[U-Boot] [PATCH] db410c: set clk node to be probed before relocation

[Ramon Fried]

The clock node is used by the serial driver and it's needed
before relocation.
This patch ensures that the msm-serial driver can actually
use the clock node.

Signed-off-by: Ramon Fried <ramon.fried at linaro.org>
---
 arch/arm/dts/dragonboard410c.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
index 5ccfe7f8c8..f37ef5d523 100644
--- a/arch/arm/dts/dragonboard410c.dts
+++ b/arch/arm/dts/dragonboard410c.dts
@@ -38,12 +38,14 @@
 		#size-cells = <0x1>;
 		ranges = <0x0 0x0 0x0 0xffffffff>;
 		compatible = "simple-bus";
+		u-boot,dm-pre-reloc;
 
 		clkc: qcom,gcc at 1800000 {
 			compatible = "qcom,gcc-apq8016";
 			reg = <0x1800000 0x80000>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
+			u-boot,dm-pre-reloc;
 		};
 
 		serial at 78b0000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project