[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Siva Durga Prasad Paladugu]

Hi Jaehoon,

I would like to send v3 for this series, Any specific branch that you want me to rebase the series?

Thanks,
DP

> -----Original Message-----
> From: Jaehoon Chung [mailto:jh80.chung at samsung.com]
> Sent: Wednesday, January 17, 2018 8:04 AM
> To: Siva Durga Prasad Paladugu <sivadur at xilinx.com>; u-
> boot at lists.denx.de
> Subject: Re: [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
> 
> Hi Siva,
> 
> On 01/16/2018 07:10 PM, Siva Durga Prasad Paladugu wrote:
> > Hi Jaehoon,
> >
> > Any review comments on this.
> 
> Thanks for reminding. Will check! :)
> 
> Best Regards,
> Jaehoon Chung
> >
> > Thanks,
> > Siva
> >
> >> -----Original Message-----
> >> From: Siva Durga Prasad Paladugu
> >> [mailto:siva.durga.paladugu at xilinx.com]
> >> Sent: Thursday, January 04, 2018 3:11 PM
> >> To: u-boot at lists.denx.de
> >> Cc: jh80.chung at samsung.com; Siva Durga Prasad Paladugu
> >> <sivadur at xilinx.com>
> >> Subject: [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
> >>
> >> This patch series is meant to add SD3.0 support for ZynqMP platform.
> >> The first five patches in the series mostly setting up things in
> >> sdhci layer to support SD3.0 , the sixth patch is to add SD3.0
> >> support for ZynqMP platform and the last patch is to enable this
> >> support for ZynqMP zcu102
> >> rev1.0 eval board.
> >>
> >> Repo: u-boot-mmc.git
> >> Branch: hs200-working
> >>
> >> Siva Durga Prasad Paladugu (7):
> >>   mmc: sdhci: Add support for disabling clock
> >>   mmc: sdhci: Handle execute tuning command in sdhci_send_command
> >>   sdhci: Add new sdhci ops for platform specific tuning and delays
> >>   mmc: sdhci: Invoke platform specific tuning and delay routines
> >>   mmc : sdhci: Read capabilities register1 and update host caps
> >>   mmc: zynq_sdhci: Add support for SD3.0
> >>   zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
> >>
> >>  board/xilinx/zynqmp/Makefile                  |   2 +
> >>  board/xilinx/zynqmp/tap_delays.c              | 230
> >> ++++++++++++++++++++++++++
> >>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
> >>  drivers/mmc/sdhci.c                           |  67 +++++++-
> >>  drivers/mmc/zynq_sdhci.c                      | 230
> >> +++++++++++++++++++++++++-
> >>  include/sdhci.h                               |   9 +
> >>  include/zynqmp_tap_delay.h                    |  20 +++
> >>  7 files changed, 550 insertions(+), 10 deletions(-)  create mode
> >> 100644 board/xilinx/zynqmp/tap_delays.c  create mode 100644
> >> include/zynqmp_tap_delay.h
> >>
> >> --
> >> 2.7.4
> >
> >
> >
> >