2_ADP_SENSE BIT(26)
+ #define U2P_R2_SESSION_END BIT(27)
+ #define U2P_R2_VBUS_VALID BIT(28)
+ #define U2P_R2_B_VALID BIT(29)
+ #define U2P_R2_A_VALID BIT(30)
+ #define U2P_R2_ID_DIG BIT(31)
+
+#define U2P_R3 0xc
+
+#define RESET_COMPLETE_TIME 500
+
+struct phy_meson_gxl_usb2_priv {
+ struct regmap *regmap;
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+ struct udevice *phy_supply;
+#endif
+#if CONFIG_IS_ENABLED(CLK)
+ struct clk clk;
+#endif
+};
+
+static void phy_meson_gxl_usb2_reset(struct phy_meson_gxl_usb2_priv *priv)
+{
+ uint val;
+
+ regmap_read(priv->regmap, U2P_R0, &val);
+
+ /* reset the PHY and wait until settings are stabilized */
+ val |= U2P_R0_POWER_ON_RESET;
+ regmap_write(priv->regmap, U2P_R0, val);
+ udelay(RESET_COMPLETE_TIME);
+
+ val &= ~U2P_R0_POWER_ON_RESET;
+ regmap_write(priv->regmap, U2P_R0, val);
+ udelay(RESET_COMPLETE_TIME);
+}
+
+static void
+phy_meson_gxl_usb2_set_host_mode(struct phy_meson_gxl_usb2_priv *priv)
+{
+ uint val;
+
+ regmap_read(priv->regmap, U2P_R0, &val);
+ val |= U2P_R0_DM_PULLDOWN;
+ val |= U2P_R0_DP_PULLDOWN;
+ val &= ~U2P_R0_ID_PULLUP;
+ regmap_write(priv->regmap, U2P_R0, val);
+
+ phy_meson_gxl_usb2_reset(priv);
+}
+
+static int phy_meson_gxl_usb2_power_on(struct phy *phy)
+{
+ struct udevice *dev = phy->dev;
+ struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
+ uint val;
+
+ regmap_read(priv->regmap, U2P_R0, &val);
+ /* power on the PHY by taking it out of reset mode */
+ val &= ~U2P_R0_POWER_ON_RESET;
+ regmap_write(priv->regmap, U2P_R0, val);
+
+ phy_meson_gxl_usb2_set_host_mode(priv);
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+ if (priv->phy_supply) {
+ int ret = regulator_set_enable(priv->phy_supply, true);
+ if (ret)
+ return ret;
+ }
+#endif
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb2_power_off(struct phy *phy)
+{
+ struct udevice *dev = phy->dev;
+ struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
+ uint val;
+
+ regmap_read(priv->regmap, U2P_R0, &val);
+ /* power off the PHY by putting it into reset mode */
+ val |= U2P_R0_POWER_ON_RESET;
+ regmap_write(priv->regmap, U2P_R0, val);
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+ if (priv->phy_supply) {
+ int ret = regulator_set_enable(priv->phy_supply, false);
+ if (ret) {
+ pr_err("Error disabling PHY supply\n");
+ return ret;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+struct phy_ops meson_gxl_usb2_phy_ops = {
+ .power_on = phy_meson_gxl_usb2_power_on,
+ .power_off = phy_meson_gxl_usb2_power_off,
+};
+
+int meson_gxl_usb2_phy_probe(struct udevice *dev)
+{
+ struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = regmap_init_mem(dev, &priv->regmap);
+ if (ret)
+ return ret;
+
+#if CONFIG_IS_ENABLED(CLK)
+ ret = clk_get_by_index(dev, 0, &priv->clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&priv->clk);
+ if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
+ pr_err("failed to enable PHY clock\n");
+ clk_free(&priv->clk);
+ return ret;
+ }
+#endif
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+ ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
+ if (ret && ret != -ENOENT) {
+ pr_err("Failed to get PHY regulator\n");
+ return ret;
+ }
+#endif
+
+ return 0;
+}
+
+static const struct udevice_id meson_gxl_usb2_phy_ids[] = {
+ { .compatible = "amlogic,meson-gxl-usb2-phy" },
+ { }
+};
+
+U_BOOT_DRIVER(meson_gxl_usb2_phy) = {
+ .name = "meson_gxl_usb2_phy",
+ .id = UCLASS_PHY,
+ .of_match = meson_gxl_usb2_phy_ids,
+ .probe = meson_gxl_usb2_phy_probe,
+ .ops = &meson_gxl_usb2_phy_ops,
+ .priv_auto_alloc_size = sizeof(struct phy_meson_gxl_usb2_priv),
+};
diff --git a/drivers/phy/meson-gxl-usb3.c b/drivers/phy/meson-gxl-usb3.c
new file mode 100644
index 0000000..a385fbd
--- /dev/null
+++ b/drivers/phy/meson-gxl-usb3.c
@@ -0,0 +1,201 @@
+/*
+ * Meson GXL USB3 PHY driver
+ *
+ * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstron at baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <bitfield.h>
+#include <dm.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <clk.h>
+
+#include <linux/bitops.h>
+#include <linux/compat.h>
+#include <linux/bitfield.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define USB_R0 0x00
+ #define USB_R0_P30_FSEL_MASK GENMASK(5, 0)
+ #define USB_R0_P30_PHY_RESET BIT(6)
+ #define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7)
+ #define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8)
+ #define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9)
+ #define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14)
+ #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17)
+ #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18)
+ #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19)
+ #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29)
+ #define USB_R0_U2D_ACT BIT(31)
+
+#define USB_R1 0x04
