[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Siva Durga Prasad Paladugu]

Hi Jaehoon,

Ping!

Thanks,
Siva

> -----Original Message-----
> From: Siva Durga Prasad Paladugu
> Sent: Tuesday, April 10, 2018 12:02 PM
> To: Jaehoon Chung <jh80.chung at samsung.com>; u-boot at lists.denx.de
> Subject: RE: [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
> 
> Hi Jaehoon,
> 
> I would like to send v3 for this series, Any specific branch that you want me
> to rebase the series?
> 
> Thanks,
> DP
> 
> > -----Original Message-----
> > From: Jaehoon Chung [mailto:jh80.chung at samsung.com]
> > Sent: Wednesday, January 17, 2018 8:04 AM
> > To: Siva Durga Prasad Paladugu <sivadur at xilinx.com>; u-
> > boot at lists.denx.de
> > Subject: Re: [PATCH v2 0/7] Add support of SD3.0 UHS modes for
> ZynqMP
> >
> > Hi Siva,
> >
> > On 01/16/2018 07:10 PM, Siva Durga Prasad Paladugu wrote:
> > > Hi Jaehoon,
> > >
> > > Any review comments on this.
> >
> > Thanks for reminding. Will check! :)
> >
> > Best Regards,
> > Jaehoon Chung
> > >
> > > Thanks,
> > > Siva
> > >
> > >> -----Original Message-----
> > >> From: Siva Durga Prasad Paladugu
> > >> [mailto:siva.durga.paladugu at xilinx.com]
> > >> Sent: Thursday, January 04, 2018 3:11 PM
> > >> To: u-boot at lists.denx.de
> > >> Cc: jh80.chung at samsung.com; Siva Durga Prasad Paladugu
> > >> <sivadur at xilinx.com>
> > >> Subject: [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
> > >>
> > >> This patch series is meant to add SD3.0 support for ZynqMP platform.
> > >> The first five patches in the series mostly setting up things in
> > >> sdhci layer to support SD3.0 , the sixth patch is to add SD3.0
> > >> support for ZynqMP platform and the last patch is to enable this
> > >> support for ZynqMP zcu102
> > >> rev1.0 eval board.
> > >>
> > >> Repo: u-boot-mmc.git
> > >> Branch: hs200-working
> > >>
> > >> Siva Durga Prasad Paladugu (7):
> > >>   mmc: sdhci: Add support for disabling clock
> > >>   mmc: sdhci: Handle execute tuning command in
> sdhci_send_command
> > >>   sdhci: Add new sdhci ops for platform specific tuning and delays
> > >>   mmc: sdhci: Invoke platform specific tuning and delay routines
> > >>   mmc : sdhci: Read capabilities register1 and update host caps
> > >>   mmc: zynq_sdhci: Add support for SD3.0
> > >>   zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
> > >>
> > >>  board/xilinx/zynqmp/Makefile                  |   2 +
> > >>  board/xilinx/zynqmp/tap_delays.c              | 230
> > >> ++++++++++++++++++++++++++
> > >>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
> > >>  drivers/mmc/sdhci.c                           |  67 +++++++-
> > >>  drivers/mmc/zynq_sdhci.c                      | 230
> > >> +++++++++++++++++++++++++-
> > >>  include/sdhci.h                               |   9 +
> > >>  include/zynqmp_tap_delay.h                    |  20 +++
> > >>  7 files changed, 550 insertions(+), 10 deletions(-)  create mode
> > >> 100644 board/xilinx/zynqmp/tap_delays.c  create mode 100644
> > >> include/zynqmp_tap_delay.h
> > >>
> > >> --
> > >> 2.7.4
> > >
> > >
> > >
> > >