+ #define USB_R1_U3H_BIGENDIAN_GS BIT(0)
+ #define USB_R1_U3H_PME_ENABLE BIT(1)
+ #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2)
+ #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7)
+ #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12)
+ #define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16)
+ #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17)
+ #define USB_R1_U3H_HOST_MSI_ENABLE BIT(18)
+ #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19)
+ #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25)
+
+#define USB_R2 0x08
+ #define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0)
+ #define USB_R2_P30_CR_READ BIT(16)
+ #define USB_R2_P30_CR_WRITE BIT(17)
+ #define USB_R2_P30_CR_CAP_ADDR BIT(18)
+ #define USB_R2_P30_CR_CAP_DATA BIT(19)
+ #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20)
+ #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26)
+
+#define USB_R3 0x0c
+ #define USB_R3_P30_SSC_ENABLE BIT(0)
+ #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1)
+ #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4)
+ #define USB_R3_P30_REF_SSP_EN BIT(13)
+ #define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16)
+ #define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19)
+ #define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24)
+
+#define USB_R4 0x10
+ #define USB_R4_P21_PORT_RESET_0 BIT(0)
+ #define USB_R4_P21_SLEEP_M0 BIT(1)
+ #define USB_R4_MEM_PD_MASK GENMASK(3, 2)
+ #define USB_R4_P21_ONLY BIT(4)
+
+#define USB_R5 0x14
+ #define USB_R5_ID_DIG_SYNC BIT(0)
+ #define USB_R5_ID_DIG_REG BIT(1)
+ #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2)
+ #define USB_R5_ID_DIG_EN_0 BIT(4)
+ #define USB_R5_ID_DIG_EN_1 BIT(5)
+ #define USB_R5_ID_DIG_CURR BIT(6)
+ #define USB_R5_ID_DIG_IRQ BIT(7)
+ #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8)
+ #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16)
+
+/* read-only register */
+#define USB_R6 0x18
+ #define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0)
+ #define USB_R6_P30_CR_ACK BIT(16)
+
+struct phy_meson_gxl_usb3_priv {
+ struct regmap *regmap;
+#if CONFIG_IS_ENABLED(CLK)
+ struct clk clk;
+#endif
+};
+
+static int
+phy_meson_gxl_usb3_set_host_mode(struct phy_meson_gxl_usb3_priv *priv)
+{
+ uint val;
+
+ regmap_read(priv->regmap, USB_R0, &val);
+ val &= ~USB_R0_U2D_ACT;
+ regmap_write(priv->regmap, USB_R0, val);
+
+ regmap_read(priv->regmap, USB_R4, &val);
+ val &= ~USB_R4_P21_SLEEP_M0;
+ regmap_write(priv->regmap, USB_R4, val);
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb3_power_on(struct phy *phy)
+{
+ struct udevice *dev = phy->dev;
+ struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev);
+ uint val;
+
+ regmap_read(priv->regmap, USB_R5, &val);
+ val |= USB_R5_ID_DIG_EN_0;
+ val |= USB_R5_ID_DIG_EN_1;
+ val &= ~USB_R5_ID_DIG_TH_MASK;
+ val |= FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff);
+ regmap_write(priv->regmap, USB_R5, val);
+
+ return phy_meson_gxl_usb3_set_host_mode(priv);
+}
+
+static int phy_meson_gxl_usb3_power_off(struct phy *phy)
+{
+ struct udevice *dev = phy->dev;
+ struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev);
+ uint val;
+
+ regmap_read(priv->regmap, USB_R5, &val);
+ val &= ~USB_R5_ID_DIG_EN_0;
+ val &= ~USB_R5_ID_DIG_EN_1;
+ regmap_write(priv->regmap, USB_R5, val);
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb3_init(struct phy *phy)
+{
+ struct udevice *dev = phy->dev;
+ struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev);
+ uint val;
+
+ regmap_read(priv->regmap, USB_R1, &val);
+ val &= ~USB_R1_U3H_FLADJ_30MHZ_REG_MASK;
+ val |= FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20);
+ regmap_write(priv->regmap, USB_R1, val);
+
+ return 0;
+}
+
+struct phy_ops meson_gxl_usb3_phy_ops = {
+ .init = phy_meson_gxl_usb3_init,
+ .power_on = phy_meson_gxl_usb3_power_on,
+ .power_off = phy_meson_gxl_usb3_power_off,
+};
+
+int meson_gxl_usb3_phy_probe(struct udevice *dev)
+{
+ struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = regmap_init_mem(dev, &priv->regmap);
+ if (ret)
+ return ret;
+
+#if CONFIG_IS_ENABLED(CLK)
+ ret = clk_get_by_index(dev, 0, &priv->clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&priv->clk);
+ if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
+ pr_err("failed to enable PHY clock\n");
+ clk_free(&priv->clk);
+ return ret;
+ }
+#endif
+
+ return 0;
+}
+
+static const struct udevice_id meson_gxl_usb3_phy_ids[] = {
+ { .compatible = "amlogic,meson-gxl-usb3-phy" },
+ { }
+};
+
+U_BOOT_DRIVER(meson_gxl_usb3_phy) = {
+ .name = "meson_gxl_usb3_phy",
+ .id = UCLASS_PHY,
+ .of_match = meson_gxl_usb3_phy_ids,
+ .probe = meson_gxl_usb3_phy_probe,
+ .ops = &meson_gxl_usb3_phy_ops,
+ .priv_auto_alloc_size = sizeof(struct phy_meson_gxl_usb3_priv),
+};
--
2.7.4
More information about the U-Boot
mailing list